Last updated on 2026-08-01 03:52:25 CEST.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 0.4.2 | 10.39 | 113.70 | 124.09 | OK | |
| r-devel-linux-x86_64-debian-gcc | 0.4.2 | 8.27 | 84.28 | 92.55 | NOTE | |
| r-devel-linux-x86_64-fedora-clang | 0.4.2 | 18.00 | 153.66 | 171.66 | OK | |
| r-devel-linux-x86_64-fedora-gcc | 0.4.2 | 8.00 | 72.85 | 80.85 | OK | |
| r-devel-windows-x86_64 | 0.4.2 | 12.00 | 103.00 | 115.00 | ERROR | |
| r-patched-linux-x86_64 | 0.4.2 | 8.14 | 105.50 | 113.64 | OK | |
| r-release-linux-x86_64 | 0.4.2 | 9.59 | 119.33 | 128.92 | OK | |
| r-release-macos-arm64 | 0.4.2 | 3.00 | 33.00 | 36.00 | OK | |
| r-release-macos-x86_64 | 0.4.2 | 8.00 | 147.00 | 155.00 | OK | |
| r-release-windows-x86_64 | 0.4.2 | 12.00 | 101.00 | 113.00 | ERROR | |
| r-oldrel-macos-arm64 | 0.4.2 | 3.00 | 32.00 | 35.00 | OK | |
| r-oldrel-macos-x86_64 | 0.4.2 | 8.00 | 137.00 | 145.00 | OK | |
| r-oldrel-windows-x86_64 | 0.4.2 | 18.00 | 142.00 | 160.00 | ERROR |
Version: 0.4.2
Check: for new files in some other directories
Result: NOTE
Found the following files/directories:
‘~/tmp/scratch/Rtmp0ESKx8’ ‘~/tmp/scratch/Rtmp0fxr4W’
‘~/tmp/scratch/Rtmp0l2wGV’ ‘~/tmp/scratch/Rtmp0uoidp’
‘~/tmp/scratch/Rtmp1TDC6n’ ‘~/tmp/scratch/Rtmp2JAzbd’
‘~/tmp/scratch/Rtmp2ealPG’ ‘~/tmp/scratch/Rtmp3btJsB’
‘~/tmp/scratch/Rtmp3xULtf’ ‘~/tmp/scratch/Rtmp4XTLPW’
‘~/tmp/scratch/Rtmp4bnuJa’ ‘~/tmp/scratch/Rtmp4o0gqc’
‘~/tmp/scratch/Rtmp5LIcIh’ ‘~/tmp/scratch/Rtmp5VvbL9’
‘~/tmp/scratch/Rtmp6k29uI’ ‘~/tmp/scratch/Rtmp717xUa’
‘~/tmp/scratch/Rtmp7NHyfc’ ‘~/tmp/scratch/Rtmp86lpVk’
‘~/tmp/scratch/Rtmp8h26DT’ ‘~/tmp/scratch/Rtmp90556T’
‘~/tmp/scratch/Rtmp98GxvO’ ‘~/tmp/scratch/Rtmp9ZKMuY’
‘~/tmp/scratch/RtmpBz3rwo’ ‘~/tmp/scratch/RtmpC9NNCL’
‘~/tmp/scratch/RtmpCJLt5P’ ‘~/tmp/scratch/RtmpDP1hWT’
‘~/tmp/scratch/RtmpE62XLP’ ‘~/tmp/scratch/RtmpEpaObF’
‘~/tmp/scratch/RtmpEuMiiZ’ ‘~/tmp/scratch/RtmpFGrikO’
‘~/tmp/scratch/RtmpGlm5gA’ ‘~/tmp/scratch/RtmpHdgspj’
‘~/tmp/scratch/RtmpI1QbdB’ ‘~/tmp/scratch/RtmpI7FgoD’
‘~/tmp/scratch/RtmpIZbfea’ ‘~/tmp/scratch/RtmpIbpGHl’
‘~/tmp/scratch/RtmpIfbddm’ ‘~/tmp/scratch/RtmpJwvB5G’
‘~/tmp/scratch/RtmpK7GxNA’ ‘~/tmp/scratch/RtmpK8w5rv’
‘~/tmp/scratch/RtmpKABbeG’ ‘~/tmp/scratch/RtmpKAfyT0’
‘~/tmp/scratch/RtmpLU1KcI’ ‘~/tmp/scratch/RtmpMRf5L9’
‘~/tmp/scratch/RtmpMVzDsI’ ‘~/tmp/scratch/RtmpMs6hhu’
‘~/tmp/scratch/RtmpNHzpeh’ ‘~/tmp/scratch/RtmpNclWKo’
‘~/tmp/scratch/RtmpOJFKAV’ ‘~/tmp/scratch/RtmpOo965L’
‘~/tmp/scratch/RtmpOxvcqX’ ‘~/tmp/scratch/RtmpQXp212’
‘~/tmp/scratch/RtmpQbAKyE’ ‘~/tmp/scratch/RtmpQhPffv’
‘~/tmp/scratch/RtmpQnn1kr’ ‘~/tmp/scratch/RtmpQok5z7’
‘~/tmp/scratch/RtmpRtAuGJ’ ‘~/tmp/scratch/RtmpRvAyiK’
‘~/tmp/scratch/RtmpShnaFw’ ‘~/tmp/scratch/RtmpSt6rZH’
‘~/tmp/scratch/RtmpTIvjUN’ ‘~/tmp/scratch/RtmpTo2WPW’
‘~/tmp/scratch/RtmpUBXU6K’ ‘~/tmp/scratch/RtmpUHGvz2’
‘~/tmp/scratch/RtmpUndQ70’ ‘~/tmp/scratch/RtmpV8LTap’
‘~/tmp/scratch/RtmpVSf9UP’ ‘~/tmp/scratch/RtmpW9bsBv’
‘~/tmp/scratch/RtmpWBMULV’ ‘~/tmp/scratch/RtmpX1GkgI’
‘~/tmp/scratch/RtmpXED4lM’ ‘~/tmp/scratch/RtmpXEoSO8’
‘~/tmp/scratch/RtmpYPMgn9’ ‘~/tmp/scratch/RtmpYtfW9I’
‘~/tmp/scratch/RtmpZBVjdq’ ‘~/tmp/scratch/RtmpZuDOPd’
‘~/tmp/scratch/RtmpaAeVZR’ ‘~/tmp/scratch/Rtmpah4BtY’
‘~/tmp/scratch/Rtmpavcig2’ ‘~/tmp/scratch/RtmpbZdm1t’
‘~/tmp/scratch/Rtmpbc2zm6’ ‘~/tmp/scratch/RtmpcFgAlQ’
‘~/tmp/scratch/RtmpdHYHh9’ ‘~/tmp/scratch/Rtmpe0H19B’
‘~/tmp/scratch/RtmpeFhohQ’ ‘~/tmp/scratch/RtmpeMiHcb’
‘~/tmp/scratch/Rtmpfel0D3’ ‘~/tmp/scratch/RtmpgoN5I1’
‘~/tmp/scratch/RtmphISNIM’ ‘~/tmp/scratch/RtmphmSdBV’
‘~/tmp/scratch/RtmpiBCH86’ ‘~/tmp/scratch/RtmpiCXHq5’
‘~/tmp/scratch/RtmpiMWkX8’ ‘~/tmp/scratch/Rtmpj9gQYK’
‘~/tmp/scratch/Rtmpja6kW6’ ‘~/tmp/scratch/RtmpjnLeyu’
‘~/tmp/scratch/RtmpkB95gR’ ‘~/tmp/scratch/RtmpkZJ1VG’
‘~/tmp/scratch/Rtmpkfc7A9’ ‘~/tmp/scratch/RtmpkydB2G’
‘~/tmp/scratch/Rtmpl31M7Y’ ‘~/tmp/scratch/RtmplPcRz3’
‘~/tmp/scratch/RtmplRomfW’ ‘~/tmp/scratch/RtmplTuR2F’
‘~/tmp/scratch/RtmplU6E9e’ ‘~/tmp/scratch/Rtmpm0OteH’
‘~/tmp/scratch/RtmpmOo5l8’ ‘~/tmp/scratch/Rtmpn2QZg7’
‘~/tmp/scratch/RtmpnhrGYT’ ‘~/tmp/scratch/RtmppYjsRC’
‘~/tmp/scratch/RtmppvO9vn’ ‘~/tmp/scratch/Rtmpr0IbxJ’
‘~/tmp/scratch/Rtmpr4CUXO’ ‘~/tmp/scratch/RtmprOOKfV’
‘~/tmp/scratch/RtmprqVb98’ ‘~/tmp/scratch/RtmpsH8ffk’
‘~/tmp/scratch/RtmpscUKDV’ ‘~/tmp/scratch/Rtmpt9LW8S’
‘~/tmp/scratch/RtmptQzLTV’ ‘~/tmp/scratch/RtmptaENGJ’
‘~/tmp/scratch/RtmpuNcrl9’ ‘~/tmp/scratch/RtmpuV4GJq’
‘~/tmp/scratch/RtmpubT2T4’ ‘~/tmp/scratch/Rtmpuhgezq’
‘~/tmp/scratch/RtmpvAMT3W’ ‘~/tmp/scratch/RtmpvCTMcI’
‘~/tmp/scratch/RtmpvgTHS7’ ‘~/tmp/scratch/Rtmpw1XvAy’
‘~/tmp/scratch/Rtmpw4LspW’ ‘~/tmp/scratch/RtmpwaCvz8’
‘~/tmp/scratch/Rtmpx7Oih5’ ‘~/tmp/scratch/RtmpxHWxke’
‘~/tmp/scratch/Rtmpyd3fsP’ ‘~/tmp/scratch/Rtmpz5EjUu’
‘~/tmp/scratch/RtmpzGg9z6’ ‘~/tmp/scratch/RtmpzNSZf2’
‘~/tmp/scratch/RtmpzkF1Pi’ ‘~/tmp/scratch/ccMWuFLm.s’
‘~/tmp/scratch/xvfb-run.18fXaZ’ ‘~/tmp/scratch/xvfb-run.1EWt5P’
‘~/tmp/scratch/xvfb-run.2F69j1’ ‘~/tmp/scratch/xvfb-run.43ySXg’
‘~/tmp/scratch/xvfb-run.4u8oea’ ‘~/tmp/scratch/xvfb-run.527YS5’
‘~/tmp/scratch/xvfb-run.56YJQ8’ ‘~/tmp/scratch/xvfb-run.5wgJ0C’
‘~/tmp/scratch/xvfb-run.6JBNz5’ ‘~/tmp/scratch/xvfb-run.6elfWi’
‘~/tmp/scratch/xvfb-run.7kojDQ’ ‘~/tmp/scratch/xvfb-run.8RdW1b’
‘~/tmp/scratch/xvfb-run.9DPVwZ’ ‘~/tmp/scratch/xvfb-run.AIeMgQ’
‘~/tmp/scratch/xvfb-run.Bqxl3Z’ ‘~/tmp/scratch/xvfb-run.F0G31w’
‘~/tmp/scratch/xvfb-run.FCVqn9’ ‘~/tmp/scratch/xvfb-run.GXWJjG’
‘~/tmp/scratch/xvfb-run.GiBh7W’ ‘~/tmp/scratch/xvfb-run.GpTbqK’
‘~/tmp/scratch/xvfb-run.GrDItM’ ‘~/tmp/scratch/xvfb-run.JqNMdu’
‘~/tmp/scratch/xvfb-run.Kk6lOM’ ‘~/tmp/scratch/xvfb-run.MJGHAx’
‘~/tmp/scratch/xvfb-run.P986m9’ ‘~/tmp/scratch/xvfb-run.PdfDKZ’
‘~/tmp/scratch/xvfb-run.S5z8IU’ ‘~/tmp/scratch/xvfb-run.SHpBIi’
‘~/tmp/scratch/xvfb-run.TA2uoA’ ‘~/tmp/scratch/xvfb-run.VXXueI’
‘~/tmp/scratch/xvfb-run.W7LSwn’ ‘~/tmp/scratch/xvfb-run.WXvuuv’
‘~/tmp/scratch/xvfb-run.XMN85F’ ‘~/tmp/scratch/xvfb-run.ZIVI4k’
‘~/tmp/scratch/xvfb-run.a9SV7m’ ‘~/tmp/scratch/xvfb-run.aHXIL1’
‘~/tmp/scratch/xvfb-run.aSihoi’ ‘~/tmp/scratch/xvfb-run.cTDoKw’
‘~/tmp/scratch/xvfb-run.fL3UjS’ ‘~/tmp/scratch/xvfb-run.h4x42W’
‘~/tmp/scratch/xvfb-run.j4qfWU’ ‘~/tmp/scratch/xvfb-run.jAsntv’
‘~/tmp/scratch/xvfb-run.jchDsB’ ‘~/tmp/scratch/xvfb-run.kKcJaN’
‘~/tmp/scratch/xvfb-run.kVt9dW’ ‘~/tmp/scratch/xvfb-run.lVIXt1’
‘~/tmp/scratch/xvfb-run.ltEs9M’ ‘~/tmp/scratch/xvfb-run.mReqA0’
‘~/tmp/scratch/xvfb-run.mbMzqy’ ‘~/tmp/scratch/xvfb-run.oviFIF’
‘~/tmp/scratch/xvfb-run.p9He10’ ‘~/tmp/scratch/xvfb-run.q3CNGo’
‘~/tmp/scratch/xvfb-run.s4T0iv’ ‘~/tmp/scratch/xvfb-run.yHebsR’
‘~/tmp/scratch/xvfb-run.yJajw5’
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [17s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-devel-windows-x86_64
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [16s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-release-windows-x86_64
Version: 0.4.2
Check: tests
Result: ERROR
Running 'testthat.R' [23s]
Running the tests in 'tests/testthat.R' failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(xpose.nlmixr2)
Loading required package: xpose
Loading required package: ggplot2
Attaching package: 'xpose'
The following object is masked from 'package:stats':
filter
>
> test_check("xpose.nlmixr2")
i parameter labels from comments will be replaced by 'label()'
> loading into symengine environment...
> pruning branches (`if`/`else`) of full model...
v done
> calculate d(f)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> calculate d(R^2)/d(eta)
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in inner model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> finding duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> optimizing duplicate expressions in EBE model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling inner model...
v done
> finding duplicate expressions in FD model...
[====|====|====|====|====|====|====|====|====|====] 0:00:00
> compiling EBE model...
v done
> compiling events FD model...
v done
rxode2 5.1.5 using 2 threads (see ?getRxThreads)
no cache: create with `rxCreateCache()`
Flavor: r-oldrel-windows-x86_64