# Buffer Protocol

Certain objects available in Python wrap access to an underlying memory array or buffer. Such objects include the built-in `bytes` and `bytearray`, and some extension types like `array.array`. Third-party libraries may define their own types for special purposes, such as image processing or numeric analysis.

While each of these types have their own semantics, they share the common characteristic of being backed by a possibly large memory buffer. It is then desirable, in some situations, to access that buffer directly and without intermediate copying.

Python provides such a facility at the C level in the form of the buffer protocol. This protocol has two sides:

- on the producer side, a type can export a “buffer interface” which allows objects of that type to expose information about their underlying buffer. This interface is described in the section Buffer Object Structures;

- on the consumer side, several means are available to obtain a pointer to the raw underlying data of an object (for example a method parameter).

Simple objects such as `bytes` and `bytearray` expose their underlying buffer in byte-oriented form. Other forms are possible; for example, the elements exposed by an `array.array` can be multi-byte values.

An example consumer of the buffer interface is the `write()` method of file objects: any object that can export a series of bytes through the buffer interface can be written to a file. While `write()` only needs read-only access to the internal contents of the object passed to it, other methods such as `readinto()` need write access to the contents of their argument. The buffer interface allows objects to selectively allow or reject exporting of read-write and read-only buffers.

There are two ways for a consumer of the buffer interface to acquire a buffer over a target object:

- call `PyObject_GetBuffer()` with the right parameters;

- call `PyArg_ParseTuple()` (or one of its siblings) with one of the `y*`, `w*` or `s*` format codes.

In both cases, `PyBuffer_Release()` must be called when the buffer isn’t needed anymore. Failure to do so could lead to various issues such as resource leaks.

## Buffer structure

Buffer structures (or simply “buffers”) are useful as a way to expose the binary data from another object to the Python programmer. They can also be used as a zero-copy slicing mechanism. Using their ability to reference a block of memory, it is possible to expose any data to the Python programmer quite easily. The memory could be a large, constant array in a C extension, it could be a raw block of memory for manipulation before passing to an operating system library, or it could be used to pass around structured data in its native, in-memory format.

Contrary to most data types exposed by the Python interpreter, buffers are not `PyObject` pointers but rather simple C structures. This allows them to be created and copied very simply. When a generic wrapper around a buffer is needed, a memoryview object can be created.

For short instructions how to write an exporting object, see Buffer Object Structures. For obtaining a buffer, see `PyObject_GetBuffer()`.

type Py_buffer
  Part of the Stable ABI (including all members) since version 3.11.
  void *buf

    A pointer to the start of the logical structure described by the buffer fields. This can be any location within the underlying physical memory block of the exporter. For example, with negative `strides` the value may point to the end of the memory block.

    For contiguous arrays, the value points to the beginning of the memory block.

  PyObject *obj

    A new reference to the exporting object. The reference is owned by the consumer and automatically released (i.e. reference count decremented) and set to `NULL` by `PyBuffer_Release()`. The field is the equivalent of the return value of any standard C-API function.

    As a special case, for temporary buffers that are wrapped by `PyMemoryView_FromBuffer()` or `PyBuffer_FillInfo()` this field is `NULL`. In general, exporting objects MUST NOT use this scheme.

  Py_ssize_t len

    `product(shape) * itemsize`. For contiguous arrays, this is the length of the underlying memory block. For non-contiguous arrays, it is the length that the logical structure would have if it were copied to a contiguous representation.

    Accessing `((char *)buf)[0] up to ((char *)buf)[len-1]` is only valid if the buffer has been obtained by a request that guarantees contiguity. In most cases such a request will be `PyBUF_SIMPLE` or `PyBUF_WRITABLE`.

  int readonly

    An indicator of whether the buffer is read-only. This field is controlled by the `PyBUF_WRITABLE` flag.

  Py_ssize_t itemsize

    Item size in bytes of a single element. Same as the value of `struct.calcsize()` called on non-`NULL` `format` values.

    Important exception: If a consumer requests a buffer without the `PyBUF_FORMAT` flag, `format` will be set to `NULL`, but `itemsize` still has the value for the original format.

    If `shape` is present, the equality `product(shape) * itemsize == len` still holds and the consumer can use `itemsize` to navigate the buffer.

    If `shape` is `NULL` as a result of a `PyBUF_SIMPLE` or a `PyBUF_WRITABLE` request, the consumer must disregard `itemsize` and assume `itemsize == 1`.

  char *format

    A NULL terminated string in `struct` module style syntax describing the contents of a single item. If this is `NULL`, `"B"` (unsigned bytes) is assumed.

    This field is controlled by the `PyBUF_FORMAT` flag.

  int ndim

    The number of dimensions the memory represents as an n-dimensional array. If it is `0`, `buf` points to a single item representing a scalar. In this case, `shape`, `strides` and `suboffsets` MUST be `NULL`. The maximum number of dimensions is given by `PyBUF_MAX_NDIM`.

  Py_ssize_t *shape

    An array of `Py_ssize_t` of length `ndim` indicating the shape of the memory as an n-dimensional array. Note that `shape[0] * ... * shape[ndim-1] * itemsize` MUST be equal to `len`.

    Shape values are restricted to `shape[n] >= 0`. The case `shape[n] == 0` requires special attention. See complex arrays for further information.

    The shape array is read-only for the consumer.

  Py_ssize_t *strides

    An array of `Py_ssize_t` of length `ndim` giving the number of bytes to skip to get to a new element in each dimension.

    Stride values can be any integer. For regular arrays, strides are usually positive, but a consumer MUST be able to handle the case `strides[n] <= 0`. See complex arrays for further information.

    The strides array is read-only for the consumer.

  Py_ssize_t *suboffsets

    An array of `Py_ssize_t` of length `ndim`. If `suboffsets[n] >= 0`, the values stored along the nth dimension are pointers and the suboffset value dictates how many bytes to add to each pointer after de-referencing. A suboffset value that is negative indicates that no de-referencing should occur (striding in a contiguous memory block).

    If all suboffsets are negative (i.e. no de-referencing is needed), then this field must be `NULL` (the default value).

    This type of array representation is used by the Python Imaging Library (PIL). See complex arrays for further information how to access elements of such an array.

    The suboffsets array is read-only for the consumer.

  void *internal

    This is for use internally by the exporting object. For example, this might be re-cast as an integer by the exporter and used to store flags about whether or not the shape, strides, and suboffsets arrays must be freed when the buffer is released. The consumer MUST NOT alter this value.

Constants:

PyBUF_MAX_NDIM

  The maximum number of dimensions the memory represents. Exporters MUST respect this limit, consumers of multi-dimensional buffers SHOULD be able to handle up to `PyBUF_MAX_NDIM` dimensions. Currently set to 64.

## Buffer request types

Buffers are usually obtained by sending a buffer request to an exporting object via `PyObject_GetBuffer()`. Since the complexity of the logical structure of the memory can vary drastically, the consumer uses the flags argument to specify the exact buffer type it can handle.

All `Py_buffer` fields are unambiguously defined by the request type.

### request-independent fields

The following fields are not influenced by flags and must always be filled in with the correct values: `obj`, `buf`, `len`, `itemsize`, `ndim`.

### readonly, format

> PyBUF_WRITABLE

>   Controls the `readonly` field. If set, the exporter MUST provide a writable buffer or else report failure. Otherwise, the exporter MAY provide either a read-only or writable buffer, but the choice MUST be consistent for all consumers.

> PyBUF_FORMAT

>   Controls the `format` field. If set, this field MUST be filled in correctly. Otherwise, this field MUST be `NULL`.

`PyBUF_WRITABLE` can be |’d to any of the flags in the next section. Since `PyBUF_SIMPLE` is defined as 0, `PyBUF_WRITABLE` can be used as a stand-alone flag to request a simple writable buffer.

`PyBUF_FORMAT` can be |’d to any of the flags except `PyBUF_SIMPLE`. The latter already implies format `B` (unsigned bytes).

### shape, strides, suboffsets

The flags that control the logical structure of the memory are listed in decreasing order of complexity. Note that each flag contains all bits of the flags below it.

Request | shape | strides | suboffsets
--- | --- | --- | ---
PyBUF_INDIRECT | yes | yes | if needed
PyBUF_STRIDES | yes | yes | NULL
PyBUF_ND | yes | NULL | NULL
PyBUF_SIMPLE | NULL | NULL | NULL

### contiguity requests

C or Fortran contiguity can be explicitly requested, with and without stride information. Without stride information, the buffer must be C-contiguous.

Request | shape | strides | suboffsets | contig
--- | --- | --- | --- | ---
PyBUF_C_CONTIGUOUS | yes | yes | NULL | C
PyBUF_F_CONTIGUOUS | yes | yes | NULL | F
PyBUF_ANY_CONTIGUOUS | yes | yes | NULL | C or F
`PyBUF_ND` | yes | NULL | NULL | C

### compound requests

All possible requests are fully defined by some combination of the flags in the previous section. For convenience, the buffer protocol provides frequently used combinations as single flags.

In the following table U stands for undefined contiguity. The consumer would have to call `PyBuffer_IsContiguous()` to determine contiguity.

Request | shape | strides | suboffsets | contig | readonly | format
--- | --- | --- | --- | --- | --- | ---
PyBUF_FULL | yes | yes | if needed | U | 0 | yes
PyBUF_FULL_RO | yes | yes | if needed | U | 1 or 0 | yes
PyBUF_RECORDS | yes | yes | NULL | U | 0 | yes
PyBUF_RECORDS_RO | yes | yes | NULL | U | 1 or 0 | yes
PyBUF_STRIDED | yes | yes | NULL | U | 0 | NULL
PyBUF_STRIDED_RO | yes | yes | NULL | U | 1 or 0 | NULL
PyBUF_CONTIG | yes | NULL | NULL | C | 0 | NULL
PyBUF_CONTIG_RO | yes | NULL | NULL | C | 1 or 0 | NULL

## Complex arrays

### NumPy-style: shape and strides

The logical structure of NumPy-style arrays is defined by `itemsize`, `ndim`, `shape` and `strides`.

If `ndim == 0`, the memory location pointed to by `buf` is interpreted as a scalar of size `itemsize`. In that case, both `shape` and `strides` are `NULL`.

If `strides` is `NULL`, the array is interpreted as a standard n-dimensional C-array. Otherwise, the consumer must access an n-dimensional array as follows:

    ptr = (char *)buf + indices[0] * strides[0] + ... + indices[n-1] * strides[n-1];
    item = *((typeof(item) *)ptr);

As noted above, `buf` can point to any location within the actual memory block. An exporter can check the validity of a buffer with this function:

    def verify_structure(memlen, itemsize, ndim, shape, strides, offset):
        """Verify that the parameters represent a valid array within
           the bounds of the allocated memory:
               char *mem: start of the physical memory block
               memlen: length of the physical memory block
               offset: (char *)buf - mem
        """
        if offset % itemsize:
            return False
        if offset < 0 or offset+itemsize > memlen:
            return False
        if any(v % itemsize for v in strides):
            return False

        if ndim <= 0:
            return ndim == 0 and not shape and not strides
        if 0 in shape:
            return True

        imin = sum(strides[j]*(shape[j]-1) for j in range(ndim)
                   if strides[j] <= 0)
        imax = sum(strides[j]*(shape[j]-1) for j in range(ndim)
                   if strides[j] > 0)

        return 0 <= offset+imin and offset+imax+itemsize <= memlen

### PIL-style: shape, strides and suboffsets

In addition to the regular items, PIL-style arrays can contain pointers that must be followed in order to get to the next element in a dimension. For example, the regular three-dimensional C-array `char v[2][2][3]` can also be viewed as an array of 2 pointers to 2 two-dimensional arrays: `char (*v[2])[2][3]`. In suboffsets representation, those two pointers can be embedded at the start of `buf`, pointing to two `char x[2][3]` arrays that can be located anywhere in memory.

Here is a function that returns a pointer to the element in an N-D array pointed to by an N-dimensional index when there are both non-`NULL` strides and suboffsets:

    void *get_item_pointer(int ndim, void *buf, Py_ssize_t *strides,
                           Py_ssize_t *suboffsets, Py_ssize_t *indices) {
        char *pointer = (char*)buf;
        int i;
        for (i = 0; i < ndim; i++) {
            pointer += strides[i] * indices[i];
            if (suboffsets[i] >=0 ) {
                pointer = *((char**)pointer) + suboffsets[i];
            }
        }
        return (void*)pointer;
    }

## Buffer-related functions

int PyObject_CheckBuffer(PyObject *obj)
  Part of the Stable ABI since version 3.11.

  Return `1` if obj supports the buffer interface otherwise `0`. When `1` is returned, it doesn’t guarantee that `PyObject_GetBuffer()` will succeed. This function always succeeds.

int PyObject_GetBuffer(PyObject *exporter, Py_buffer *view, int flags)
  Part of the Stable ABI since version 3.11.

  Send a request to exporter to fill in view as specified by flags. If the exporter cannot provide a buffer of the exact type, it MUST raise `BufferError`, set `view->obj` to `NULL` and return `-1`.

  On success, fill in view, set `view->obj` to a new reference to exporter and return 0. In the case of chained buffer providers that redirect requests to a single object, `view->obj` MAY refer to this object instead of exporter (See Buffer Object Structures).

  Successful calls to `PyObject_GetBuffer()` must be paired with calls to `PyBuffer_Release()`, similar to `malloc()` and `free()`. Thus, after the consumer is done with the buffer, `PyBuffer_Release()` must be called exactly once.

void PyBuffer_Release(Py_buffer *view)
  Part of the Stable ABI since version 3.11.

  Release the buffer view and release the strong reference (i.e. decrement the reference count) to the view’s supporting object, `view->obj`. This function MUST be called when the buffer is no longer being used, otherwise reference leaks may occur.

  It is an error to call this function on a buffer that was not obtained via `PyObject_GetBuffer()`.

Py_ssize_t PyBuffer_SizeFromFormat(const char *format)
  Part of the Stable ABI since version 3.11.

  Return the implied `itemsize` from `format`. On error, raise an exception and return -1.

  Added in version 3.9.

int PyBuffer_IsContiguous(const Py_buffer *view, char order)
  Part of the Stable ABI since version 3.11.

  Return `1` if the memory defined by the view is C-style (order is `'C'`) or Fortran-style (order is `'F'`) contiguous or either one (order is `'A'`). Return `0` otherwise. This function always succeeds.

void *PyBuffer_GetPointer(const Py_buffer *view, const Py_ssize_t *indices)
  Part of the Stable ABI since version 3.11.

  Get the memory area pointed to by the indices inside the given view. indices must point to an array of `view->ndim` indices.

int PyBuffer_FromContiguous(const Py_buffer *view, const void *buf, Py_ssize_t len, char fort)
  Part of the Stable ABI since version 3.11.

  Copy contiguous len bytes from buf to view. fort can be `'C'` or `'F'` (for C-style or Fortran-style ordering). `0` is returned on success, `-1` on error.

int PyBuffer_ToContiguous(void *buf, const Py_buffer *src, Py_ssize_t len, char order)
  Part of the Stable ABI since version 3.11.

  Copy len bytes from src to its contiguous representation in buf. order can be `'C'` or `'F'` or `'A'` (for C-style or Fortran-style ordering or either one). `0` is returned on success, `-1` on error.

  This function fails if len != src->len.

int PyObject_CopyData(PyObject *dest, PyObject *src)
  Part of the Stable ABI since version 3.11.

  Copy data from src to dest buffer. Can convert between C-style and or Fortran-style buffers.

  `0` is returned on success, `-1` on error.

void PyBuffer_FillContiguousStrides(int ndims, Py_ssize_t *shape, Py_ssize_t *strides, int itemsize, char order)
  Part of the Stable ABI since version 3.11.

  Fill the strides array with byte-strides of a contiguous (C-style if order is `'C'` or Fortran-style if order is `'F'`) array of the given shape with the given number of bytes per element.

int PyBuffer_FillInfo(Py_buffer *view, PyObject *exporter, void *buf, Py_ssize_t len, int readonly, int flags)
  Part of the Stable ABI since version 3.11.

  Handle buffer requests for an exporter that wants to expose buf of size len with writability set according to readonly. buf is interpreted as a sequence of unsigned bytes.

  The flags argument indicates the request type. This function always fills in view as specified by flags, unless buf has been designated as read-only and `PyBUF_WRITABLE` is set in flags.

  On success, set `view->obj` to a new reference to exporter and return 0. Otherwise, raise `BufferError`, set `view->obj` to `NULL` and return `-1`;

  If this function is used as part of a getbufferproc, exporter MUST be set to the exporting object and flags must be passed unmodified. Otherwise, exporter MUST be `NULL`.