# Primitive Type f32

1.0.0 ·
Expand description

A 32-bit floating point type (specifically, the “binary32” type defined in IEEE 754-2008).

This type can represent a wide range of decimal numbers, like `3.5`, `27`, `-113.75`, `0.0078125`, `34359738368`, `0`, `-1`. So unlike integer types (such as `i32`), floating point types can represent non-integer numbers, too.

However, being able to represent this wide range of numbers comes at the cost of precision: floats can only represent some of the real numbers and calculation with floats round to a nearby representable number. For example, `5.0` and `1.0` can be exactly represented as `f32`, but `1.0 / 5.0` results in `0.20000000298023223876953125` since `0.2` cannot be exactly represented as `f32`. Note, however, that printing floats with `println` and friends will often discard insignificant digits: `println!("{}", 1.0f32 / 5.0f32)` will print `0.2`.

Additionally, `f32` can represent some special values:

- −0.0: IEEE 754 floating point numbers have a bit that indicates their sign, so −0.0 is a possible value. For comparison −0.0 = +0.0, but floating point operations can carry the sign bit through arithmetic operations. This means −0.0 × +0.0 produces −0.0 and a negative number rounded to a value smaller than a float can represent also produces −0.0.
- ∞ and −∞: these result from calculations like `1.0 / 0.0`.
- NaN (not a number): this value results from calculations like `(-1.0).sqrt()`. NaN has some potentially unexpected behavior:
  - It is unequal to any float, including itself! This is the reason `f32` doesn’t implement the `Eq` trait.
  - It is also neither smaller nor greater than any float, making it impossible to sort by the default comparison operation, which is the reason `f32` doesn’t implement the `Ord` trait.
  - It is also considered infectious as almost all calculations where one of the operands is NaN will also result in NaN. The explanations on this page only explicitly document behavior on NaN operands if this default is deviated from.
  - Lastly, there are multiple bit patterns that are considered NaN. Rust does not currently guarantee that the bit patterns of NaN are preserved over arithmetic operations, and they are not guaranteed to be portable or even fully deterministic! This means that there may be some surprising results upon inspecting the bit patterns, as the same calculations might produce NaNs with different bit patterns.

When the number resulting from a primitive operation (addition, subtraction, multiplication, or division) on this type is not exactly representable as `f32`, it is rounded according to the roundTiesToEven direction defined in IEEE 754-2008. That means:

- The result is the representable value closest to the true value, if there is a unique closest representable value.
- If the true value is exactly half-way between two representable values, the result is the one with an even least-significant binary digit.
- If the true value’s magnitude is ≥ `f32::MAX` + 2(`f32::MAX_EXP` − `f32::MANTISSA_DIGITS` − 1), the result is ∞ or −∞ (preserving the true value’s sign).

For more information on floating point numbers, see Wikipedia.

See also the `std::f32::consts` module.

## Implementations§

source§

### impl f32

source

#### pub fn floor(self) -> f32

Returns the largest integer less than or equal to `self`.

##### Examples

    let f = 3.7_f32;
    let g = 3.0_f32;
    let h = -3.7_f32;

    assert_eq!(f.floor(), 3.0);
    assert_eq!(g.floor(), 3.0);
    assert_eq!(h.floor(), -4.0);

Run
source

#### pub fn ceil(self) -> f32

Returns the smallest integer greater than or equal to `self`.

##### Examples

    let f = 3.01_f32;
    let g = 4.0_f32;

    assert_eq!(f.ceil(), 4.0);
    assert_eq!(g.ceil(), 4.0);

Run
source

#### pub fn round(self) -> f32

Returns the nearest integer to `self`. Round half-way cases away from `0.0`.

##### Examples

    let f = 3.3_f32;
    let g = -3.3_f32;
    let h = -3.7_f32;

    assert_eq!(f.round(), 3.0);
    assert_eq!(g.round(), -3.0);
    assert_eq!(h.round(), -4.0);

Run
source

#### pub fn trunc(self) -> f32

Returns the integer part of `self`. This means that non-integer numbers are always truncated towards zero.

##### Examples

    let f = 3.7_f32;
    let g = 3.0_f32;
    let h = -3.7_f32;

    assert_eq!(f.trunc(), 3.0);
    assert_eq!(g.trunc(), 3.0);
    assert_eq!(h.trunc(), -3.0);

Run
source

#### pub fn fract(self) -> f32

Returns the fractional part of `self`.

##### Examples

    let x = 3.6_f32;
    let y = -3.6_f32;
    let abs_difference_x = (x.fract() - 0.6).abs();
    let abs_difference_y = (y.fract() - (-0.6)).abs();

    assert!(abs_difference_x <= f32::EPSILON);
    assert!(abs_difference_y <= f32::EPSILON);

Run
source

#### pub fn abs(self) -> f32

Computes the absolute value of `self`.

##### Examples

    let x = 3.5_f32;
    let y = -3.5_f32;

    let abs_difference_x = (x.abs() - x).abs();
    let abs_difference_y = (y.abs() - (-y)).abs();

    assert!(abs_difference_x <= f32::EPSILON);
    assert!(abs_difference_y <= f32::EPSILON);

    assert!(f32::NAN.abs().is_nan());

Run
source

#### pub fn signum(self) -> f32

Returns a number that represents the sign of `self`.

- `1.0` if the number is positive, `+0.0` or `INFINITY`
- `-1.0` if the number is negative, `-0.0` or `NEG_INFINITY`
- NaN if the number is NaN

##### Examples

    let f = 3.5_f32;

    assert_eq!(f.signum(), 1.0);
    assert_eq!(f32::NEG_INFINITY.signum(), -1.0);

    assert!(f32::NAN.signum().is_nan());

Run
1.35.0 · source

#### pub fn copysign(self, sign: f32) -> f32

Returns a number composed of the magnitude of `self` and the sign of `sign`.

Equal to `self` if the sign of `self` and `sign` are the same, otherwise equal to `-self`. If `self` is a NaN, then a NaN with the sign bit of `sign` is returned. Note, however, that conserving the sign bit on NaN across arithmetical operations is not generally guaranteed. See explanation of NaN as a special value for more info.

##### Examples

    let f = 3.5_f32;

    assert_eq!(f.copysign(0.42), 3.5_f32);
    assert_eq!(f.copysign(-0.42), -3.5_f32);
    assert_eq!((-f).copysign(0.42), 3.5_f32);
    assert_eq!((-f).copysign(-0.42), -3.5_f32);

    assert!(f32::NAN.copysign(1.0).is_nan());

Run
source

#### pub fn mul_add(self, a: f32, b: f32) -> f32

Fused multiply-add. Computes `(self * a) + b` with only one rounding error, yielding a more accurate result than an unfused multiply-add.

Using `mul_add` may be more performant than an unfused multiply-add if the target architecture has a dedicated `fma` CPU instruction. However, this is not always true, and will be heavily dependant on designing algorithms with specific target hardware in mind.

##### Examples

    let m = 10.0_f32;
    let x = 4.0_f32;
    let b = 60.0_f32;

    // 100.0
    let abs_difference = (m.mul_add(x, b) - ((m * x) + b)).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
1.38.0 · source

#### pub fn div_euclid(self, rhs: f32) -> f32

Calculates Euclidean division, the matching method for `rem_euclid`.

This computes the integer `n` such that `self = n * rhs + self.rem_euclid(rhs)`. In other words, the result is `self / rhs` rounded to the integer `n` such that `self >= n * rhs`.

##### Examples

    let a: f32 = 7.0;
    let b = 4.0;
    assert_eq!(a.div_euclid(b), 1.0); // 7.0 > 4.0 * 1.0
    assert_eq!((-a).div_euclid(b), -2.0); // -7.0 >= 4.0 * -2.0
    assert_eq!(a.div_euclid(-b), -1.0); // 7.0 >= -4.0 * -1.0
    assert_eq!((-a).div_euclid(-b), 2.0); // -7.0 >= -4.0 * 2.0

Run
1.38.0 · source

#### pub fn rem_euclid(self, rhs: f32) -> f32

Calculates the least nonnegative remainder of `self (mod rhs)`.

In particular, the return value `r` satisfies `0.0 <= r < rhs.abs()` in most cases. However, due to a floating point round-off error it can result in `r == rhs.abs()`, violating the mathematical definition, if `self` is much smaller than `rhs.abs()` in magnitude and `self < 0.0`. This result is not an element of the function’s codomain, but it is the closest floating point number in the real numbers and thus fulfills the property `self == self.div_euclid(rhs) * rhs + self.rem_euclid(rhs)` approximately.

##### Examples

    let a: f32 = 7.0;
    let b = 4.0;
    assert_eq!(a.rem_euclid(b), 3.0);
    assert_eq!((-a).rem_euclid(b), 1.0);
    assert_eq!(a.rem_euclid(-b), 3.0);
    assert_eq!((-a).rem_euclid(-b), 1.0);
    // limitation due to round-off error
    assert!((-f32::EPSILON).rem_euclid(3.0) != 0.0);

Run
source

#### pub fn powi(self, n: i32) -> f32

Raises a number to an integer power.

Using this function is generally faster than using `powf`. It might have a different sequence of rounding operations than `powf`, so the results are not guaranteed to agree.

##### Examples

    let x = 2.0_f32;
    let abs_difference = (x.powi(2) - (x * x)).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn powf(self, n: f32) -> f32

Raises a number to a floating point power.

##### Examples

    let x = 2.0_f32;
    let abs_difference = (x.powf(2.0) - (x * x)).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn sqrt(self) -> f32

Returns the square root of a number.

Returns NaN if `self` is a negative number other than `-0.0`.

##### Examples

    let positive = 4.0_f32;
    let negative = -4.0_f32;
    let negative_zero = -0.0_f32;

    let abs_difference = (positive.sqrt() - 2.0).abs();

    assert!(abs_difference <= f32::EPSILON);
    assert!(negative.sqrt().is_nan());
    assert!(negative_zero.sqrt() == negative_zero);

Run
source

#### pub fn exp(self) -> f32

Returns `e^(self)`, (the exponential function).

##### Examples

    let one = 1.0f32;
    // e^1
    let e = one.exp();

    // ln(e) - 1 == 0
    let abs_difference = (e.ln() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn exp2(self) -> f32

Returns `2^(self)`.

##### Examples

    let f = 2.0f32;

    // 2^2 - 4 == 0
    let abs_difference = (f.exp2() - 4.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn ln(self) -> f32

Returns the natural logarithm of the number.

##### Examples

    let one = 1.0f32;
    // e^1
    let e = one.exp();

    // ln(e) - 1 == 0
    let abs_difference = (e.ln() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn log(self, base: f32) -> f32

Returns the logarithm of the number with respect to an arbitrary base.

The result might not be correctly rounded owing to implementation details; `self.log2()` can produce more accurate results for base 2, and `self.log10()` can produce more accurate results for base 10.

##### Examples

    let five = 5.0f32;

    // log5(5) - 1 == 0
    let abs_difference = (five.log(5.0) - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn log2(self) -> f32

Returns the base 2 logarithm of the number.

##### Examples

    let two = 2.0f32;

    // log2(2) - 1 == 0
    let abs_difference = (two.log2() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn log10(self) -> f32

Returns the base 10 logarithm of the number.

##### Examples

    let ten = 10.0f32;

    // log10(10) - 1 == 0
    let abs_difference = (ten.log10() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn abs_sub(self, other: f32) -> f32

👎Deprecated since 1.10.0: you probably meant `(self - other).abs()`: this operation is `(self - other).max(0.0)` except that `abs_sub` also propagates NaNs (also known as `fdimf` in C). If you truly need the positive difference, consider using that expression or the C function `fdimf`, depending on how you wish to handle NaN (please consider filing an issue describing your use-case too).

The positive difference of two numbers.

- If `self <= other`: `0:0`
- Else: `self - other`

##### Examples

    let x = 3.0f32;
    let y = -3.0f32;

    let abs_difference_x = (x.abs_sub(1.0) - 2.0).abs();
    let abs_difference_y = (y.abs_sub(1.0) - 0.0).abs();

    assert!(abs_difference_x <= f32::EPSILON);
    assert!(abs_difference_y <= f32::EPSILON);

Run
source

#### pub fn cbrt(self) -> f32

Returns the cube root of a number.

##### Examples

    let x = 8.0f32;

    // x^(1/3) - 2 == 0
    let abs_difference = (x.cbrt() - 2.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn hypot(self, other: f32) -> f32

Calculates the length of the hypotenuse of a right-angle triangle given legs of length `x` and `y`.

##### Examples

    let x = 2.0f32;
    let y = 3.0f32;

    // sqrt(x^2 + y^2)
    let abs_difference = (x.hypot(y) - (x.powi(2) + y.powi(2)).sqrt()).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn sin(self) -> f32

Computes the sine of a number (in radians).

##### Examples

    let x = std::f32::consts::FRAC_PI_2;

    let abs_difference = (x.sin() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn cos(self) -> f32

Computes the cosine of a number (in radians).

##### Examples

    let x = 2.0 * std::f32::consts::PI;

    let abs_difference = (x.cos() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn tan(self) -> f32

Computes the tangent of a number (in radians).

##### Examples

    let x = std::f32::consts::FRAC_PI_4;
    let abs_difference = (x.tan() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn asin(self) -> f32

Computes the arcsine of a number. Return value is in radians in the range [-pi/2, pi/2] or NaN if the number is outside the range [-1, 1].

##### Examples

    let f = std::f32::consts::FRAC_PI_2;

    // asin(sin(pi/2))
    let abs_difference = (f.sin().asin() - std::f32::consts::FRAC_PI_2).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn acos(self) -> f32

Computes the arccosine of a number. Return value is in radians in the range [0, pi] or NaN if the number is outside the range [-1, 1].

##### Examples

    let f = std::f32::consts::FRAC_PI_4;

    // acos(cos(pi/4))
    let abs_difference = (f.cos().acos() - std::f32::consts::FRAC_PI_4).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn atan(self) -> f32

Computes the arctangent of a number. Return value is in radians in the range [-pi/2, pi/2];

##### Examples

    let f = 1.0f32;

    // atan(tan(1))
    let abs_difference = (f.tan().atan() - 1.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn atan2(self, other: f32) -> f32

Computes the four quadrant arctangent of `self` (`y`) and `other` (`x`) in radians.

- `x = 0`, `y = 0`: `0`
- `x >= 0`: `arctan(y/x)` -> `[-pi/2, pi/2]`
- `y >= 0`: `arctan(y/x) + pi` -> `(pi/2, pi]`
- `y < 0`: `arctan(y/x) - pi` -> `(-pi, -pi/2)`

##### Examples

    // Positive angles measured counter-clockwise
    // from positive x axis
    // -pi/4 radians (45 deg clockwise)
    let x1 = 3.0f32;
    let y1 = -3.0f32;

    // 3pi/4 radians (135 deg counter-clockwise)
    let x2 = -3.0f32;
    let y2 = 3.0f32;

    let abs_difference_1 = (y1.atan2(x1) - (-std::f32::consts::FRAC_PI_4)).abs();
    let abs_difference_2 = (y2.atan2(x2) - (3.0 * std::f32::consts::FRAC_PI_4)).abs();

    assert!(abs_difference_1 <= f32::EPSILON);
    assert!(abs_difference_2 <= f32::EPSILON);

Run
source

#### pub fn sin_cos(self) -> (f32, f32)

Simultaneously computes the sine and cosine of the number, `x`. Returns `(sin(x), cos(x))`.

##### Examples

    let x = std::f32::consts::FRAC_PI_4;
    let f = x.sin_cos();

    let abs_difference_0 = (f.0 - x.sin()).abs();
    let abs_difference_1 = (f.1 - x.cos()).abs();

    assert!(abs_difference_0 <= f32::EPSILON);
    assert!(abs_difference_1 <= f32::EPSILON);

Run
source

#### pub fn exp_m1(self) -> f32

Returns `e^(self) - 1` in a way that is accurate even if the number is close to zero.

##### Examples

    let x = 1e-8_f32;

    // for very small x, e^x is approximately 1 + x + x^2 / 2
    let approx = x + x * x / 2.0;
    let abs_difference = (x.exp_m1() - approx).abs();

    assert!(abs_difference < 1e-10);

Run
source

#### pub fn ln_1p(self) -> f32

Returns `ln(1+n)` (natural logarithm) more accurately than if the operations were performed separately.

##### Examples

    let x = 1e-8_f32;

    // for very small x, ln(1 + x) is approximately x - x^2 / 2
    let approx = x - x * x / 2.0;
    let abs_difference = (x.ln_1p() - approx).abs();

    assert!(abs_difference < 1e-10);

Run
source

#### pub fn sinh(self) -> f32

Hyperbolic sine function.

##### Examples

    let e = std::f32::consts::E;
    let x = 1.0f32;

    let f = x.sinh();
    // Solving sinh() at 1 gives `(e^2-1)/(2e)`
    let g = ((e * e) - 1.0) / (2.0 * e);
    let abs_difference = (f - g).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn cosh(self) -> f32

Hyperbolic cosine function.

##### Examples

    let e = std::f32::consts::E;
    let x = 1.0f32;
    let f = x.cosh();
    // Solving cosh() at 1 gives this result
    let g = ((e * e) + 1.0) / (2.0 * e);
    let abs_difference = (f - g).abs();

    // Same result
    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn tanh(self) -> f32

Hyperbolic tangent function.

##### Examples

    let e = std::f32::consts::E;
    let x = 1.0f32;

    let f = x.tanh();
    // Solving tanh() at 1 gives `(1 - e^(-2))/(1 + e^(-2))`
    let g = (1.0 - e.powi(-2)) / (1.0 + e.powi(-2));
    let abs_difference = (f - g).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn asinh(self) -> f32

Inverse hyperbolic sine function.

##### Examples

    let x = 1.0f32;
    let f = x.sinh().asinh();

    let abs_difference = (f - x).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn acosh(self) -> f32

Inverse hyperbolic cosine function.

##### Examples

    let x = 1.0f32;
    let f = x.cosh().acosh();

    let abs_difference = (f - x).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn atanh(self) -> f32

Inverse hyperbolic tangent function.

##### Examples

    let e = std::f32::consts::E;
    let f = e.tanh().atanh();

    let abs_difference = (f - e).abs();

    assert!(abs_difference <= 1e-5);

Run
source§

### impl f32

1.43.0 · source

#### pub const RADIX: u32 = 2u32

The radix or base of the internal representation of `f32`.

1.43.0 · source

#### pub const MANTISSA_DIGITS: u32 = 24u32

Number of significant digits in base 2.

1.43.0 · source

#### pub const DIGITS: u32 = 6u32

Approximate number of significant digits in base 10.

1.43.0 · source

#### pub const EPSILON: f32 = 1.1920929E-7f32

Machine epsilon value for `f32`.

This is the difference between `1.0` and the next larger representable number.

1.43.0 · source

#### pub const MIN: f32 = -3.40282347E+38f32

Smallest finite `f32` value.

1.43.0 · source

#### pub const MIN_POSITIVE: f32 = 1.17549435E-38f32

Smallest positive normal `f32` value.

1.43.0 · source

#### pub const MAX: f32 = 3.40282347E+38f32

Largest finite `f32` value.

1.43.0 · source

#### pub const MIN_EXP: i32 = -125i32

One greater than the minimum possible normal power of 2 exponent.

1.43.0 · source

#### pub const MAX_EXP: i32 = 128i32

Maximum possible power of 2 exponent.

1.43.0 · source

#### pub const MIN_10_EXP: i32 = -37i32

Minimum possible normal power of 10 exponent.

1.43.0 · source

#### pub const MAX_10_EXP: i32 = 38i32

Maximum possible power of 10 exponent.

1.43.0 · source

#### pub const NAN: f32 = NaNf32

Not a Number (NaN).

Note that IEEE 754 doesn’t define just a single NaN value; a plethora of bit patterns are considered to be NaN. Furthermore, the standard makes a difference between a “signaling” and a “quiet” NaN, and allows inspecting its “payload” (the unspecified bits in the bit pattern). This constant isn’t guaranteed to equal to any specific NaN bitpattern, and the stability of its representation over Rust versions and target platforms isn’t guaranteed.

1.43.0 · source

#### pub const INFINITY: f32 = +Inff32

Infinity (∞).

1.43.0 · source

#### pub const NEG_INFINITY: f32 = -Inff32

Negative infinity (−∞).

const: unstable · source

#### pub fn is_nan(self) -> bool

Returns `true` if this value is NaN.

    let nan = f32::NAN;
    let f = 7.0_f32;

    assert!(nan.is_nan());
    assert!(!f.is_nan());

Run
const: unstable · source

#### pub fn is_infinite(self) -> bool

Returns `true` if this value is positive infinity or negative infinity, and `false` otherwise.

    let f = 7.0f32;
    let inf = f32::INFINITY;
    let neg_inf = f32::NEG_INFINITY;
    let nan = f32::NAN;

    assert!(!f.is_infinite());
    assert!(!nan.is_infinite());

    assert!(inf.is_infinite());
    assert!(neg_inf.is_infinite());

Run
const: unstable · source

#### pub fn is_finite(self) -> bool

Returns `true` if this number is neither infinite nor NaN.

    let f = 7.0f32;
    let inf = f32::INFINITY;
    let neg_inf = f32::NEG_INFINITY;
    let nan = f32::NAN;

    assert!(f.is_finite());

    assert!(!nan.is_finite());
    assert!(!inf.is_finite());
    assert!(!neg_inf.is_finite());

Run
1.53.0 (const: unstable) · source

#### pub fn is_subnormal(self) -> bool

Returns `true` if the number is subnormal.

    let min = f32::MIN_POSITIVE; // 1.17549435e-38f32
    let max = f32::MAX;
    let lower_than_min = 1.0e-40_f32;
    let zero = 0.0_f32;

    assert!(!min.is_subnormal());
    assert!(!max.is_subnormal());

    assert!(!zero.is_subnormal());
    assert!(!f32::NAN.is_subnormal());
    assert!(!f32::INFINITY.is_subnormal());
    // Values between `0` and `min` are Subnormal.
    assert!(lower_than_min.is_subnormal());

Run
const: unstable · source

#### pub fn is_normal(self) -> bool

Returns `true` if the number is neither zero, infinite, subnormal, or NaN.

    let min = f32::MIN_POSITIVE; // 1.17549435e-38f32
    let max = f32::MAX;
    let lower_than_min = 1.0e-40_f32;
    let zero = 0.0_f32;

    assert!(min.is_normal());
    assert!(max.is_normal());

    assert!(!zero.is_normal());
    assert!(!f32::NAN.is_normal());
    assert!(!f32::INFINITY.is_normal());
    // Values between `0` and `min` are Subnormal.
    assert!(!lower_than_min.is_normal());

Run
const: unstable · source

#### pub fn classify(self) -> FpCategory

Returns the floating point category of the number. If only one property is going to be tested, it is generally faster to use the specific predicate instead.

    use std::num::FpCategory;

    let num = 12.4_f32;
    let inf = f32::INFINITY;

    assert_eq!(num.classify(), FpCategory::Normal);
    assert_eq!(inf.classify(), FpCategory::Infinite);

Run
const: unstable · source

#### pub fn is_sign_positive(self) -> bool

Returns `true` if `self` has a positive sign, including `+0.0`, NaNs with positive sign bit and positive infinity. Note that IEEE 754 doesn’t assign any meaning to the sign bit in case of a NaN, and as Rust doesn’t guarantee that the bit pattern of NaNs are conserved over arithmetic operations, the result of `is_sign_positive` on a NaN might produce an unexpected result in some cases. See explanation of NaN as a special value for more info.

    let f = 7.0_f32;
    let g = -7.0_f32;

    assert!(f.is_sign_positive());
    assert!(!g.is_sign_positive());

Run
const: unstable · source

#### pub fn is_sign_negative(self) -> bool

Returns `true` if `self` has a negative sign, including `-0.0`, NaNs with negative sign bit and negative infinity. Note that IEEE 754 doesn’t assign any meaning to the sign bit in case of a NaN, and as Rust doesn’t guarantee that the bit pattern of NaNs are conserved over arithmetic operations, the result of `is_sign_negative` on a NaN might produce an unexpected result in some cases. See explanation of NaN as a special value for more info.

    let f = 7.0f32;
    let g = -7.0f32;

    assert!(!f.is_sign_negative());
    assert!(g.is_sign_negative());

Run
const: unstable · source

#### pub fn next_up(self) -> f32

🔬This is a nightly-only experimental API. (`float_next_up_down` #91399)

Returns the least number greater than `self`.

Let `TINY` be the smallest representable positive `f32`. Then,

- if `self.is_nan()`, this returns `self`;
- if `self` is `NEG_INFINITY`, this returns `MIN`;
- if `self` is `-TINY`, this returns -0.0;
- if `self` is -0.0 or +0.0, this returns `TINY`;
- if `self` is `MAX` or `INFINITY`, this returns `INFINITY`;
- otherwise the unique least value greater than `self` is returned.

The identity `x.next_up() == -(-x).next_down()` holds for all non-NaN `x`. When `x` is finite `x == x.next_up().next_down()` also holds.

    #![feature(float_next_up_down)]
    // f32::EPSILON is the difference between 1.0 and the next number up.
    assert_eq!(1.0f32.next_up(), 1.0 + f32::EPSILON);
    // But not for most numbers.
    assert!(0.1f32.next_up() < 0.1 + f32::EPSILON);
    assert_eq!(16777216f32.next_up(), 16777218.0);

Run
const: unstable · source

#### pub fn next_down(self) -> f32

🔬This is a nightly-only experimental API. (`float_next_up_down` #91399)

Returns the greatest number less than `self`.

Let `TINY` be the smallest representable positive `f32`. Then,

- if `self.is_nan()`, this returns `self`;
- if `self` is `INFINITY`, this returns `MAX`;
- if `self` is `TINY`, this returns 0.0;
- if `self` is -0.0 or +0.0, this returns `-TINY`;
- if `self` is `MIN` or `NEG_INFINITY`, this returns `NEG_INFINITY`;
- otherwise the unique greatest value less than `self` is returned.

The identity `x.next_down() == -(-x).next_up()` holds for all non-NaN `x`. When `x` is finite `x == x.next_down().next_up()` also holds.

    #![feature(float_next_up_down)]
    let x = 1.0f32;
    // Clamp value into range [0, 1).
    let clamped = x.clamp(0.0, 1.0f32.next_down());
    assert!(clamped < 1.0);
    assert_eq!(clamped.next_up(), 1.0);

Run
source

#### pub fn recip(self) -> f32

Takes the reciprocal (inverse) of a number, `1/x`.

    let x = 2.0_f32;
    let abs_difference = (x.recip() - (1.0 / x)).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
1.7.0 · source

#### pub fn to_degrees(self) -> f32

Converts radians to degrees.

    let angle = std::f32::consts::PI;

    let abs_difference = (angle.to_degrees() - 180.0).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
1.7.0 · source

#### pub fn to_radians(self) -> f32

Converts degrees to radians.

    let angle = 180.0f32;

    let abs_difference = (angle.to_radians() - std::f32::consts::PI).abs();

    assert!(abs_difference <= f32::EPSILON);

Run
source

#### pub fn max(self, other: f32) -> f32

Returns the maximum of the two numbers, ignoring NaN.

If one of the arguments is NaN, then the other argument is returned. This follows the IEEE 754-2008 semantics for maxNum, except for handling of signaling NaNs; this function handles all NaNs the same way and avoids maxNum’s problems with associativity. This also matches the behavior of libm’s fmax.

    let x = 1.0f32;
    let y = 2.0f32;

    assert_eq!(x.max(y), y);

Run
source

#### pub fn min(self, other: f32) -> f32

Returns the minimum of the two numbers, ignoring NaN.

If one of the arguments is NaN, then the other argument is returned. This follows the IEEE 754-2008 semantics for minNum, except for handling of signaling NaNs; this function handles all NaNs the same way and avoids minNum’s problems with associativity. This also matches the behavior of libm’s fmin.

    let x = 1.0f32;
    let y = 2.0f32;

    assert_eq!(x.min(y), x);

Run
source

#### pub fn maximum(self, other: f32) -> f32

🔬This is a nightly-only experimental API. (`float_minimum_maximum` #91079)

Returns the maximum of the two numbers, propagating NaN.

This returns NaN when either argument is NaN, as opposed to `f32::max` which only returns NaN when both arguments are NaN.

    #![feature(float_minimum_maximum)]
    let x = 1.0f32;
    let y = 2.0f32;

    assert_eq!(x.maximum(y), y);
    assert!(x.maximum(f32::NAN).is_nan());

Run

If one of the arguments is NaN, then NaN is returned. Otherwise this returns the greater of the two numbers. For this operation, -0.0 is considered to be less than +0.0. Note that this follows the semantics specified in IEEE 754-2019.

Also note that “propagation” of NaNs here doesn’t necessarily mean that the bitpattern of a NaN operand is conserved; see explanation of NaN as a special value for more info.

source

#### pub fn minimum(self, other: f32) -> f32

🔬This is a nightly-only experimental API. (`float_minimum_maximum` #91079)

Returns the minimum of the two numbers, propagating NaN.

This returns NaN when either argument is NaN, as opposed to `f32::min` which only returns NaN when both arguments are NaN.

    #![feature(float_minimum_maximum)]
    let x = 1.0f32;
    let y = 2.0f32;

    assert_eq!(x.minimum(y), x);
    assert!(x.minimum(f32::NAN).is_nan());

Run

If one of the arguments is NaN, then NaN is returned. Otherwise this returns the lesser of the two numbers. For this operation, -0.0 is considered to be less than +0.0. Note that this follows the semantics specified in IEEE 754-2019.

Also note that “propagation” of NaNs here doesn’t necessarily mean that the bitpattern of a NaN operand is conserved; see explanation of NaN as a special value for more info.

1.44.0 · source

#### pub unsafe fn to_int_unchecked<Int>(self) -> Intwhere
f32: FloatToInt<Int>,

Rounds toward zero and converts to any primitive integer type, assuming that the value is finite and fits in that type.

    let value = 4.6_f32;
    let rounded = unsafe { value.to_int_unchecked::<u16>() };
    assert_eq!(rounded, 4);

    let value = -128.9_f32;
    let rounded = unsafe { value.to_int_unchecked::<i8>() };
    assert_eq!(rounded, i8::MIN);

Run

##### Safety

The value must:

- Not be `NaN`
- Not be infinite
- Be representable in the return type `Int`, after truncating off its fractional part

1.20.0 (const: unstable) · source

#### pub fn to_bits(self) -> u32

Raw transmutation to `u32`.

This is currently identical to `transmute::<f32, u32>(self)` on all platforms.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

Note that this function is distinct from `as` casting, which attempts to preserve the numeric value, and not the bitwise value.

##### Examples

    assert_ne!((1f32).to_bits(), 1f32 as u32); // to_bits() is not casting!
    assert_eq!((12.5f32).to_bits(), 0x41480000);

Run
1.20.0 (const: unstable) · source

#### pub fn from_bits(v: u32) -> f32

Raw transmutation from `u32`.

This is currently identical to `transmute::<u32, f32>(v)` on all platforms. It turns out this is incredibly portable, for two reasons:

- Floats and Ints have the same endianness on all supported platforms.
- IEEE 754 very precisely specifies the bit layout of floats.

However there is one caveat: prior to the 2008 version of IEEE 754, how to interpret the NaN signaling bit wasn’t actually specified. Most platforms (notably x86 and ARM) picked the interpretation that was ultimately standardized in 2008, but some didn’t (notably MIPS). As a result, all signaling NaNs on MIPS are quiet NaNs on x86, and vice-versa.

Rather than trying to preserve signaling-ness cross-platform, this implementation favors preserving the exact bits. This means that any payloads encoded in NaNs will be preserved even if the result of this method is sent over the network from an x86 machine to a MIPS one.

If the results of this method are only manipulated by the same architecture that produced them, then there is no portability concern.

If the input isn’t NaN, then there is no portability concern.

If you don’t care about signalingness (very likely), then there is no portability concern.

Note that this function is distinct from `as` casting, which attempts to preserve the numeric value, and not the bitwise value.

##### Examples

    let v = f32::from_bits(0x41480000);
    assert_eq!(v, 12.5);

Run
1.40.0 (const: unstable) · source

#### pub fn to_be_bytes(self) -> [u8; 4]

Return the memory representation of this floating point number as a byte array in big-endian (network) byte order.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let bytes = 12.5f32.to_be_bytes();
    assert_eq!(bytes, [0x41, 0x48, 0x00, 0x00]);

Run
1.40.0 (const: unstable) · source

#### pub fn to_le_bytes(self) -> [u8; 4]

Return the memory representation of this floating point number as a byte array in little-endian byte order.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let bytes = 12.5f32.to_le_bytes();
    assert_eq!(bytes, [0x00, 0x00, 0x48, 0x41]);

Run
1.40.0 (const: unstable) · source

#### pub fn to_ne_bytes(self) -> [u8; 4]

Return the memory representation of this floating point number as a byte array in native byte order.

As the target platform’s native endianness is used, portable code should use `to_be_bytes` or `to_le_bytes`, as appropriate, instead.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let bytes = 12.5f32.to_ne_bytes();
    assert_eq!(
        bytes,
        if cfg!(target_endian = "big") {
            [0x41, 0x48, 0x00, 0x00]
        } else {
            [0x00, 0x00, 0x48, 0x41]
        }
    );

Run
1.40.0 (const: unstable) · source

#### pub fn from_be_bytes(bytes: [u8; 4]) -> f32

Create a floating point value from its representation as a byte array in big endian.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let value = f32::from_be_bytes([0x41, 0x48, 0x00, 0x00]);
    assert_eq!(value, 12.5);

Run
1.40.0 (const: unstable) · source

#### pub fn from_le_bytes(bytes: [u8; 4]) -> f32

Create a floating point value from its representation as a byte array in little endian.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let value = f32::from_le_bytes([0x00, 0x00, 0x48, 0x41]);
    assert_eq!(value, 12.5);

Run
1.40.0 (const: unstable) · source

#### pub fn from_ne_bytes(bytes: [u8; 4]) -> f32

Create a floating point value from its representation as a byte array in native endian.

As the target platform’s native endianness is used, portable code likely wants to use `from_be_bytes` or `from_le_bytes`, as appropriate instead.

See `from_bits` for some discussion of the portability of this operation (there are almost no issues).

##### Examples

    let value = f32::from_ne_bytes(if cfg!(target_endian = "big") {
        [0x41, 0x48, 0x00, 0x00]
    } else {
        [0x00, 0x00, 0x48, 0x41]
    });
    assert_eq!(value, 12.5);

Run
1.62.0 · source

#### pub fn total_cmp(&self, other: &f32) -> Ordering

Return the ordering between `self` and `other`.

Unlike the standard partial comparison between floating point numbers, this comparison always produces an ordering in accordance to the `totalOrder` predicate as defined in the IEEE 754 (2008 revision) floating point standard. The values are ordered in the following sequence:

- negative quiet NaN
- negative signaling NaN
- negative infinity
- negative numbers
- negative subnormal numbers
- negative zero
- positive zero
- positive subnormal numbers
- positive numbers
- positive infinity
- positive signaling NaN
- positive quiet NaN.

The ordering established by this function does not always agree with the `PartialOrd` and `PartialEq` implementations of `f32`. For example, they consider negative and positive zero equal, while `total_cmp` doesn’t.

The interpretation of the signaling NaN bit follows the definition in the IEEE 754 standard, which may not match the interpretation by some of the older, non-conformant (e.g. MIPS) hardware implementations.

##### Example

    struct GoodBoy {
        name: String,
        weight: f32,
    }

    let mut bois = vec![
        GoodBoy { name: "Pucci".to_owned(), weight: 0.1 },
        GoodBoy { name: "Woofer".to_owned(), weight: 99.0 },
        GoodBoy { name: "Yapper".to_owned(), weight: 10.0 },
        GoodBoy { name: "Chonk".to_owned(), weight: f32::INFINITY },
        GoodBoy { name: "Abs. Unit".to_owned(), weight: f32::NAN },
        GoodBoy { name: "Floaty".to_owned(), weight: -5.0 },
    ];

    bois.sort_by(|a, b| a.weight.total_cmp(&b.weight));

Run
1.50.0 · source

#### pub fn clamp(self, min: f32, max: f32) -> f32

Restrict a value to a certain interval unless it is NaN.

Returns `max` if `self` is greater than `max`, and `min` if `self` is less than `min`. Otherwise this returns `self`.

Note that this function returns NaN if the initial value was NaN as well.

##### Panics

Panics if `min > max`, `min` is NaN, or `max` is NaN.

##### Examples

    assert!((-3.0f32).clamp(-2.0, 1.0) == -2.0);
    assert!((0.0f32).clamp(-2.0, 1.0) == 0.0);
    assert!((2.0f32).clamp(-2.0, 1.0) == 1.0);
    assert!((f32::NAN).clamp(-2.0, 1.0).is_nan());

Run

## Trait Implementations§

const: unstable · source§

### impl Add<&f32> for &f32

§

#### type Output = <f32 as Add<f32>>::Output

The resulting type after applying the `+` operator.
const: unstable · source§

#### fn add(self, other: &f32) -> <f32 as Add<f32>>::Output

Performs the `+` operation. Read more
const: unstable · source§

### impl Add<&f32> for f32

§

#### type Output = <f32 as Add<f32>>::Output

The resulting type after applying the `+` operator.
const: unstable · source§

#### fn add(self, other: &f32) -> <f32 as Add<f32>>::Output

Performs the `+` operation. Read more
const: unstable · source§

### impl<'a> Add<f32> for &'a f32

§

#### type Output = <f32 as Add<f32>>::Output

The resulting type after applying the `+` operator.
const: unstable · source§

#### fn add(self, other: f32) -> <f32 as Add<f32>>::Output

Performs the `+` operation. Read more
const: unstable · source§

### impl Add<f32> for f32

§

#### type Output = f32

The resulting type after applying the `+` operator.
const: unstable · source§

#### fn add(self, other: f32) -> f32

Performs the `+` operation. Read more
1.22.0 (const: unstable) · source§

### impl AddAssign<&f32> for f32

const: unstable · source§

#### fn add_assign(&mut self, other: &f32)

Performs the `+=` operation. Read more
1.8.0 (const: unstable) · source§

### impl AddAssign<f32> for f32

const: unstable · source§

#### fn add_assign(&mut self, other: f32)

Performs the `+=` operation. Read more
const: unstable · source§

### impl Clone for f32

const: unstable · source§

#### fn clone(&self) -> f32

Returns a copy of the value. Read more
source§

#### fn clone_from(&mut self, source: &Self)

Performs copy-assignment from `source`. Read more
source§

### impl Debug for f32

source§

#### fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
const: unstable · source§

### impl Default for f32

const: unstable · source§

#### fn default() -> f32

Returns the default value of `0.0`

source§

### impl Display for f32

source§

#### fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
const: unstable · source§

### impl Div<&f32> for &f32

§

#### type Output = <f32 as Div<f32>>::Output

The resulting type after applying the `/` operator.
const: unstable · source§

#### fn div(self, other: &f32) -> <f32 as Div<f32>>::Output

Performs the `/` operation. Read more
const: unstable · source§

### impl Div<&f32> for f32

§

#### type Output = <f32 as Div<f32>>::Output

The resulting type after applying the `/` operator.
const: unstable · source§

#### fn div(self, other: &f32) -> <f32 as Div<f32>>::Output

Performs the `/` operation. Read more
const: unstable · source§

### impl<'a> Div<f32> for &'a f32

§

#### type Output = <f32 as Div<f32>>::Output

The resulting type after applying the `/` operator.
const: unstable · source§

#### fn div(self, other: f32) -> <f32 as Div<f32>>::Output

Performs the `/` operation. Read more
const: unstable · source§

### impl Div<f32> for f32

§

#### type Output = f32

The resulting type after applying the `/` operator.
const: unstable · source§

#### fn div(self, other: f32) -> f32

Performs the `/` operation. Read more
1.22.0 (const: unstable) · source§

### impl DivAssign<&f32> for f32

const: unstable · source§

#### fn div_assign(&mut self, other: &f32)

Performs the `/=` operation. Read more
1.8.0 (const: unstable) · source§

### impl DivAssign<f32> for f32

const: unstable · source§

#### fn div_assign(&mut self, other: f32)

Performs the `/=` operation. Read more
1.68.0-nightly (const: unstable) · source§

### impl From<bool> for f32

const: unstable · source§

#### fn from(small: bool) -> f32

Converts `bool` to `f32` losslessly.

1.6.0 (const: unstable) · source§

### impl From<f32> for f64

const: unstable · source§

#### fn from(small: f32) -> f64

Converts `f32` to `f64` losslessly.

1.6.0 (const: unstable) · source§

### impl From<i16> for f32

const: unstable · source§

#### fn from(small: i16) -> f32

Converts `i16` to `f32` losslessly.

1.6.0 (const: unstable) · source§

### impl From<i8> for f32

const: unstable · source§

#### fn from(small: i8) -> f32

Converts `i8` to `f32` losslessly.

1.6.0 (const: unstable) · source§

### impl From<u16> for f32

const: unstable · source§

#### fn from(small: u16) -> f32

Converts `u16` to `f32` losslessly.

1.6.0 (const: unstable) · source§

### impl From<u8> for f32

const: unstable · source§

#### fn from(small: u8) -> f32

Converts `u8` to `f32` losslessly.

source§

### impl FromStr for f32

source§

#### fn from_str(src: &str) -> Result<f32, ParseFloatError>

Converts a string in base 10 to a float. Accepts an optional decimal exponent.

This function accepts strings such as

- ‘3.14’
- ‘-3.14’
- ‘2.5E10’, or equivalently, ‘2.5e10’
- ‘2.5E-10’
- ‘5.’
- ‘.5’, or, equivalently, ‘0.5’
- ‘inf’, ‘-inf’, ‘+infinity’, ‘NaN’

Note that alphabetical characters are not case-sensitive.

Leading and trailing whitespace represent an error.

##### Grammar

All strings that adhere to the following EBNF grammar when lowercased will result in an `Ok` being returned:

    Float  ::= Sign? ( 'inf' | 'infinity' | 'nan' | Number )
    Number ::= ( Digit+ |
                 Digit+ '.' Digit* |
                 Digit* '.' Digit+ ) Exp?
    Exp    ::= 'e' Sign? Digit+
    Sign   ::= [+-]
    Digit  ::= [0-9]

##### Arguments

- src - A string

##### Return value

`Err(ParseFloatError)` if the string did not represent a valid number. Otherwise, `Ok(n)` where `n` is the closest representable floating-point number to the number represented by `src` (following the same rules for rounding as for the results of primitive operations).

§

#### type Err = ParseFloatError

The associated error which can be returned from parsing.
source§

### impl LowerExp for f32

source§

#### fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.
const: unstable · source§

### impl Mul<&f32> for &f32

§

#### type Output = <f32 as Mul<f32>>::Output

The resulting type after applying the `*` operator.
const: unstable · source§

#### fn mul(self, other: &f32) -> <f32 as Mul<f32>>::Output

Performs the `*` operation. Read more
const: unstable · source§

### impl Mul<&f32> for f32

§

#### type Output = <f32 as Mul<f32>>::Output

The resulting type after applying the `*` operator.
const: unstable · source§

#### fn mul(self, other: &f32) -> <f32 as Mul<f32>>::Output

Performs the `*` operation. Read more
const: unstable · source§

### impl<'a> Mul<f32> for &'a f32

§

#### type Output = <f32 as Mul<f32>>::Output

The resulting type after applying the `*` operator.
const: unstable · source§

#### fn mul(self, other: f32) -> <f32 as Mul<f32>>::Output

Performs the `*` operation. Read more
const: unstable · source§

### impl Mul<f32> for f32

§

#### type Output = f32

The resulting type after applying the `*` operator.
const: unstable · source§

#### fn mul(self, other: f32) -> f32

Performs the `*` operation. Read more
1.22.0 (const: unstable) · source§

### impl MulAssign<&f32> for f32

const: unstable · source§

#### fn mul_assign(&mut self, other: &f32)

Performs the `*=` operation. Read more
1.8.0 (const: unstable) · source§

### impl MulAssign<f32> for f32

const: unstable · source§

#### fn mul_assign(&mut self, other: f32)

Performs the `*=` operation. Read more
const: unstable · source§

### impl Neg for &f32

§

#### type Output = <f32 as Neg>::Output

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn neg(self) -> <f32 as Neg>::Output

Performs the unary `-` operation. Read more
const: unstable · source§

### impl Neg for f32

§

#### type Output = f32

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn neg(self) -> f32

Performs the unary `-` operation. Read more
const: unstable · source§

### impl PartialEq<f32> for f32

const: unstable · source§

#### fn eq(&self, other: &f32) -> bool

This method tests for `self` and `other` values to be equal, and is used by `==`.
const: unstable · source§

#### fn ne(&self, other: &f32) -> bool

This method tests for `!=`. The default implementation is almost always sufficient, and should not be overridden without very good reason.
const: unstable · source§

### impl PartialOrd<f32> for f32

const: unstable · source§

#### fn partial_cmp(&self, other: &f32) -> Option<Ordering>

This method returns an ordering between `self` and `other` values if one exists. Read more
const: unstable · source§

#### fn lt(&self, other: &f32) -> bool

This method tests less than (for `self` and `other`) and is used by the `<` operator. Read more
const: unstable · source§

#### fn le(&self, other: &f32) -> bool

This method tests less than or equal to (for `self` and `other`) and is used by the `<=` operator. Read more
const: unstable · source§

#### fn ge(&self, other: &f32) -> bool

This method tests greater than or equal to (for `self` and `other`) and is used by the `>=` operator. Read more
const: unstable · source§

#### fn gt(&self, other: &f32) -> bool

This method tests greater than (for `self` and `other`) and is used by the `>` operator. Read more
1.12.0 · source§

### impl<'a> Product<&'a f32> for f32

source§

#### fn product<I>(iter: I) -> f32 where
I: Iterator<Item = &'a f32>,

Method which takes an iterator and generates `Self` from the elements by multiplying the items.
1.12.0 · source§

### impl Product<f32> for f32

source§

#### fn product<I>(iter: I) -> f32 where
I: Iterator<Item = f32>,

Method which takes an iterator and generates `Self` from the elements by multiplying the items.
const: unstable · source§

### impl Rem<&f32> for &f32

§

#### type Output = <f32 as Rem<f32>>::Output

The resulting type after applying the `%` operator.
const: unstable · source§

#### fn rem(self, other: &f32) -> <f32 as Rem<f32>>::Output

Performs the `%` operation. Read more
const: unstable · source§

### impl Rem<&f32> for f32

§

#### type Output = <f32 as Rem<f32>>::Output

The resulting type after applying the `%` operator.
const: unstable · source§

#### fn rem(self, other: &f32) -> <f32 as Rem<f32>>::Output

Performs the `%` operation. Read more
const: unstable · source§

### impl<'a> Rem<f32> for &'a f32

§

#### type Output = <f32 as Rem<f32>>::Output

The resulting type after applying the `%` operator.
const: unstable · source§

#### fn rem(self, other: f32) -> <f32 as Rem<f32>>::Output

Performs the `%` operation. Read more
const: unstable · source§

### impl Rem<f32> for f32

The remainder from the division of two floats.

The remainder has the same sign as the dividend and is computed as: `x - (x / y).trunc() * y`.

#### Examples

    let x: f32 = 50.50;
    let y: f32 = 8.125;
    let remainder = x - (x / y).trunc() * y;

    // The answer to both operations is 1.75
    assert_eq!(x % y, remainder);

Run
§

#### type Output = f32

The resulting type after applying the `%` operator.
const: unstable · source§

#### fn rem(self, other: f32) -> f32

Performs the `%` operation. Read more
1.22.0 (const: unstable) · source§

### impl RemAssign<&f32> for f32

const: unstable · source§

#### fn rem_assign(&mut self, other: &f32)

Performs the `%=` operation. Read more
1.8.0 (const: unstable) · source§

### impl RemAssign<f32> for f32

const: unstable · source§

#### fn rem_assign(&mut self, other: f32)

Performs the `%=` operation. Read more
source§

### impl SimdElement for f32

§

#### type Mask = i32

🔬This is a nightly-only experimental API. (`portable_simd` #86656)
The mask element type corresponding to this element type.
const: unstable · source§

### impl Sub<&f32> for &f32

§

#### type Output = <f32 as Sub<f32>>::Output

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn sub(self, other: &f32) -> <f32 as Sub<f32>>::Output

Performs the `-` operation. Read more
const: unstable · source§

### impl Sub<&f32> for f32

§

#### type Output = <f32 as Sub<f32>>::Output

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn sub(self, other: &f32) -> <f32 as Sub<f32>>::Output

Performs the `-` operation. Read more
const: unstable · source§

### impl<'a> Sub<f32> for &'a f32

§

#### type Output = <f32 as Sub<f32>>::Output

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn sub(self, other: f32) -> <f32 as Sub<f32>>::Output

Performs the `-` operation. Read more
const: unstable · source§

### impl Sub<f32> for f32

§

#### type Output = f32

The resulting type after applying the `-` operator.
const: unstable · source§

#### fn sub(self, other: f32) -> f32

Performs the `-` operation. Read more
1.22.0 (const: unstable) · source§

### impl SubAssign<&f32> for f32

const: unstable · source§

#### fn sub_assign(&mut self, other: &f32)

Performs the `-=` operation. Read more
1.8.0 (const: unstable) · source§

### impl SubAssign<f32> for f32

const: unstable · source§

#### fn sub_assign(&mut self, other: f32)

Performs the `-=` operation. Read more
1.12.0 · source§

### impl<'a> Sum<&'a f32> for f32

source§

#### fn sum<I>(iter: I) -> f32 where
I: Iterator<Item = &'a f32>,

Method which takes an iterator and generates `Self` from the elements by “summing up” the items.
1.12.0 · source§

### impl Sum<f32> for f32

source§

#### fn sum<I>(iter: I) -> f32 where
I: Iterator<Item = f32>,

Method which takes an iterator and generates `Self` from the elements by “summing up” the items.
source§

### impl UpperExp for f32

source§

#### fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.
source§

### impl Copy for f32

source§

### impl FloatToInt<i128> for f32

source§

### impl FloatToInt<i16> for f32

source§

### impl FloatToInt<i32> for f32

source§

### impl FloatToInt<i64> for f32

source§

### impl FloatToInt<i8> for f32

source§

### impl FloatToInt<isize> for f32

source§

### impl FloatToInt<u128> for f32

source§

### impl FloatToInt<u16> for f32

source§

### impl FloatToInt<u32> for f32

source§

### impl FloatToInt<u64> for f32

source§

### impl FloatToInt<u8> for f32

source§

### impl FloatToInt<usize> for f32

## Auto Trait Implementations§

§

### impl RefUnwindSafe for f32

§

### impl Send for f32

§

### impl Sync for f32

§

### impl Unpin for f32

§

### impl UnwindSafe for f32

## Blanket Implementations§

source§

### impl<T> Any for Twhere
T: 'static + ?Sized,

source§

#### fn type_id(&self) -> TypeId

Gets the `TypeId` of `self`. Read more
source§

### impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

#### fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

### impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

#### fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

### impl<T> From<T> for T

const: unstable · source§

#### fn from(t: T) -> T

Returns the argument unchanged.

source§

### impl<T, U> Into<U> for Twhere
U: From<T>,

const: unstable · source§

#### fn into(self) -> U

Calls `U::from(self)`.

That is, this conversion is whatever the implementation of `From<T> for U` chooses to do.

source§

### impl<T> ToOwned for Twhere
T: Clone,

§

#### type Owned = T

The resulting type after obtaining ownership.
source§

#### fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

#### fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

### impl<T> ToString for Twhere
T: Display + ?Sized,

source§

#### default fn to_string(&self) -> String

Converts the given value to a `String`. Read more
source§

### impl<T, U> TryFrom<U> for Twhere
U: Into<T>,

§

#### type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

#### fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

### impl<T, U> TryInto<U> for Twhere
U: TryFrom<T>,

§

#### type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

#### fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.