/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/* $Id: SeekableStream.java 1345683 2012-06-03 14:50:33Z gadams $ */

package org.apache.xmlgraphics.image.codec.util;

import java.io.DataInput;
import java.io.DataInputStream;
import java.io.EOFException;
import java.io.IOException;
import java.io.InputStream;

/**
 * An abstract subclass of <code>java.io.InputStream</code> that allows seeking
 * within the input, similar to the <code>RandomAccessFile</code> class.
 * Additionally, the <code>DataInput</code> interface is supported and extended
 * to include support for little-endian representations of fundamental data
 * types.
 *
 * <p> In addition to the familiar methods from <code>InputStream</code>, the
 * methods <code>getFilePointer()</code>, <code>seek()</code>, are defined as in
 * the <code>RandomAccessFile</code> class.  The <code>canSeekBackwards()</code>
 * method will return <code>true</code> if it is permissible to seek to a
 * position earlier in the stream than the current value of
 * <code>getFilePointer()</code>.  Some subclasses of
 * <code>SeekableStream</code> guarantee the ability to seek backwards while
 * others may not offer this feature in the interest of providing greater
 * efficiency for those users who do not require it.
 *
 * <p> The <code>DataInput</code> interface is supported as well.  This included
 * the <code>skipBytes()</code> and <code>readFully()</code> methods and a
 * variety of <code>read</code> methods for various data types.
 *
 * <p> Three classes are provided for the purpose of adapting a standard
 * <code>InputStream</code> to the <code>SeekableStream</code> interface.
 * <code>ForwardSeekableStream</code> does not allows seeking backwards, but is
 * inexpensive to use.  <code>FileCacheSeekableStream</code> maintains a copy of
 * all of the data read from the input in a temporary file; this file will be
 * discarded automatically when the <code>FileSeekableStream</code> is
 * finalized, or when the JVM exits normally.
 * <code>FileCacheSeekableStream</code> is intended to be reasonably efficient
 * apart from the unavoidable use of disk space.  In circumstances where the
 * creation of a temporary file is not possible,
 * <code>MemoryCacheSeekableStream</code> may be used.
 * <code>MemoryCacheSeekableStream</code> creates a potentially large in-memory
 * buffer to store the stream data and so should be avoided when possible.
 *
 * <p> The <code>FileSeekableStream</code> class wraps a <code>File</code> or
 * <code>RandomAccessFile</code>. It forwards requests to the real underlying
 * file.  It performs a limited amount of caching in order to avoid excessive
 * I/O costs.
 *
 * <p> The <code>SegmentedSeekableStream</code> class performs a different sort
 * of function.  It creates a <code>SeekableStream</code> from another
 * <code>SeekableStream</code> by selecting a series of portions or "segments".
 * Each segment starts at a specified location within the source
 * <code>SeekableStream</code> and extends for a specified number of bytes.  The
 * <code>StreamSegmentMapper</code> interface and <code>StreamSegment</code>
 * class may be used to compute the segment positions dynamically.
 *
 * <p> A convenience methods, <code>wrapInputStream</code> is provided to
 * construct a suitable <code>SeekableStream</code> instance whose data is
 * supplied by a given <code>InputStream</code>.  The caller, by means of the
 * <code>canSeekBackwards</code> parameter, determines whether support for
 * seeking backwards is required.
 *
 */
public abstract class SeekableStream extends InputStream implements DataInput {

    /**
     * Returns a <code>SeekableStream</code> that will read from a
     * given <code>InputStream</code>, optionally including support
     * for seeking backwards.  This is a convenience method that
     * avoids the need to instantiate specific subclasses of
     * <code>SeekableStream</code> depending on the current security
     * model.
     *
     * @param is An <code>InputStream</code>.
     * @param canSeekBackwards <code>true</code> if the ability to seek
     *        backwards in the output is required.
     * @return An instance of <code>SeekableStream</code>.
     */
    public static SeekableStream wrapInputStream(InputStream is,
                                                 boolean canSeekBackwards) {
        SeekableStream stream = null;

        if (canSeekBackwards) {
            try {
                stream = new FileCacheSeekableStream(is);
            } catch (Exception e) {
                stream = new MemoryCacheSeekableStream(is);
            }
        } else {
            stream = new ForwardSeekableStream(is);
        }
        return stream;
    }

    // Methods from InputStream

    /**
     * Reads the next byte of data from the input stream. The value byte is
     * returned as an <code>int</code> in the range <code>0</code> to
     * <code>255</code>. If no byte is available because the end of the stream
     * has been reached, the value <code>-1</code> is returned. This method
     * blocks until input data is available, the end of the stream is detected,
     * or an exception is thrown.
     *
     * <p> A subclass must provide an implementation of this method.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract int read() throws IOException;

    /**
     * Reads up to <code>len</code> bytes of data from the input stream into
     * an array of bytes.  An attempt is made to read as many as
     * <code>len</code> bytes, but a smaller number may be read, possibly
     * zero. The number of bytes actually read is returned as an integer.
     *
     * <p> This method blocks until input data is available, end of stream is
     * detected, or an exception is thrown.
     *
     * <p> If <code>b</code> is <code>null</code>, a
     * <code>NullPointerException</code> is thrown.
     *
     * <p> If <code>off</code> is negative, or <code>len</code> is negative, or
     * <code>off+len</code> is greater than the length of the array
     * <code>b</code>, then an <code>IndexOutOfBoundsException</code> is
     * thrown.
     *
     * <p> If <code>len</code> is zero, then no bytes are read and
     * <code>0</code> is returned; otherwise, there is an attempt to read at
     * least one byte. If no byte is available because the stream is at end of
     * stream, the value <code>-1</code> is returned; otherwise, at least one
     * byte is read and stored into <code>b</code>.
     *
     * <p> The first byte read is stored into element <code>b[off]</code>, the
     * next one into <code>b[off+1]</code>, and so on. The number of bytes read
     * is, at most, equal to <code>len</code>. Let <i>k</i> be the number of
     * bytes actually read; these bytes will be stored in elements
     * <code>b[off]</code> through <code>b[off+</code><i>k</i><code>-1]</code>,
     * leaving elements <code>b[off+</code><i>k</i><code>]</code> through
     * <code>b[off+len-1]</code> unaffected.
     *
     * <p> In every case, elements <code>b[0]</code> through
     * <code>b[off]</code> and elements <code>b[off+len]</code> through
     * <code>b[b.length-1]</code> are unaffected.
     *
     * <p> If the first byte cannot be read for any reason other than end of
     * stream, then an <code>IOException</code> is thrown. In particular, an
     * <code>IOException</code> is thrown if the input stream has been closed.
     *
     * <p> A subclass must provide an implementation of this method.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset in array <code>b</code>
     *                   at which the data is written.
     * @param      len   the maximum number of bytes to read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract int read(byte[] b, int off, int len) throws IOException;

    // Implemented in InputStream:
    //
    // public int read(byte[] b) throws IOException {
    // public long skip(long n) throws IOException
    // public int available) throws IOException
    // public void close() throws IOException;

    /** Marked position, shared by {@link ForwardSeekableStream} */
    protected long markPos = -1L;

    /**
     * Marks the current file position for later return using
     * the <code>reset()</code> method.
     */
    public synchronized void mark(int readLimit) {
        try {
            markPos = getFilePointer();
        } catch (IOException e) {
            markPos = -1L;
        }
    }

    /**
     * Returns the file position to its position at the time of
     * the immediately previous call to the <code>mark()</code>
     * method.
     */
    public synchronized void reset() throws IOException {
        if (markPos != -1) {
            seek(markPos);
        }
    }

    /**
     * Returns <code>true</code> if marking is supported.
     * Marking is automatically supported for <code>SeekableStream</code>
     * subclasses that support seeking backeards.  Subclasses that do
     * not support seeking backwards but do support marking must override
     * this method.
     */
    public boolean markSupported() {
        return canSeekBackwards();
    }

    /**
     * Returns <code>true</code> if this object supports calls to
     * <code>seek(pos)</code> with an offset <code>pos</code> smaller
     * than the current offset, as returned by <code>getFilePointer</code>.
     */
    public boolean canSeekBackwards() {
        return false;
    }

    /**
     * Returns the current offset in this stream.
     *
     * @return     the offset from the beginning of the stream, in bytes,
     *             at which the next read occurs.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract long getFilePointer() throws IOException;

    /**
     * Sets the offset, measured from the beginning of this
     * stream, at which the next read occurs.
     *
     * <p> If <code>canSeekBackwards()</code> returns <code>false</code>,
     * then setting <code>pos</code> to an offset smaller than
     * the current value of <code>getFilePointer()</code> will have
     * no effect.
     *
     * @param      pos   the offset position, measured in bytes from the
     *                   beginning of the stream, at which to set the stream
     *                   pointer.
     * @exception  IOException  if <code>pos</code> is less than
     *                          <code>0</code> or if an I/O error occurs.
     */
    public abstract void seek(long pos) throws IOException;

    // Methods from RandomAccessFile

    /**
     * Reads <code>b.length</code> bytes from this stream into the byte
     * array, starting at the current stream pointer. This method reads
     * repeatedly from the stream until the requested number of bytes are
     * read. This method blocks until the requested number of bytes are
     * read, the end of the stream is detected, or an exception is thrown.
     *
     * @param      b   the buffer into which the data is read.
     * @exception  EOFException  if this stream reaches the end before reading
     *               all the bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final void readFully(byte[] b) throws IOException {
        readFully(b, 0, b.length);
    }

    /**
     * Reads exactly <code>len</code> bytes from this stream into the byte
     * array, starting at the current stream pointer. This method reads
     * repeatedly from the stream until the requested number of bytes are
     * read. This method blocks until the requested number of bytes are
     * read, the end of the stream is detected, or an exception is thrown.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset of the data.
     * @param      len   the number of bytes to read.
     * @exception  EOFException  if this stream reaches the end before reading
     *               all the bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final void readFully(byte[] b, int off, int len)
        throws IOException {
        int n = 0;
        do {
            int count = this.read(b, off + n, len - n);
            if (count < 0) {
                throw new EOFException();
            }
            n += count;
        } while (n < len);
    }

    // Methods from DataInput, plus little-endian versions

    /**
     * Attempts to skip over <code>n</code> bytes of input discarding the
     * skipped bytes.
     * <p>
     *
     * This method may skip over some smaller number of bytes, possibly zero.
     * This may result from any of a number of conditions; reaching end of
     * stream before <code>n</code> bytes have been skipped is only one
     * possibility. This method never throws an <code>EOFException</code>.
     * The actual number of bytes skipped is returned.  If <code>n</code>
     * is negative, no bytes are skipped.
     *
     * @param      n   the number of bytes to be skipped.
     * @return     the actual number of bytes skipped.
     * @exception  IOException  if an I/O error occurs.
     */
    public int skipBytes(int n) throws IOException {
        if (n <= 0) {
            return 0;
        }
        return (int)skip(n);
    }

    /**
     * Reads a <code>boolean</code> from this stream. This method reads a
     * single byte from the stream, starting at the current stream pointer.
     * A value of <code>0</code> represents
     * <code>false</code>. Any other value represents <code>true</code>.
     * This method blocks until the byte is read, the end of the stream
     * is detected, or an exception is thrown.
     *
     * @return     the <code>boolean</code> value read.
     * @exception  EOFException  if this stream has reached the end.
     * @exception  IOException   if an I/O error occurs.
     */
    public final boolean readBoolean() throws IOException {
        int ch = this.read();
        if (ch < 0) {
            throw new EOFException();
        }
        return (ch != 0);
    }

    /**
     * Reads a signed eight-bit value from this stream. This method reads a
     * byte from the stream, starting from the current stream pointer.
     * If the byte read is <code>b</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b&nbsp;&lt;=&nbsp;255</code>,
     * then the result is:
     * <blockquote><pre>
     *     (byte)(b)
     * </pre></blockquote>
     * <p>
     * This method blocks until the byte is read, the end of the stream
     * is detected, or an exception is thrown.
     *
     * @return     the next byte of this stream as a signed eight-bit
     *             <code>byte</code>.
     * @exception  EOFException  if this stream has reached the end.
     * @exception  IOException   if an I/O error occurs.
     */
    public final byte readByte() throws IOException {
        int ch = this.read();
        if (ch < 0) {
            throw new EOFException();
        }
        return (byte)(ch);
    }

    /**
     * Reads an unsigned eight-bit number from this stream. This method reads
     * a byte from this stream, starting at the current stream pointer,
     * and returns that byte.
     * <p>
     * This method blocks until the byte is read, the end of the stream
     * is detected, or an exception is thrown.
     *
     * @return     the next byte of this stream, interpreted as an unsigned
     *             eight-bit number.
     * @exception  EOFException  if this stream has reached the end.
     * @exception  IOException   if an I/O error occurs.
     */
    public final int readUnsignedByte() throws IOException {
        int ch = this.read();
        if (ch < 0) {
            throw new EOFException();
        }
        return ch;
    }

    /**
     * Reads a signed 16-bit number from this stream.
     * The method reads two
     * bytes from this stream, starting at the current stream pointer.
     * If the two bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where each of the two values is
     * between <code>0</code> and <code>255</code>, inclusive, then the
     * result is equal to:
     * <blockquote><pre>
     *     (short)((b1 &lt;&lt; 8) | b2)
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream, interpreted as a signed
     *             16-bit number.
     * @exception  EOFException  if this stream reaches the end before reading
     *               two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final short readShort() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (short)((ch1 << 8) + (ch2 << 0));
    }

    /**
     * Reads a signed 16-bit number from this stream in little-endian order.
     * The method reads two
     * bytes from this stream, starting at the current stream pointer.
     * If the two bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where each of the two values is
     * between <code>0</code> and <code>255</code>, inclusive, then the
     * result is equal to:
     * <blockquote><pre>
     *     (short)((b2 &lt;&lt; 8) | b1)
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream, interpreted as a signed
     *             16-bit number.
     * @exception  EOFException  if this stream reaches the end before reading
     *               two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final short readShortLE() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (short)((ch2 << 8) + (ch1 << 0));
    }

    /**
     * Reads an unsigned 16-bit number from this stream. This method reads
     * two bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b1 &lt;&lt; 8) | b2
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream, interpreted as an
     *             unsigned 16-bit integer.
     * @exception  EOFException  if this stream reaches the end before reading
     *             two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final int readUnsignedShort() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (ch1 << 8) + (ch2 << 0);
    }

    /**
     * Reads an unsigned 16-bit number from this stream in little-endian order.
     * This method reads
     * two bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b2 &lt;&lt; 8) | b1
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream, interpreted as an
     *             unsigned 16-bit integer.
     * @exception  EOFException  if this stream reaches the end before reading
     *               two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final int readUnsignedShortLE() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (ch2 << 8) + (ch1 << 0);
    }

    /**
     * Reads a Unicode character from this stream. This method reads two
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1,&nbsp;b2&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (char)((b1 &lt;&lt; 8) | b2)
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream as a Unicode character.
     * @exception  EOFException  if this stream reaches the end before reading
     *               two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final char readChar() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (char)((ch1 << 8) + (ch2 << 0));
    }

    /**
     * Reads a Unicode character from this stream in little-endian order.
     * This method reads two
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code> and <code>b2</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1,&nbsp;b2&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (char)((b2 &lt;&lt; 8) | b1)
     * </pre></blockquote>
     * <p>
     * This method blocks until the two bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next two bytes of this stream as a Unicode character.
     * @exception  EOFException  if this stream reaches the end before reading
     *               two bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final char readCharLE() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        if ((ch1 | ch2) < 0) {
            throw new EOFException();
        }
        return (char)((ch2 << 8) + (ch1 << 0));
    }

    /**
     * Reads a signed 32-bit integer from this stream. This method reads 4
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are <code>b1</code>,
     * <code>b2</code>, <code>b3</code>, and <code>b4</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2, b3, b4&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b1 &lt;&lt; 24) | (b2 &lt;&lt; 16) + (b3 &lt;&lt; 8) + b4
     * </pre></blockquote>
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as an
     *             <code>int</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final int readInt() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        int ch3 = this.read();
        int ch4 = this.read();
        if ((ch1 | ch2 | ch3 | ch4) < 0) {
            throw new EOFException();
        }
        return ((ch1 << 24) + (ch2 << 16) + (ch3 << 8) + (ch4 << 0));
    }

    /**
     * Reads a signed 32-bit integer from this stream in little-endian order.
     * This method reads 4
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are <code>b1</code>,
     * <code>b2</code>, <code>b3</code>, and <code>b4</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2, b3, b4&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b4 &lt;&lt; 24) | (b3 &lt;&lt; 16) + (b2 &lt;&lt; 8) + b1
     * </pre></blockquote>
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as an
     *             <code>int</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final int readIntLE() throws IOException {
        int ch1 = this.read();
        int ch2 = this.read();
        int ch3 = this.read();
        int ch4 = this.read();
        if ((ch1 | ch2 | ch3 | ch4) < 0) {
            throw new EOFException();
        }
        return ((ch4 << 24) + (ch3 << 16) + (ch2 << 8) + (ch1 << 0));
    }

    /**
     * Reads an unsigned 32-bit integer from this stream. This method reads 4
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are <code>b1</code>,
     * <code>b2</code>, <code>b3</code>, and <code>b4</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2, b3, b4&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b1 &lt;&lt; 24) | (b2 &lt;&lt; 16) + (b3 &lt;&lt; 8) + b4
     * </pre></blockquote>
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as a
     *             <code>long</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final long readUnsignedInt() throws IOException {
        long ch1 = this.read();
        long ch2 = this.read();
        long ch3 = this.read();
        long ch4 = this.read();
        if ((ch1 | ch2 | ch3 | ch4) < 0) {
            throw new EOFException();
        }
        return ((ch1 << 24) + (ch2 << 16) + (ch3 << 8) + (ch4 << 0));
    }

    private byte[] ruileBuf = new byte[4];

    /**
     * Reads an unsigned 32-bit integer from this stream in little-endian
     * order.  This method reads 4
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are <code>b1</code>,
     * <code>b2</code>, <code>b3</code>, and <code>b4</code>, where
     * <code>0&nbsp;&lt;=&nbsp;b1, b2, b3, b4&nbsp;&lt;=&nbsp;255</code>,
     * then the result is equal to:
     * <blockquote><pre>
     *     (b4 &lt;&lt; 24) | (b3 &lt;&lt; 16) + (b2 &lt;&lt; 8) + b1
     * </pre></blockquote>
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as a
     *             <code>long</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final long readUnsignedIntLE() throws IOException {
        this.readFully(ruileBuf);
        long ch1 = (ruileBuf[0] & 0xff);
        long ch2 = (ruileBuf[1] & 0xff);
        long ch3 = (ruileBuf[2] & 0xff);
        long ch4 = (ruileBuf[3] & 0xff);

        return ((ch4 << 24) + (ch3 << 16) + (ch2 << 8) + (ch1 << 0));
    }

    /**
     * Reads a signed 64-bit integer from this stream. This method reads eight
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code>, <code>b2</code>, <code>b3</code>,
     * <code>b4</code>, <code>b5</code>, <code>b6</code>,
     * <code>b7</code>, and <code>b8,</code> where:
     * <blockquote><pre>
     *     0 &lt;= b1, b2, b3, b4, b5, b6, b7, b8 &lt;=255,
     * </pre></blockquote>
     * <p>
     * then the result is equal to:
     * <p><blockquote><pre>
     *     ((long)b1 &lt;&lt; 56) + ((long)b2 &lt;&lt; 48)
     *     + ((long)b3 &lt;&lt; 40) + ((long)b4 &lt;&lt; 32)
     *     + ((long)b5 &lt;&lt; 24) + ((long)b6 &lt;&lt; 16)
     *     + ((long)b7 &lt;&lt; 8) + b8
     * </pre></blockquote>
     * <p>
     * This method blocks until the eight bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next eight bytes of this stream, interpreted as a
     *             <code>long</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               eight bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final long readLong() throws IOException {
        return ((long)(readInt()) << 32) + (readInt() & 0xFFFFFFFFL);
    }

    /**
     * Reads a signed 64-bit integer from this stream in little-endian
     * order. This method reads eight
     * bytes from the stream, starting at the current stream pointer.
     * If the bytes read, in order, are
     * <code>b1</code>, <code>b2</code>, <code>b3</code>,
     * <code>b4</code>, <code>b5</code>, <code>b6</code>,
     * <code>b7</code>, and <code>b8,</code> where:
     * <blockquote><pre>
     *     0 &lt;= b1, b2, b3, b4, b5, b6, b7, b8 &lt;=255,
     * </pre></blockquote>
     * <p>
     * then the result is equal to:
     * <p><blockquote><pre>
     *     ((long)b1 &lt;&lt; 56) + ((long)b2 &lt;&lt; 48)
     *     + ((long)b3 &lt;&lt; 40) + ((long)b4 &lt;&lt; 32)
     *     + ((long)b5 &lt;&lt; 24) + ((long)b6 &lt;&lt; 16)
     *     + ((long)b7 &lt;&lt; 8) + b8
     * </pre></blockquote>
     * <p>
     * This method blocks until the eight bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next eight bytes of this stream, interpreted as a
     *             <code>long</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *               eight bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final long readLongLE() throws IOException {
        int i1 = readIntLE();
        int i2 = readIntLE();
        return ((long)i2 << 32) + (i1 & 0xFFFFFFFFL);
    }

    /**
     * Reads a <code>float</code> from this stream. This method reads an
     * <code>int</code> value, starting at the current stream pointer,
     * as if by the <code>readInt</code> method
     * and then converts that <code>int</code> to a <code>float</code>
     * using the <code>intBitsToFloat</code> method in class
     * <code>Float</code>.
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as a
     *             <code>float</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *             four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final float readFloat() throws IOException {
        return Float.intBitsToFloat(readInt());
    }

    /**
     * Reads a <code>float</code> from this stream in little-endian order.
     * This method reads an
     * <code>int</code> value, starting at the current stream pointer,
     * as if by the <code>readInt</code> method
     * and then converts that <code>int</code> to a <code>float</code>
     * using the <code>intBitsToFloat</code> method in class
     * <code>Float</code>.
     * <p>
     * This method blocks until the four bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next four bytes of this stream, interpreted as a
     *             <code>float</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *             four bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final float readFloatLE() throws IOException {
        return Float.intBitsToFloat(readIntLE());
    }

    /**
     * Reads a <code>double</code> from this stream. This method reads a
     * <code>long</code> value, starting at the current stream pointer,
     * as if by the <code>readLong</code> method
     * and then converts that <code>long</code> to a <code>double</code>
     * using the <code>longBitsToDouble</code> method in
     * class <code>Double</code>.
     * <p>
     * This method blocks until the eight bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next eight bytes of this stream, interpreted as a
     *             <code>double</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *             eight bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final double readDouble() throws IOException {
        return Double.longBitsToDouble(readLong());
    }

    /**
     * Reads a <code>double</code> from this stream in little-endian order.
     * This method reads a
     * <code>long</code> value, starting at the current stream pointer,
     * as if by the <code>readLong</code> method
     * and then converts that <code>long</code> to a <code>double</code>
     * using the <code>longBitsToDouble</code> method in
     * class <code>Double</code>.
     * <p>
     * This method blocks until the eight bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     the next eight bytes of this stream, interpreted as a
     *             <code>double</code>.
     * @exception  EOFException  if this stream reaches the end before reading
     *             eight bytes.
     * @exception  IOException   if an I/O error occurs.
     */
    public final double readDoubleLE() throws IOException {
        return Double.longBitsToDouble(readLongLE());
    }

    /**
     * Reads the next line of text from this stream.  This method successively
     * reads bytes from the stream, starting at the current stream pointer,
     * until it reaches a line terminator or the end
     * of the stream.  Each byte is converted into a character by taking the
     * byte's value for the lower eight bits of the character and setting the
     * high eight bits of the character to zero.  This method does not,
     * therefore, support the full Unicode character set.
     *
     * <p> A line of text is terminated by a carriage-return character
     * (<code>'&#92;r'</code>), a newline character (<code>'&#92;n'</code>), a
     * carriage-return character immediately followed by a newline character,
     * or the end of the stream.  Line-terminating characters are discarded and
     * are not included as part of the string returned.
     *
     * <p> This method blocks until a newline character is read, a carriage
     * return and the byte following it are read (to see if it is a newline),
     * the end of the stream is reached, or an exception is thrown.
     *
     * @return     the next line of text from this stream, or null if end
     *             of stream is encountered before even one byte is read.
     * @exception  IOException  if an I/O error occurs.
     */
    public final String readLine() throws IOException {
        StringBuffer input = new StringBuffer();
        int c = -1;
        boolean eol = false;

        while (!eol) {
            c = read();
            switch (c) {
            case -1:
            case '\n':
                eol = true;
                break;
            case '\r':
                eol = true;
                long cur = getFilePointer();
                if ((read()) != '\n') {
                    seek(cur);
                }
                break;
            default:
                input.append((char)c);
                break;
            }
        }

        if ((c == -1) && (input.length() == 0)) {
            return null;
        }
        return input.toString();
    }

    /**
     * Reads in a string from this stream. The string has been encoded
     * using a modified UTF-8 format.
     * <p>
     * The first two bytes are read, starting from the current stream
     * pointer, as if by
     * <code>readUnsignedShort</code>. This value gives the number of
     * following bytes that are in the encoded string, not
     * the length of the resulting string. The following bytes are then
     * interpreted as bytes encoding characters in the UTF-8 format
     * and are converted into characters.
     * <p>
     * This method blocks until all the bytes are read, the end of the
     * stream is detected, or an exception is thrown.
     *
     * @return     a Unicode string.
     * @exception  EOFException            if this stream reaches the end before
     *               reading all the bytes.
     * @exception  IOException             if an I/O error occurs.
     * @exception  java.io.UTFDataFormatException  if the bytes do not represent
     *               valid UTF-8 encoding of a Unicode string.
     */
    public final String readUTF() throws IOException {
        return DataInputStream.readUTF(this);
    }

    /**
     * Releases any system resources associated with this stream
     * by calling the <code>close()</code> method.
     */
    protected void finalize() throws Throwable {
        super.finalize();
        close();
    }
}
