//////////////////////////////////////////

  Licensed to the Apache Software Foundation (ASF) under one
  or more contributor license agreements.  See the NOTICE file
  distributed with this work for additional information
  regarding copyright ownership.  The ASF licenses this file
  to you under the Apache License, Version 2.0 (the
  "License"); you may not use this file except in compliance
  with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing,
  software distributed under the License is distributed on an
  "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  KIND, either express or implied.  See the License for the
  specific language governing permissions and limitations
  under the License.

//////////////////////////////////////////

= Interacting with a SQL database

Groovy's `groovy-sql` module provides a higher-level abstraction over Java's JDBC technology. JDBC itself provides
a lower-level but fairly comprehensive API which provides uniform access to a whole variety of supported relational database systems.
We'll use HSQLDB in our examples here but you can alternatively use Oracle, SQL Server, MySQL and a host of others.
The most frequently used class within the `groovy-sql` module is the `groovy.sql.Sql` class which raises the JDBC
abstractions up one level. We'll cover that first.

== Connecting to the database

Connecting to a database with Groovy's `Sql` class requires four pieces of information:

* The database uniform resource locator (URL)
* Username
* Password
* The driver class name (which can be derived automatically in some situations)

For our HSQLDB database, the values will be something like that shown in the following table:

[cols="1,1" options="header"]
|====
| Property
| Value

| url
| `jdbc:hsqldb:mem:yourdb`

| user
| sa (or your _username_)

| password
| _yourPassword_

| driver
| `org.hsqldb.jdbcDriver`
|====

Consult the documentation for the JDBC driver that you plan to use to determine the correct values for your situation.

The `Sql` class has a `newInstance` factory method which takes these parameters. You would typically use it as follows:

[source,groovy]
.Connecting to HSQLDB
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_connecting,indent=0]
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_connecting_close,indent=0]
----

If you don't want to have to handle resource handling yourself (i.e. call `close()` manually) then you can use the `withInstance` variation as shown here:

[source,groovy]
.Connecting to HSQLDB (`withInstance` variation)
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_withInstance_p1,indent=0]
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_withInstance_p2,indent=0]
----

=== Connecting with a DataSource

It is often preferred to use a DataSource. You may have one available to you from a connection pool.
Here we'll use the one provided as part of the HSQLDB driver jar as shown here:

[source,groovy]
.Connecting to HSQLDB with a DataSource
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_connecting_datasource,indent=0]
----

If you have your own connection pooling, the details will be different, e.g. for Apache Commons DBCP:

[source,groovy]
.Connecting to HSQLDB with a DataSource using Apache Commons DBCP
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_connecting_datasource_dbcp,indent=0]
----

=== Connecting using @Grab

The previous examples assume that the necessary database driver jar is already on your classpath.
For a self-contained script you can add `@Grab` statements to the top of the script to automatically download the necessary jar as shown here:

[source,groovy]
.Connecting to HSQLDB using @Grab
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_connecting_grab,indent=0]
----

The `@GrabConfig` statement is necessary to make sure the system classloader is used. This ensures that the driver classes and
system classes like `java.sql.DriverManager` are in the same classloader.

== Executing SQL

You can execute arbitrary SQL commands using the `execute()` method. Let's have a look at using it to create a table.

=== Creating tables

The simplest way to execute SQL is to call the `execute()` method passing the SQL you wish to execute as a String as shown here:

[source,groovy]
.Creating a table
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_creating_table,indent=0]
----

There is a variant of this method which takes a GString and another with a list of parameters. There are also other variants with similar names: `executeInsert` and `executeUpdate`.
We'll see examples of these variants in other examples in this section.

== Basic CRUD operations

The basic operations on a database are Create, Read, Update and Delete (the so-called CRUD operations). We'll examine each of these in turn.

=== Creating/Inserting data

You can use the same `execute()` statement we saw earlier but to insert a row by using a SQL insert statement as follows:

[source,groovy]
.Inserting a row
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_inserting_row,indent=0]
----

You can use a special `executeInsert` method instead of `execute`. This will return a list of all keys generated.
Both the `execute` and `executeInsert` methods allow you to place '?' placeholders into your SQL string and supply a list of parameters.
In this case a PreparedStatement is used which avoids any risk of SQL injection. The following example illustrates `executeInsert` using placeholders and parameters:

[source,groovy]
.Inserting a row using executeInsert with placeholders and parameters
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_inserting_row_executeInsert,indent=0]
----

In addition, both the `execute` and `executeInsert` methods allow you to use GStrings. Any '$' placeholders within the SQL are assumed
to be placeholders. An escaping mechanism exists if you want to supply part of the GString with a variable in a
position which isn't where normal placeholders go within SQL. See the GroovyDoc for more details.
Also, `executeInsert` allows you to supply a list of key column names, when multiple keys are returned and you are only interested in some of them.
 Here is a fragment illustrating key name specification and GStrings:

[source,groovy]
.Inserting a row using executeInsert with a GString and specifying key names
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_inserting_row_executeInsert_keys,indent=0]
----

=== Reading rows

Reading rows of data from the database is accomplished using one of several available methods: `query`, `eachRow`, `firstRow` and `rows`.

Use the `query` method if you want to iterate through the `ResultSet` returned by the underlying JDBC API as shown here:

[source,groovy]
.Reading data using `query`
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_reading_query,indent=0]
----

Use the `eachRow` method if you want a slightly higher-level abstraction which provides a Groovy friendly map-like abstraction for the `ResultSet` as shown here:

[source,groovy]
.Reading data using `eachRow`
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_reading_eachrow,indent=0]
----

Note that you can use Groovy list-style and map-style notations when accessing the row of data.

Use the `firstRow` method if you for similar functionality as `eachRow` but returning only one row of data as shown here:

[source,groovy]
.Reading data using `firstRow`
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_reading_firstrow,indent=0]
----

Use the `rows` method if you want to process a list of map-like data structures as shown here:

[source,groovy]
.Reading data using `rows`
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_reading_rows,indent=0]
----

Note that the map-like abstraction has case-insensitive keys (hence we can use 'FIRSTNAME' or 'firstname' as the key) and
also that -ve indices (a standard Groovy feature) works when using an index value (to count column numbers from the right).

You can also use any of the above methods to return scalar values, though typically `firstRow` is all that is required in such cases. An example returning the count of rows is shown here:

[source,groovy]
.Reading scalar values
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_reading_scalar,indent=0]
----

=== Updating rows

Updating rows can again be done using the `execute()` method. Just use a SQL update statement as the argument to the method.
You can insert an author with just a lastname and then update the row to also have a firstname as follows:

[source,groovy]
.Updating a row
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_updating_execute,indent=0]
----

There is also a special `executeUpdate` variant which returns the number of rows updated as a result of executing the SQL.
For example, you can change the lastname of an author as follows:

[source,groovy]
.Using executeUpdate
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_updating_execute_update,indent=0]
----

=== Deleting rows

The `execute` method is also used for deleting rows as this example shows:

[source,groovy]
.Deleting rows
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_deleting_data,indent=0]
----

== Advanced SQL operations

=== Working with transactions

The easiest way to perform database operations within a transaction is to include the database operation within a `withTransaction` closure as shown in the following example:

[source,groovy]
.A successful transaction
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_transaction_pass,indent=0]
----

Here the database starts empty and has two rows after successful completion of the operation. Outside the scope of the
transaction, the database is never seen as having just one row.

If something goes wrong, any earlier operations within the `withTransaction` block are rolled back.
We can see that in operation in the following example where we use database metadata (more details coming up shortly) to find the
maximum allowable size of the `firstname` column and then attempt to enter a firstname one larger than that maximum value as shown here:

[source,groovy]
.A failed transaction will cause a rollback
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_transaction_fail,indent=0]
----

Even though the first sql execute succeeds initially, it will be rolled back and the number of rows will remain the same.

=== Using batches

When dealing with large volumes of data, particularly when inserting such data, it can be more efficient to chunk the data into batches. This is done
using the `withBatch` statement as shown in the following example:

[source,groovy]
.Batching SQL statements
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_batch_statements,indent=0]
----

After executing these statements, there will be 7 new rows in the database. In fact, they will have been added in batches
even though you can't easily tell that after that fact. If you want to confirm what is going on under the covers, you can
add a little bit of extra logging into your program. Add the following lines before the `withBatch` statement:

[source,groovy]
.Logging additional SQL information
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_batch_import_for_logging,indent=0]
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_batch_logging,indent=0]
----

With this extra logging turned on, and the changes made as per the above comment for the logging.properties file, you should see
output such as:

[source]
.SQL logging output with batching enable
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_batch_results,indent=0]
----

We should also note, that any combination of SQL statements can be added to the batch. They don't all have to be
inserting a new row to the same table.

We noted earlier that to avoid SQL injection, we encourage you to use prepared statements, this is achieved using the
variants of methods which take GStrings or a list of extra parameters. Prepared statements can be used in combination
with batches as shown in the following example:

[source,groovy]
.Batching prepared statements
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_batch_prepared_statements,indent=0]
----

This provides a much safer option if the data could come from a user such as via a script or a web form. Of course, given
that a prepared statement is being used, you are limited to a batch of the same SQL operation (insert in our example)
to the one table.

=== Performing pagination

When presenting large tables of data to a user, it is often convenient to present information a page at
a time. Many of Groovy's SQL retrieval methods have extra parameters which can be used to select a particular
page of interest. The starting position and page size are specified as integers as shown in the following example
using `rows`:

[source,groovy]
.Retrieving pages of data
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_pagination,indent=0]
----

=== Fetching metadata

JDBC metadata can be retrieved in numerous ways. Perhaps the most basic approach is to extract the
metadata from any row as shown in the following example which examines the tablename, column names and column type names:

[source,groovy]
.Using row metadata
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_basic_rs_metadata,indent=0]
----

And another slight variant to the previous example, this time also looking at the column label:

[source,groovy]
.Also using row metadata
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_basic_rs_metadata2,indent=0]
----

Accessing metadata is quite common, so Groovy also provides variants to many of its methods that let you
supply a closure that will be called once with the row metadata in addition to the normal row closure
which is called for each row. The following example illustrates the two closure variant for `eachRow`:

[source,groovy]
.Using row and metadata closures
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_basic_rs_metadata3,indent=0]
----

Note that our SQL query will only return one row, so we could have equally used `firstRow` for the previous example.

Finally, JDBC also provides metadata per connection (not just for rows). You can also access such metadata from Groovy as shown in this example:

[source,groovy]
.Using connection metadata
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_basic_table_metadata,indent=0]
----

Consult the JavaDoc for your driver to find out what metadata information is available for you to access.

=== Named and named-ordinal parameters

Groovy supports some additional alternative placeholder syntax variants. The GString variants
are typically preferred over these alternatives but the alternatives are useful for Java integration
purposes and sometimes in templating scenarios where GStrings might already be in heavy use as part
of a template. The named parameter variants are much like the String plus list of parameter variants but
instead of having a list of `?` placeholders followed by a list of parameters, you have one or more
placeholders having the form `:propName` or `?.propName` and a single map, named arguments or a
domain object as the parameter. The map or domain object should have a property named `propName`
corresponding to each supplied placeholder.

Here is an example using the colon form:

[source,groovy]
.Named parameters (colon form)
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_named,indent=0]
----

And another example using the question mark form:

[source,groovy]
.Named parameters (question mark form)
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_named2,indent=0]
----

If the information you need to supply is spread across multiple maps or domain objects you can
use the question mark form with an additional ordinal index as shown here:

[source,groovy]
.Named-ordinal parameters
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_named_ordinal1,indent=0]
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_named_ordinal2,indent=0]
----

=== Stored procedures

The exact syntax for creating a stored procedure or function varies slightly between different databases.
For the HSQLDB database we are using, we can create a stored function which returns the initials of all authors in a table
as follows:

[source,groovy]
.Creating a stored function
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_create_stored_proc,indent=0]
----

We can use a SQL `CALL` statement to invoke the function using Groovy's normal SQL retrieval methods.
Here is an example using `eachRow`.

[source,groovy]
.Creating a stored procedure or function
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_use_stored_proc,indent=0]
----

Here is the code for creating another stored function, this one taking the lastname as a parameter:

[source,groovy]
.Creating a stored function with a parameter
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_create_stored_proc_param,indent=0]
----

We can use the placeholder syntax to specify where the parameter belongs and note the special placeholder position to indicate the result:

[source,groovy]
.Using a stored function with a parameter
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_use_stored_proc_param,indent=0]
----

Finally, here is a stored procedure with input and output parameters:

[source,groovy]
.Creating a stored procedure with input and output parameters
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_create_stored_proc_inout,indent=0]
----

To use the `CONCAT_NAME` stored procedure parameter, we make use of a special `call` method. Any input parameters are simply provided
as parameters to the method call. For output parameters, the resulting type must be specified as shown here:

[source,groovy]
.Using a stored procedure with input and output parameters
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_use_stored_proc_inout,indent=0]
----

[source,groovy]
.Creating a stored procedure with an input/output parameter
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_create_stored_fun_inout_parameter,indent=0]
----

[source,groovy]
.Using a stored procedure with an input/output parameter
----
include::{rootProjectDir}/subprojects/groovy-sql/src/spec/test/SqlTest.groovy[tags=sql_use_stored_fun_inout_parameter,indent=0]
----

== Using DataSets

(TBD)
