<?xml version="1.0" encoding="UTF-8"?>
<!--
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
-->
<!DOCTYPE document [
  <!ENTITY project SYSTEM "project.xml">
]>
<document url="valve.html">

  &project;

  <properties>
    <author email="craigmcc@apache.org">Craig R. McClanahan</author>
    <title>The Valve Component</title>
  </properties>

<body>

<section name="Table of Contents">
<toc/>
</section>

<section name="Introduction">

  <p>A <strong>Valve</strong> element represents a component that will be
  inserted into the request processing pipeline for the associated
  Catalina container (<a href="engine.html">Engine</a>,
  <a href="host.html">Host</a>, or <a href="context.html">Context</a>).
  Individual Valves have distinct processing capabilities, and are
  described individually below.</p>

    <p><em>The description below uses the variable name $CATALINA_BASE to refer the
    base directory against which most relative paths are resolved. If you have
    not configured Tomcat for multiple instances by setting a CATALINA_BASE
    directory, then $CATALINA_BASE will be set to the value of $CATALINA_HOME,
    the directory into which you have installed Tomcat.</em></p>

</section>


<section name="Access Logging">

<p>Access logging is performed by valves that implement
<strong>org.apache.catalina.AccessLog</strong> interface.</p>

<subsection name="Access Log Valve">

  <subsection name="Introduction">

    <p>The <strong>Access Log Valve</strong> creates log files in the
    same format as those created by standard web servers.  These logs
    can later be analyzed by standard log analysis tools to track page
    hit counts, user session activity, and so on.  This <code>Valve</code>
    uses self-contained logic to write its log files, which can be
    automatically rolled over at midnight each day.  (The essential
    requirement for access logging is to handle a large continuous
    stream of data with low overhead. This <code>Valve</code> does not
    use Apache Commons Logging, thus avoiding additional overhead and
    potentially complex configuration).</p>

    <p>This <code>Valve</code> may be associated with any Catalina container
    (<code>Context</code>, <code>Host</code>, or <code>Engine</code>), and
    will record ALL requests processed by that container.</p>

    <p>Some requests may be handled by Tomcat before they are passed to a
    container. These include redirects from /foo to /foo/ and the rejection of
    invalid requests. Where Tomcat can identify the <code>Context</code> that
    would have handled the request, the request/response will be logged in the
    <code>AccessLog</code>(s) associated <code>Context</code>, <code>Host</code>
    and <code>Engine</code>. Where Tomcat cannot identify the
    <code>Context</code> that would have handled the request, e.g. in cases
    where the URL is invalid, Tomcat will look first in the <code>Engine</code>,
    then the default <code>Host</code> for the <code>Engine</code> and finally
    the ROOT (or default) <code>Context</code> for the default <code>Host</code>
    for an <code>AccessLog</code> implementation. Tomcat will use the first
    <code>AccessLog</code> implementation found to log those requests that are
    rejected before they are passed to a container.</p>

    <p>The output file will be placed in the directory given by the
    <code>directory</code> attribute. The name of the file is composed
    by concatenation of the configured <code>prefix</code>, timestamp and
    <code>suffix</code>. The format of the timestamp in the file name can be
    set using the <code>fileDateFormat</code> attribute. This timestamp will
    be omitted if the file rotation is switched off by setting
    <code>rotatable</code> to <code>false</code>.</p>

    <p><strong>Warning:</strong> If multiple AccessLogValve instances
    are used, they should be configured to use different output files.</p>

    <p>If sendfile is used, the response bytes will be written asynchronously
    in a separate thread and the access log valve will not know how many bytes
    were actually written. In this case, the number of bytes that was passed to
    the sendfile thread for writing will be recorded in the access log valve.
    </p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Access Log Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="buffered" required="false">
        <p>Flag to determine if logging will be buffered.
           If set to <code>false</code>, then access logging will be written after each
           request. Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.AccessLogValve</strong> to use the
        default access log valve.</p>
      </attribute>

      <attribute name="condition" required="false">
        <p>The same as <code>conditionUnless</code>. This attribute is
           provided for backwards compatibility.
        </p>
      </attribute>

      <attribute name="conditionIf" required="false">
        <p>Turns on conditional logging. If set, requests will be
           logged only if <code>ServletRequest.getAttribute()</code> is
           not null. For example, if this value is set to
           <code>important</code>, then a particular request will only be logged
           if <code>ServletRequest.getAttribute("important") != null</code>.
           The use of Filters is an easy way to set/unset the attribute
           in the ServletRequest on many different requests.
        </p>
      </attribute>

      <attribute name="conditionUnless" required="false">
        <p>Turns on conditional logging. If set, requests will be
           logged only if <code>ServletRequest.getAttribute()</code> is
           null. For example, if this value is set to
           <code>junk</code>, then a particular request will only be logged
           if <code>ServletRequest.getAttribute("junk") == null</code>.
           The use of Filters is an easy way to set/unset the attribute
           in the ServletRequest on many different requests.
        </p>
      </attribute>

      <attribute name="directory" required="false">
        <p>Absolute or relative pathname of a directory in which log files
        created by this valve will be placed.  If a relative path is
        specified, it is interpreted as relative to $CATALINA_BASE.  If
        no directory attribute is specified, the default value is "logs"
        (relative to $CATALINA_BASE).</p>
      </attribute>

      <attribute name="encoding" required="false">
        <p>Character set used to write the log file. An empty string means
        to use the default character set. Default value: UTF-8.
        </p>
      </attribute>

      <attribute name="fileDateFormat" required="false">
        <p>Allows a customized timestamp in the access log file name.
           The file is rotated whenever the formatted timestamp changes.
           The default value is <code>.yyyy-MM-dd</code>.
           If you wish to rotate every hour, then set this value
           to <code>.yyyy-MM-dd.HH</code>.
           The date format will always be localized
           using the locale <code>en_US</code>.
        </p>
      </attribute>

      <attribute name="ipv6Canonical" required="false">
        <p>Flag to determine if IPv6 addresses should be represented in canonical
           representation format as defined by RFC 5952. If set to <code>true</code>,
           then IPv6 addresses will be written in canonical format (e.g.
           <code>2001:db8::1:0:0:1</code>, <code>::1</code>), otherwise it will be
           represented in full form (e.g. <code>2001:db8:0:0:1:0:0:1</code>,
           <code>0:0:0:0:0:0:0:1</code>). Default value: <code>false</code>
        </p>
      </attribute>

      <attribute name="locale" required="false">
        <p>The locale used to format timestamps in the access log
           lines. Any timestamps configured using an
           explicit SimpleDateFormat pattern (<code>%{xxx}t</code>)
           are formatted in this locale. By default the
           default locale of the Java process is used. Switching the
           locale after the AccessLogValve is initialized is not supported.
           Any timestamps using the common log format
           (<code>CLF</code>) are always formatted in the locale
           <code>en_US</code>.
        </p>
      </attribute>

      <attribute name="maxDays" required="false">
        <p>The maximum number of days rotated access logs will be retained for
           before being deleted. If not specified, the default value of
           <code>-1</code> will be used which means never delete old files.</p>
      </attribute>

      <attribute name="maxLogMessageBufferSize" required="false">
        <p>Log message buffers are usually recycled and re-used. To prevent
           excessive memory usage, if a buffer grows beyond this size it will be
           discarded. The default is <code>256</code> characters. This should be
           set to larger than the typical access log message size.</p>
      </attribute>

      <attribute name="pattern" required="false">
        <p>A formatting layout identifying the various information fields
        from the request and response to be logged, or the word
        <code>common</code> or <code>combined</code> to select a
        standard format.  See below for more information on configuring
        this attribute.</p>
      </attribute>

      <attribute name="prefix" required="false">
        <p>The prefix added to the start of each log file's name.  If not
        specified, the default value is "access_log".</p>
      </attribute>

      <attribute name="renameOnRotate" required="false">
        <p>By default for a rotatable log the active access log file name
           will contain the current timestamp in <code>fileDateFormat</code>.
           During rotation the file is closed and a new file with the next
           timestamp in the name is created and used. When setting
           <code>renameOnRotate</code> to <code>true</code>, the timestamp
           is no longer part of the active log file name. Only during rotation
           the file is closed and then renamed to include the timestamp.
           This is similar to the behavior of most log frameworks when
           doing time based rotation.
           Default value: <code>false</code>
        </p>
      </attribute>

      <attribute name="requestAttributesEnabled" required="false">
        <p>Set to <code>true</code> to check for the existence of request
        attributes (typically set by the RemoteIpValve and similar) that should
        be used to override the values returned by the request for remote
        address, remote host, server port and protocol. If the attributes are
        not set, or this attribute is set to <code>false</code> then the values
        from the request will be used. If not set, the default value of
        <code>false</code> will be used.</p>
      </attribute>

      <attribute name="resolveHosts" required="false">
        <p>This attribute is no longer supported. Use the connector
        attribute <code>enableLookups</code> instead.</p>
        <p>If you have <code>enableLookups</code> on the connector set to
        <code>true</code> and want to ignore it, use <b>%a</b> instead of
        <b>%h</b> in the value of <code>pattern</code>.</p>
      </attribute>

      <attribute name="rotatable" required="false">
        <p>Flag to determine if log rotation should occur.
           If set to <code>false</code>, then this file is never rotated and
           <code>fileDateFormat</code> is ignored.
           Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="suffix" required="false">
        <p>The suffix added to the end of each log file's name.  If not
        specified, the default value is "" (a zero-length string),
        meaning that no suffix will be added.</p>
      </attribute>

    </attributes>

    <p>Values for the <code>pattern</code> attribute are made up of literal
    text strings, combined with pattern identifiers prefixed by the "%"
    character to cause replacement by the corresponding variable value from
    the current request and response.  The following pattern codes are
    supported:</p>
    <ul>
    <li><b><code>%a</code></b> - Remote IP address.
        See also <code>%{xxx}a</code> below.</li>
    <li><b><code>%A</code></b> - Local IP address</li>
    <li><b><code>%b</code></b> - Bytes sent, excluding HTTP headers, or '-' if zero</li>
    <li><b><code>%B</code></b> - Bytes sent, excluding HTTP headers</li>
    <li><b><code>%D</code></b> - Time taken to process the request in microseconds</li>
    <li><b><code>%F</code></b> - Time taken to commit the response, in milliseconds</li>
    <li><b><code>%h</code></b> - Remote host name (or IP address if
        <code>enableLookups</code> for the connector is false)</li>
    <li><b><code>%H</code></b> - Request protocol</li>
    <li><b><code>%I</code></b> - Current request thread name (can compare later with stacktraces)</li>
    <li><b><code>%l</code></b> - Remote logical username from identd (always returns
        '-')</li>
    <li><b><code>%m</code></b> - Request method (GET, POST, etc.)</li>
    <li><b><code>%p</code></b> - Local port on which this request was received.
        See also <code>%{xxx}p</code> below.</li>
    <li><b><code>%q</code></b> - Query string (prepended with a '?' if it exists)</li>
    <li><b><code>%r</code></b> - First line of the request (method and request URI)</li>
    <li><b><code>%s</code></b> - HTTP status code of the response</li>
    <li><b><code>%S</code></b> - User session ID</li>
    <li><b><code>%t</code></b> - Date and time, in Common Log Format</li>
    <li><b><code>%T</code></b> - Time taken to process the request, in seconds</li>
    <li><b><code>%u</code></b> - Remote user that was authenticated (if any), else '-' (escaped if required)</li>
    <li><b><code>%U</code></b> - Requested URL path</li>
    <li><b><code>%v</code></b> - Local server name</li>
    <li><b><code>%X</code></b> - Connection status when response is completed:
      <ul>
      <li><code>X</code> = Connection aborted before the response completed.</li>
      <li><code>+</code> = Connection may be kept alive after the response is sent.</li>
      <li><code>-</code> = Connection will be closed after the response is sent.</li>
      </ul>
    </li>
    </ul>

    <p>
    There is also support to write information incoming or outgoing
    headers, cookies, session or request attributes and special
    timestamp formats.
    It is modeled after the
    <a href="https://httpd.apache.org/">Apache HTTP Server</a> log configuration
    syntax. Each of them can be used multiple times with different <code>xxx</code> keys:
    </p>
    <ul>
    <li><b><code>%{xxx}a</code></b> write remote address (client) (<code>xxx==remote</code>) or
        connection peer address (<code>xxx=peer</code>)</li>
    <li><b><code>%{xxx}i</code></b> write value of incoming header with name <code>xxx</code> (escaped if required)</li>
    <li><b><code>%{xxx}o</code></b> write value of outgoing header with name <code>xxx</code> (escaped if required)</li>
    <li><b><code>%{xxx}c</code></b> write value of cookie(s) with name <code>xxx</code> (comma separated and escaped if required)</li>
    <li><b><code>%{xxx}r</code></b> write value of ServletRequest attribute with name <code>xxx</code> (escaped if required, value <code>??</code> if request is null)</li>
    <li><b><code>%{xxx}s</code></b> write value of HttpSession attribute with name <code>xxx</code> (escaped if required, value <code>??</code> if request is null)</li>
    <li><b><code>%{xxx}p</code></b> write local (server) port (<code>xxx==local</code>) or
        remote (client) port (<code>xxx=remote</code>)</li>
    <li><b><code>%{xxx}t</code></b> write timestamp at the end of the request formatted using the
        enhanced SimpleDateFormat pattern <code>xxx</code></li>
    <li><b><code>%{xxx}T</code></b> write time taken to process the request using unit <code>xxx</code>
        where valid units are <code>ms</code> for milliseconds, <code>us</code> for microseconds,
        and <code>s</code> for seconds. <code>%{s}T</code> is equivalent to <code>%T</code> as well
        as <code>%{us}T</code> is equivalent to <code>%D</code>.</li>
    </ul>

    <p>All formats supported by SimpleDateFormat are allowed in <code>%{xxx}t</code>.
    In addition the following extensions have been added:</p>
    <ul>
    <li><b><code>sec</code></b> - number of seconds since the epoch</li>
    <li><b><code>msec</code></b> - number of milliseconds since the epoch</li>
    <li><b><code>msec_frac</code></b> - millisecond fraction</li>
    </ul>
    <p>These formats cannot be mixed with SimpleDateFormat formats in the same format
    token.</p>

    <p>Furthermore one can define whether to log the timestamp for the request start
    time or the response finish time:</p>
    <ul>
    <li><b><code>begin</code></b> or prefix <b><code>begin:</code></b> chooses
    the request start time</li>
    <li><b><code>end</code></b> or prefix <b><code>end:</code></b> chooses
    the response finish time</li>
    </ul>
    <p>By adding multiple <code>%{xxx}t</code> tokens to the pattern, one can
    also log both timestamps.</p>

    <p>Escaping is applied as follows:</p>
    <ul>
    <li><code>&quot;</code> is escaped as <code>\&quot;</code></li>
    <li><code>\</code> is escaped as <code>\\</code></li>
    <li>Standard C escaping are used for <code>\f</code>, <code>\n</code>,
        <code>\r</code> and <code>\t</code></li>
    <li>Any other control characters or characters with code points above 127
        are encoded using the standard Java unicode escaping
        (<code>\uXXXX</code>)</li>
    </ul>

    <p>The shorthand pattern <code>pattern=&quot;common&quot;</code>
    corresponds to the Common Log Format defined by
    <strong>'%h %l %u %t &quot;%r&quot; %s %b'</strong>.</p>

    <p>The shorthand pattern <code>pattern=&quot;combined&quot;</code>
    appends the values of the <code>Referer</code> and <code>User-Agent</code>
    headers, each in double quotes, to the <code>common</code> pattern.</p>

    <p>Fields using unknown pattern identifiers will be logged as <code>???X???</code>
    where <code>X</code> is the unknown identifier. Fields with unknown pattern identifier
    plus <code>{xxx}</code> key will be logged as <code>???</code>.</p>

    <p>When Tomcat is operating behind a reverse proxy, the client information
    logged by the Access Log Valve may represent the reverse proxy, the browser
    or some combination of the two depending on the configuration of Tomcat and
    the reverse proxy. For Tomcat configuration options see
    <a href="#Proxies_Support">Proxies Support</a> and the
    <a href="../proxy-howto.html">Proxy How-To</a>. For reverse proxies that
    use mod_jk, see the <a
    href="https://tomcat.apache.org/connectors-doc/generic_howto/proxy.html">generic
    proxy</a> documentation. For other reverse proxies, consult their
    documentation.</p>
  </subsection>

</subsection>


<subsection name="Extended Access Log Valve">

  <subsection name="Introduction">

    <p>The <strong>Extended Access Log Valve</strong> extends the
    <a href="#Access_Log_Valve">Access Log Valve</a> class, and so
    uses the same self-contained logging logic.  This means it
    implements many of the same file handling attributes.  The main
    difference to the standard <code>AccessLogValve</code> is that
    <code>ExtendedAccessLogValve</code> creates log files which
    conform to the Working Draft for the
    <a href="https://www.w3.org/TR/WD-logfile.html">Extended Log File Format</a>
    defined by the W3C.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Extended Access Log Valve</strong> supports all
    configuration attributes of the standard
    <a href="#Access_Log_Valve">Access Log Valve.</a> Only the
    values used for <code>className</code> and <code>pattern</code> differ.</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.ExtendedAccessLogValve</strong> to
        use the extended access log valve.</p>
      </attribute>

      <attribute name="pattern" required="false">
        <p>A formatting layout identifying the various information fields
        from the request and response to be logged.
        See below for more information on configuring this attribute.</p>
      </attribute>

    </attributes>

    <p>Values for the <code>pattern</code> attribute are made up of
    format tokens. Some of the tokens need an additional prefix. Possible
    prefixes are <code>c</code> for "client", <code>s</code> for "server",
    <code>cs</code> for "client to server", <code>sc</code> for
    "server to client" or <code>x</code> for "application specific".
    Furthermore some tokens are completed by an additional selector.
    See the <a href="https://www.w3.org/TR/WD-logfile.html">W3C specification</a>
    for more information about the format.</p>

    <p>The following format tokens are supported:</p>
    <ul>
    <li><b>bytes</b> - Bytes sent, excluding HTTP headers, or '-' if zero</li>
    <li><b>c-dns</b> - Remote host name (or IP address if
        <code>enableLookups</code> for the connector is false)</li>
    <li><b>c-ip</b> - Remote IP address</li>
    <li><b>cs-method</b> - Request method (GET, POST, etc.)</li>
    <li><b>cs-uri</b> - Request URI</li>
    <li><b>cs-uri-query</b> - Query string (prepended with a '?' if it exists)</li>
    <li><b>cs-uri-stem</b> - Requested URL path</li>
    <li><b>date</b> - The date in yyyy-mm-dd format for GMT</li>
    <li><b>s-dns</b> - Local host name</li>
    <li><b>s-ip</b> - Local IP address</li>
    <li><b>sc-status</b> - HTTP status code of the response</li>
    <li><b>time</b> - Time the request was served in HH:mm:ss format for GMT</li>
    <li><b>time-taken</b> - Time (in seconds as floating point) taken to serve the request</li>
    <li><b>x-threadname</b> - Current request thread name (can compare later with stacktraces)</li>
    </ul>

    <p>For any of the <code>x-H(XXX)</code> the following method will be called from the
    HttpServletRequest object:</p>
    <ul>
    <li><b><code>x-H(authType)</code></b>: getAuthType </li>
    <li><b><code>x-H(characterEncoding)</code></b>: getCharacterEncoding </li>
    <li><b><code>x-H(contentLength)</code></b>: getContentLength </li>
    <li><b><code>x-H(locale)</code></b>:  getLocale</li>
    <li><b><code>x-H(protocol)</code></b>: getProtocol </li>
    <li><b><code>x-H(remoteUser)</code></b>:  getRemoteUser</li>
    <li><b><code>x-H(requestedSessionId)</code></b>: getRequestedSessionId</li>
    <li><b><code>x-H(requestedSessionIdFromCookie)</code></b>:
                     isRequestedSessionIdFromCookie </li>
    <li><b><code>x-H(requestedSessionIdValid)</code></b>:
                     isRequestedSessionIdValid</li>
    <li><b><code>x-H(scheme)</code></b>:  getScheme</li>
    <li><b><code>x-H(secure)</code></b>:  isSecure</li>
    </ul>

    <p>
    There is also support to write information about headers
    cookies, context, request or session attributes and request
    parameters.
    </p>
    <ul>
    <li><b><code>cs(XXX)</code></b> for incoming request headers with name XXX</li>
    <li><b><code>sc(XXX)</code></b> for outgoing response headers with name XXX</li>
    <li><b><code>x-A(XXX)</code></b> for the servlet context attribute with name XXX</li>
    <li><b><code>x-C(XXX)</code></b> for the cookie(s) with name XXX (comma separated if required)</li>
    <li><b><code>x-O(XXX)</code></b> for a concatenation of all outgoing response headers with name XXX</li>
    <li><b><code>x-P(XXX)</code></b> for the URL encoded (using UTF-8) request parameter with name XXX</li>
    <li><b><code>x-R(XXX)</code></b> for the request attribute with name XXX</li>
    <li><b><code>x-S(XXX)</code></b> for the session attribute with name XXX</li>
    </ul>

  </subsection>

</subsection>

<subsection name="JSON Access Log Valve">

  <subsection name="Introduction">

    <p>The <strong>JSON Access Log Valve</strong> extends the
    <a href="#Access_Log_Valve">Access Log Valve</a>, and so
    uses the same self-contained logging logic.  This means it
    implements the same file handling attributes.  The main
    difference to the standard <code>AccessLogValve</code> is that
    <code>JsonAccessLogValve</code> creates log files which
    follow the JSON syntax as defined by
    <a href="https://www.rfc-editor.org/rfc/rfc8259.html">RFC 8259</a>.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>JSON Access Log Valve</strong> supports all
    configuration attributes of the standard
    <a href="#Access_Log_Valve">Access Log Valve.</a> Only the
    values used for <code>className</code> differ.</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.JsonAccessLogValve</strong> to
        use the extended access log valve.</p>
      </attribute>

    </attributes>

    <p>While the patterns supported are the same as for the regular
    <a href="#Access_Log_Valve">Access Log Valve</a>,
    there are a few differences:
    <ul>
    <li>requests are logged as JSON objects.</li>
    <li>each supported "%X" single character pattern
        identifier results in a key value pair in this object.
        See below for the list of keys used for the respective pattern
        identifiers.</li>
    <li>each pattern identifiers using a subkey of the form <code>%{xxx}X</code>
        where "X" is one of "a", "p" or "t"
        results in a key value pair of the form "key-xxx".
        See below for the list of keys used for the respective pattern
        identifiers.</li>
    <li>each pattern identifiers using a subkey of the form <code>%{xxx}X</code>
        where "X" is one of "c", "i", "o", "r" or "s"
        results in a sub object. See below for the key pointing at this
        sub object. The keys in the sub object are the "xxx" subkeys in the pattern.</li>
    <li>each unsupported "%X" character pattern
        identifier results in a key value pair using the key "other-X".</li>
    <li>the values logged are the same as the ones logged by
        the standard <a href="#Access_Log_Valve">Access Log Valve</a>
        for the same pattern identifiers.</li>
    <li>any "xxx" subkeys get Json escaped.</li>
    <li>any verbatim text between pattern identifiers gets silently ignored.</li>
    </ul>
    The JSON object keys used for the pattern identifiers which
    do not generate a sub object are the following:
    <ul>
    <li><b><code>%a</code></b>: remoteAddr</li>
    <li><b><code>%A</code></b>: localAddr</li>
    <li><b><code>%b</code></b>: size</li>
    <li><b><code>%B</code></b>: byteSentNC</li>
    <li><b><code>%D</code></b>: elapsedTime</li>
    <li><b><code>%F</code></b>: firstByteTime</li>
    <li><b><code>%h</code></b>: host</li>
    <li><b><code>%H</code></b>: protocol</li>
    <li><b><code>%I</code></b>: threadName</li>
    <li><b><code>%l</code></b>: logicalUserName</li>
    <li><b><code>%m</code></b>: method</li>
    <li><b><code>%p</code></b>: port</li>
    <li><b><code>%q</code></b>: query</li>
    <li><b><code>%r</code></b>: request</li>
    <li><b><code>%s</code></b>: statusCode</li>
    <li><b><code>%S</code></b>: sessionId</li>
    <li><b><code>%t</code></b>: time</li>
    <li><b><code>%T</code></b>: elapsedTimeS</li>
    <li><b><code>%u</code></b>: user</li>
    <li><b><code>%U</code></b>: path</li>
    <li><b><code>%v</code></b>: localServerName</li>
    <li><b><code>%X</code></b>: connectionStatus</li>
    </ul>
    The JSON object keys used for the pattern identifiers which
    generate a sub object are the following:
    <ul>
    <li><b><code>%c</code></b>: cookies</li>
    <li><b><code>%i</code></b>: requestHeaders</li>
    <li><b><code>%o</code></b>: responseHeaders</li>
    <li><b><code>%r</code></b>: requestAttributes</li>
    <li><b><code>%s</code></b>: sessionAttributes</li>
    </ul>
    </p>

  </subsection>

</subsection>

</section>


<section name="Access Control">


<subsection name="Remote Address Valve">

  <subsection name="Introduction">

    <p>The <strong>Remote Address Valve</strong> allows you to compare the
    IP address of the client that submitted this request against one or more
    <em>regular expressions</em>, and either allow the request to continue
    or refuse to process the request from this client.  A Remote Address
    Valve can be associated with any Catalina container
    (<a href="engine.html">Engine</a>, <a href="host.html">Host</a>, or
    <a href="context.html">Context</a>), and must accept any request
    presented to this container for processing before it will be passed on.</p>

    <p>The syntax for <em>regular expressions</em> is different than that for
    'standard' wildcard matching. Tomcat uses the <code>java.util.regex</code>
    package. Please consult the Java documentation for details of the
    expressions supported.</p>

    <p>After setting the attribute <code>addConnectorPort</code> to
    <code>true</code>, one can append the server connector port separated with a
    semicolon (";") to allow different expressions for each connector.</p>

    <p>By setting the attribute <code>usePeerAddress</code> to
    <code>true</code>, the valve will use the connection peer address in its
    checks. This will differ from the client IP, if a reverse proxy is used
    in front of Tomcat in combination with either the AJP protocol, or the
    HTTP protocol plus the <code>RemoteIp(Valve|Filter)</code>.</p>

    <p>A refused request will be answered a response with status code
    <code>403</code>. This status code can be overwritten using the attribute
    <code>denyStatus</code>.</p>

    <p>By setting the attribute <code>invalidAuthenticationWhenDeny</code> to
    <code>true</code>, the behavior when a request is refused can be changed
    to not deny but instead set an invalid <code>authentication</code>
    header. This is useful in combination with the context attribute
    <code>preemptiveAuthentication="true"</code>.</p>

    <p><strong>Note:</strong> There is a caveat when using this valve with
    IPv6 addresses. Format of the IP address that this valve is processing
    depends on the API that was used to obtain it. If the address was obtained
    from Java socket using Inet6Address class, its format will be
    <code>x:x:x:x:x:x:x:x</code>. That is, the IP address for localhost
    will be <code>0:0:0:0:0:0:0:1</code> instead of the more widely used
    <code>::1</code>. Consult your access logs for the actual value.</p>

    <p>See also: <a href="#Remote_Host_Valve">Remote Host Valve</a>,
    <a href="#Remote_CIDR_Valve">Remote CIDR Valve</a>,
    <a href="#Remote_IP_Valve">Remote IP Valve</a>,
    <a href="http.html">HTTP Connector</a> configuration.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote Address Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteAddrValve</strong>.</p>
      </attribute>

      <attribute name="allow" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client&apos;s IP address is compared to.  If this attribute
        is specified, the remote address MUST match for this request to be
        accepted.  If this attribute is not specified, all requests will be
        accepted UNLESS the remote address matches a <code>deny</code>
        pattern.</p>
      </attribute>

      <attribute name="deny" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client's IP address is compared to.  If this attribute
        is specified, the remote address MUST NOT match for this request to be
        accepted.  If this attribute is not specified, request acceptance is
        governed solely by the <code>allow</code> attribute.</p>
      </attribute>

      <attribute name="denyStatus" required="false">
        <p>HTTP response status code that is used when rejecting denied
        request. The default value is <code>403</code>. For example,
        it can be set to the value <code>404</code>.</p>
      </attribute>

      <attribute name="addConnectorPort" required="false">
        <p>Append the server connector port to the client IP address separated
        with a semicolon (";"). If this is set to <code>true</code>, the
        expressions configured with <code>allow</code> and
        <code>deny</code> is compared against <code>ADDRESS;PORT</code>
        where <code>ADDRESS</code> is the client IP address and
        <code>PORT</code> is the Tomcat connector port which received the
        request. The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="invalidAuthenticationWhenDeny" required="false">
        <p>When a request should be denied, do not deny but instead
        set an invalid <code>authentication</code> header. This only works
        if the context has the attribute <code>preemptiveAuthentication="true"</code>
        set. An already existing <code>authentication</code> header will not be
        overwritten. In effect this will trigger authentication instead of deny
        even if the application does not have a security constraint configured.</p>
        <p>This can be combined with <code>addConnectorPort</code> to trigger authentication
        depending on the client and the connector that is used to access an application.</p>
      </attribute>

      <attribute name="usePeerAddress" required="false">
        <p>Use the connection peer address instead of the client IP address.
        They will differ, if a reverse proxy is used in front of Tomcat in
        combination with either the AJP protocol, or the HTTP protocol plus
        the <code>RemoteIp(Valve|Filter)</code>.</p>
      </attribute>

    </attributes>

  </subsection>

  <subsection name="Example 1" anchor="Remote_Address_Valve/Example_localhost">
    <p>To allow access only for the clients connecting from localhost:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteAddrValve"
   allow="127\.\d+\.\d+\.\d+|::1|0:0:0:0:0:0:0:1"/>]]></source>
  </subsection>

  <subsection name="Example 2" anchor="Remote_Address_Valve/Example_localhost_port">
    <p>To allow unrestricted access for the clients connecting from localhost
    but for all other clients only to port 8443:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteAddrValve"
   addConnectorPort="true"
   allow="127\.\d+\.\d+\.\d+;\d*|::1;\d*|0:0:0:0:0:0:0:1;\d*|.*;8443"/>]]></source>
  </subsection>

  <subsection name="Example 3" anchor="Remote_Address_Valve/Example_port_auth">
    <p>To allow unrestricted access to port 8009, but trigger basic
    authentication if the application is accessed on another port:</p>
<source><![CDATA[<Context>
  ...
  <Valve className="org.apache.catalina.valves.RemoteAddrValve"
         addConnectorPort="true"
         invalidAuthenticationWhenDeny="true"
         allow=".*;8009"/>
  <Valve className="org.apache.catalina.authenticator.BasicAuthenticator" />
  ...
</Context>]]></source>
  </subsection>

</subsection>


<subsection name="Remote Host Valve">

  <subsection name="Introduction">

    <p>The <strong>Remote Host Valve</strong> allows you to compare the
    hostname of the client that submitted this request against one or more
    <em>regular expressions</em>, and either allow the request to continue
    or refuse to process the request from this client.  A Remote Host
    Valve can be associated with any Catalina container
    (<a href="engine.html">Engine</a>, <a href="host.html">Host</a>, or
    <a href="context.html">Context</a>), and must accept any request
    presented to this container for processing before it will be passed on.</p>

    <p>The syntax for <em>regular expressions</em> is different than that for
    'standard' wildcard matching. Tomcat uses the <code>java.util.regex</code>
    package. Please consult the Java documentation for details of the
    expressions supported.</p>

    <p>After setting the attribute <code>addConnectorPort</code> to
    <code>true</code>, one can append the server connector port separated with a
    semicolon (";") to allow different expressions for each connector.</p>

    <p>A refused request will be answered a response with status code
    <code>403</code>. This status code can be overwritten using the attribute
    <code>denyStatus</code>.</p>

    <p>By setting the attribute <code>invalidAuthenticationWhenDeny</code> to
    <code>true</code>, the behavior when a request is refused can be changed
    to not deny but instead set an invalid <code>authentication</code>
    header. This is useful in combination with the context attribute
    <code>preemptiveAuthentication="true"</code>.</p>

    <p><strong>Note:</strong> This valve processes the value returned by
    method <code>ServletRequest.getRemoteHost()</code>. To allow the method
    to return proper host names, you have to enable "DNS lookups" feature on
    a <strong>Connector</strong>.</p>

    <p>See also: <a href="#Remote_Address_Valve">Remote Address Valve</a>,
    <a href="#Remote_CIDR_Valve">Remote CIDR Valve</a>,
    <a href="#Remote_IP_Valve">Remote IP Valve</a>,
    <a href="http.html">HTTP Connector</a> configuration.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote Host Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteHostValve</strong>.</p>
      </attribute>

      <attribute name="allow" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client&apos;s hostname is compared to.  If this attribute
        is specified, the remote hostname MUST match for this request to be
        accepted.  If this attribute is not specified, all requests will be
        accepted UNLESS the remote hostname matches a <code>deny</code>
        pattern.</p>
      </attribute>

      <attribute name="deny" required="false">
        <p>A regular expression (using <code>java.util.regex</code>) that the
        remote client's hostname is compared to.  If this attribute
        is specified, the remote hostname MUST NOT match for this request to be
        accepted.  If this attribute is not specified, request acceptance is
        governed solely by the <code>allow</code> attribute.</p>
      </attribute>

      <attribute name="denyStatus" required="false">
        <p>HTTP response status code that is used when rejecting denied
        request. The default value is <code>403</code>. For example,
        it can be set to the value <code>404</code>.</p>
      </attribute>

      <attribute name="addConnectorPort" required="false">
        <p>Append the server connector port to the client hostname separated
        with a semicolon (";"). If this is set to <code>true</code>, the
        expressions configured with <code>allow</code> and
        <code>deny</code> is compared against <code>HOSTNAME;PORT</code>
        where <code>HOSTNAME</code> is the client hostname and
        <code>PORT</code> is the Tomcat connector port which received the
        request. The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="invalidAuthenticationWhenDeny" required="false">
        <p>When a request should be denied, do not deny but instead
        set an invalid <code>authentication</code> header. This only works
        if the context has the attribute <code>preemptiveAuthentication="true"</code>
        set. An already existing <code>authentication</code> header will not be
        overwritten. In effect this will trigger authentication instead of deny
        even if the application does not have a security constraint configured.</p>
        <p>This can be combined with <code>addConnectorPort</code> to trigger authentication
        depending on the client and the connector that is used to access an application.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>

<subsection name="Remote CIDR Valve">

  <subsection name="Introduction">

    <p>The <strong>Remote CIDR Valve</strong> allows you to compare the
      IP address of the client that submitted this request against one or more
      netmasks following the CIDR notation, and either allow the request to
      continue or refuse to process the request from this client. IPv4 and
      IPv6 are both fully supported. A Remote CIDR Valve can be associated
      with any Catalina container (<a href="engine.html">Engine</a>,
      <a href="host.html">Host</a>, or <a href="context.html">Context</a>), and
      must accept any request presented to this container for processing before
      it will be passed on.
    </p>

    <p>This valve mimics Apache's <code>Order</code>,
      <code>Allow from</code> and <code>Deny from</code> directives,
      with the following limitations:
    </p>

    <ul>
      <li><code>Order</code> will always be <code>allow, deny</code>;</li>
      <li>dotted quad notations for netmasks are not supported (that is, you
        cannot write <code>192.168.1.0/255.255.255.0</code>, you must write
        <code>192.168.1.0/24</code>;
      </li>
      <li>shortcuts, like <code>10.10.</code>, which is equivalent to
        <code>10.10.0.0/16</code>, are not supported;
      </li>
      <li>as the valve name says, this is a CIDR only valve,
        therefore subdomain notations like <code>.mydomain.com</code> are not
        supported either.
      </li>
    </ul>

    <p>After setting the attribute <code>addConnectorPort</code> to
    <code>true</code>, one can append the server connector port separated with a
    semicolon (";") to allow different expressions for each connector.</p>

    <p>By setting the attribute <code>usePeerAddress</code> to
    <code>true</code>, the valve will use the connection peer address in its
    checks. This will differ from the client IP, if a reverse proxy is used
    in front of Tomcat in combination with either the AJP protocol, or the
    HTTP protocol plus the <code>RemoteIp(Valve|Filter)</code>.</p>

    <p>A refused request will be answered a response with status code
    <code>403</code>. This status code can be overwritten using the attribute
    <code>denyStatus</code>.</p>

    <p>By setting the attribute <code>invalidAuthenticationWhenDeny</code> to
    <code>true</code>, the behavior when a request is refused can be changed
    to not deny but instead set an invalid <code>authentication</code>
    header. This is useful in combination with the context attribute
    <code>preemptiveAuthentication="true"</code>.</p>

    <p>Some more features of this valve are:
    </p>

    <ul>
      <li>if you omit the CIDR prefix, this valve becomes a single IP
        valve;</li>
      <li>unlike the <a href="#Remote_Host_Valve">Remote Host Valve</a>,
      it can handle IPv6 addresses in condensed form (<code>::1</code>,
      <code>fe80::/71</code>, etc).</li>
    </ul>

    <p>See also: <a href="#Remote_Address_Valve">Remote Address Valve</a>,
    <a href="#Remote_Host_Valve">Remote Host Valve</a>,
    <a href="#Remote_IP_Valve">Remote IP Valve</a>,
    <a href="http.html">HTTP Connector</a> configuration.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote CIDR Valve</strong> supports the following
      configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
          <strong>org.apache.catalina.valves.RemoteCIDRValve</strong>.</p>
      </attribute>

      <attribute name="allow" required="false">
        <p>A comma-separated list of IPv4 or IPv6 netmasks or addresses
          that the remote client&apos;s IP address is matched against.
          If this attribute is specified, the remote address MUST match
          for this request to be accepted. If this attribute is not specified,
          all requests will be accepted UNLESS the remote IP is matched by a
          netmask in the <code>deny</code> attribute.
        </p>
      </attribute>

      <attribute name="deny" required="false">
        <p>A comma-separated list of IPv4 or IPv6 netmasks or addresses
          that the remote client&apos;s IP address is matched against.
          If this attribute is specified, the remote address MUST NOT match
          for this request to be accepted. If this attribute is not specified,
          request acceptance is governed solely by the <code>accept</code>
          attribute.
        </p>
      </attribute>

      <attribute name="denyStatus" required="false">
        <p>HTTP response status code that is used when rejecting denied
        request. The default value is <code>403</code>. For example,
        it can be set to the value <code>404</code>.</p>
      </attribute>

      <attribute name="addConnectorPort" required="false">
        <p>Append the server connector port to the client IP address separated
        with a semicolon (";"). If this is set to <code>true</code>, the
        expressions configured with <code>allow</code> and
        <code>deny</code> is compared against <code>ADDRESS;PORT</code>
        where <code>ADDRESS</code> is the client IP address and
        <code>PORT</code> is the Tomcat connector port which received the
        request. The default value is <code>false</code>.</p>
      </attribute>

      <attribute name="invalidAuthenticationWhenDeny" required="false">
        <p>When a request should be denied, do not deny but instead
        set an invalid <code>authentication</code> header. This only works
        if the context has the attribute <code>preemptiveAuthentication="true"</code>
        set. An already existing <code>authentication</code> header will not be
        overwritten. In effect this will trigger authentication instead of deny
        even if the application does not have a security constraint configured.</p>
        <p>This can be combined with <code>addConnectorPort</code> to trigger authentication
        depending on the client and the connector that is used to access an application.</p>
      </attribute>

      <attribute name="usePeerAddress" required="false">
        <p>Use the connection peer address instead of the client IP address.
        They will differ, if a reverse proxy is used in front of Tomcat in
        combination with either the AJP protocol, or the HTTP protocol plus
        the <code>RemoteIp(Valve|Filter)</code>.</p>
      </attribute>

    </attributes>

  </subsection>

  <subsection name="Example 1" anchor="Remote_CIDR_Valve/Example_localhost">
    <p>To allow access only for the clients connecting from localhost:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteCIDRValve"
   allow="127.0.0.1, ::1"/>]]></source>
  </subsection>

  <subsection name="Example 2" anchor="Remote_CIDR_Valve/Example_localhost_port">
    <p>To allow unrestricted access for the clients connecting from the local network
    but for all clients in network 10. only to port 8443:</p>
    <source><![CDATA[<Valve className="org.apache.catalina.valves.RemoteCIDRValve"
   addConnectorPort="true"
   allow="127.0.0.1;\d*|::1;\d*|10.0.0.0/8;8443"/>]]></source>
  </subsection>

  <subsection name="Example 3" anchor="Remote_CIDR_Valve/Example_port_auth">
    <p>To allow access to port 8009 from network 10., but trigger basic
    authentication if the application is accessed on another port:</p>
<source><![CDATA[<Context>
  ...
  <Valve className="org.apache.catalina.valves.RemoteCIDRValve"
         addConnectorPort="true"
         invalidAuthenticationWhenDeny="true"
         allow="10.0.0.0/8;8009"/>
  <Valve className="org.apache.catalina.authenticator.BasicAuthenticator" />
  ...
</Context>]]></source>
  </subsection>

</subsection>

</section>


<section name="Proxies Support">
  <subsection name="Load Balancer Draining Valve">
    <subsection name="Introduction">
      <p>
        When using mod_jk or mod_proxy_ajp, the client's session id is used to
        determine which back-end server will be used to serve the request. If the
        target node is being "drained" (in mod_jk, this is the <i>DISABLED</i>
        state; in mod_proxy_ajp, this is the <i>Drain (N)</i> state), requests
        for expired sessions can actually cause the draining node to fail to
        drain.
      </p>
      <p>
        Unfortunately, AJP-based load-balancers cannot prove whether the
        client-provided session id is valid or not and therefore will send any
        requests for a session that appears to be targeted to that node to the
        disabled (or "draining") node, causing the "draining" process to take
        longer than necessary.
      </p>
      <p>
        This Valve detects requests for invalid sessions, strips the session
        information from the request, and redirects back to the same URL, where
        the load-balancer should choose a different (active)  node to handle the
        request. This will accelerate the "draining" process for the disabled
        node(s).
      </p>

      <p>
        The activation state of the node is sent by the load-balancer in the
        request, so no state change on the node being disabled is necessary. Simply
        configure this Valve in your valve pipeline and it will take action when
        the activation state is set to "disabled".
      </p>

      <p>
        You should take care to register this Valve earlier in the Valve pipeline
        than any authentication Valves, because this Valve should be able to
        redirect a request before any authentication Valve saves a request to a
        protected resource. If this happens, a new session will be created and
        the draining process will stall because a new, valid session will be
        established.
      </p>
    </subsection><!-- / Introduction -->

    <subsection name="Attributes">
      <p>The <strong>Load Balancer Draining Valve</strong> supports the
      following configuration attributes:</p>

      <attributes>
        <attribute name="className" required="true">
          <p>Java class name of the implementation to use. This MUST be set to
          <strong>org.apache.catalina.valves.LoadBalancerDrainingValve</strong>.
          </p>
        </attribute>

        <attribute name="redirectStatusCode" required="false">
          <p>Allows setting a custom redirect code to be used when the client
          is redirected to be re-balanced by the load-balancer. The default is
          307 TEMPORARY_REDIRECT.</p>
        </attribute>

        <attribute name="ignoreCookieName" required="false">
          <p>When used with <code>ignoreCookieValue</code>, a client can present
          this cookie (and accompanying value) that will cause this Valve to
          do nothing. This will allow you to probe your <i>disabled</i> node
          before re-enabling it to make sure that it is working as expected.</p>
        </attribute>

        <attribute name="ignoreCookieValue" required="false">
          <p>When used with <code>ignoreCookieName</code>, a client can present
          a cookie (and accompanying value) that will cause this Valve to
          do nothing. This will allow you to probe your <i>disabled</i> node
          before re-enabling it to make sure that it is working as expected.</p>
        </attribute>
      </attributes>
    </subsection><!-- /Attributes -->
  </subsection><!-- /Load Balancer Draining Valve -->

<subsection name="Remote IP Valve">

  <subsection name="Introduction">

    <p>Tomcat port of
    <a href="https://httpd.apache.org/docs/trunk/mod/mod_remoteip.html">mod_remoteip</a>,
    this valve replaces the apparent client remote IP address and hostname for
    the request with the IP address list presented by a proxy or a load balancer
    via a request headers (e.g. &quot;X-Forwarded-For&quot;).</p>

    <p>Another feature of this valve is to replace the apparent scheme
    (http/https), server port and <code>request.secure</code> with the scheme presented
    by a proxy or a load balancer via a request header
    (e.g. &quot;X-Forwarded-Proto&quot;).</p>

    <p>This Valve may be used at the <code>Engine</code>, <code>Host</code> or
    <code>Context</code> level as required. Normally, this Valve would be used
    at the <code>Engine</code> level.</p>

    <p>If used in conjunction with Remote Address/Host valves then this valve
    should be defined first to ensure that the correct client IP address is
    presented to the Remote Address/Host valves.</p>

    <p><strong>Note:</strong> By default this valve has no effect on the
    values that are written into access log. The original values are restored
    when request processing leaves the valve and that always happens earlier
    than access logging. To pass the remote address, remote host, server port
    and protocol values set by this valve to the access log,
    they are put into request attributes. Publishing these values here
    is enabled by default, but <code>AccessLogValve</code> should be explicitly
    configured to use them. See documentation for
    <code>requestAttributesEnabled</code> attribute of
    <code>AccessLogValve</code>.</p>

    <p>The names of request attributes that are set by this valve
    and can be used by access logging are the following:</p>

    <ul>
      <li><code>org.apache.catalina.AccessLog.RemoteAddr</code></li>
      <li><code>org.apache.catalina.AccessLog.RemoteHost</code></li>
      <li><code>org.apache.catalina.AccessLog.Protocol</code></li>
      <li><code>org.apache.catalina.AccessLog.ServerPort</code></li>
      <li><code>org.apache.tomcat.remoteAddr</code></li>
    </ul>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Remote IP Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.RemoteIpValve</strong>.</p>
      </attribute>

      <attribute name="remoteIpHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the list of
        traversed IP addresses starting from the requesting client. If not
        specified, the default of <code>x-forwarded-for</code> is used.</p>
      </attribute>

      <attribute name="internalProxies" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that a
        proxy&apos;s IP address must match to be considered an internal proxy.
        Internal proxies that appear in the <strong>remoteIpHeader</strong> will
        be trusted and will not appear in the <strong>proxiesHeader</strong>
        value. If not specified the default value of <code>
        10\.\d{1,3}\.\d{1,3}\.\d{1,3}|192\.168\.\d{1,3}\.\d{1,3}|169\.254\.\d{1,3}\.\d{1,3}|127\.\d{1,3}\.\d{1,3}\.\d{1,3}|100\.6[4-9]{1}\.\d{1,3}\.\d{1,3}|100\.[7-9]{1}\d{1}\.\d{1,3}\.\d{1,3}|100\.1[0-1]{1}\d{1}\.\d{1,3}\.\d{1,3}|100\.12[0-7]{1}\.\d{1,3}\.\d{1,3}|172\.1[6-9]{1}\.\d{1,3}\.\d{1,3}|172\.2[0-9]{1}\.\d{1,3}\.\d{1,3}|172\.3[0-1]{1}\.\d{1,3}\.\d{1,3}|0:0:0:0:0:0:0:1
        </code> will be used.</p>
      </attribute>

      <attribute name="proxiesHeader" required="false">
        <p>Name of the HTTP header created by this valve to hold the list of
        proxies that have been processed in the incoming
        <strong>remoteIpHeader</strong>. If not specified, the default of
        <code>x-forwarded-by</code> is used.</p>
      </attribute>

      <attribute name="requestAttributesEnabled" required="false">
        <p>Set to <code>true</code> to set the request attributes used by
        AccessLog implementations to override the values returned by the
        request for remote address, remote host, server port and protocol.
        Request attributes are also used to enable the forwarded remote address
        to be displayed on the status page of the Manager web application.
        If not set, the default value of <code>true</code> will be used.</p>
      </attribute>

      <attribute name="trustedProxies" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that a
        proxy&apos;s IP address must match to be considered an trusted proxy.
        Trusted proxies that appear in the <strong>remoteIpHeader</strong> will
        be trusted and will appear in the <strong>proxiesHeader</strong> value.
        If not specified, no proxies will be trusted.</p>
      </attribute>

      <attribute name="protocolHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the protocol
        used by the client to connect to the proxy. If not specified, the
        default of <code>X-Forwarded-Proto</code> is used.</p>
      </attribute>

      <attribute name="hostHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the host
        used by the client to connect to the proxy. If not specified, the
        default of <code>null</code> is used.</p>
      </attribute>

      <attribute name="portHeader" required="false">
        <p>Name of the HTTP Header read by this valve that holds the port
        used by the client to connect to the proxy. If not specified, the
        default of <code>null</code> is used.</p>
      </attribute>

      <attribute name="protocolHeaderHttpsValue" required="false">
        <p>Value of the <strong>protocolHeader</strong> to indicate that it is
        an HTTPS request. If not specified, the default of <code>https</code> is
        used.</p>
      </attribute>

      <attribute name="httpServerPort" required="false">
         <p>Value returned by <code>ServletRequest.getServerPort()</code>
         when the <strong>protocolHeader</strong> indicates <code>http</code>
         protocol and no <strong>portHeader</strong> is present. If not
         specified, the default of <code>80</code> is used.</p>
      </attribute>

      <attribute name="httpsServerPort" required="false">
         <p>Value returned by <code>ServletRequest.getServerPort()</code>
         when the <strong>protocolHeader</strong> indicates <code>https</code>
         protocol and no <strong>portHeader</strong> is present. If not
         specified, the default of <code>443</code> is used.</p>
      </attribute>

      <attribute name="changeLocalName" required="false">
        <p>If <code>true</code>, the value returned by
        <code>ServletRequest.getLocalHost()</code> and
        <code>ServletRequest.getServerHost()</code> is modified by the this
        valve. If not specified, the default of <code>false</code> is used.</p>
      </attribute>

      <attribute name="changeLocalPort" required="false">
        <p>If <code>true</code>, the value returned by
        <code>ServletRequest.getLocalPort()</code> and
        <code>ServletRequest.getServerPort()</code> is modified by the this
        valve. If not specified, the default of <code>false</code> is used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SSL Valve">

  <subsection name="Introduction">

    <p>When using mod_proxy_http, the client SSL information is not included in
    the protocol (unlike mod_jk and mod_proxy_ajp). To make the client SSL
    information available to Tomcat, some additional configuration is required.
    In httpd, mod_headers is used to add the SSL information as HTTP headers. In
    Tomcat, this valve is used to read the information from the HTTP headers and
    insert it into the request.</p>

    <p>Note: Ensure that the headers are always set by httpd for all requests to
    prevent a client spoofing SSL information by sending fake headers.</p>

    <p>To configure httpd to set the necessary headers, add the following:</p>
<source>&lt;IfModule ssl_module&gt;
  RequestHeader set SSL_CLIENT_CERT "%{SSL_CLIENT_CERT}s"
  RequestHeader set SSL_CIPHER "%{SSL_CIPHER}s"
  RequestHeader set SSL_SESSION_ID "%{SSL_SESSION_ID}s"
  RequestHeader set SSL_CIPHER_USEKEYSIZE "%{SSL_CIPHER_USEKEYSIZE}s"
&lt;/IfModule&gt;</source>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SSL Valve</strong> supports the following configuration
    attribute:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.SSLValve</strong>.
        </p>
      </attribute>

      <attribute name="sslClientCertHeader" required="false">
        <p>Allows setting a custom name for the ssl_client_cert header.
        If not specified, the default of <code>ssl_client_cert</code> is
        used.</p>
      </attribute>

      <attribute name="sslClientEscapedCertHeader" required="false">
        <p>Allows setting a custom name for the ssl_client_escaped_cert header.
        If not specified, the default of <code>ssl_client_escaped_cert</code> is
        used.</p>
        <p>This header is useful for Nginx proxying, and takes precedence over
        the ssl_client_cert header.</p>
      </attribute>

      <attribute name="sslCipherHeader" required="false">
        <p>Allows setting a custom name for the ssl_cipher header.
        If not specified, the default of <code>ssl_cipher</code> is
        used.</p>
      </attribute>

      <attribute name="sslSessionIdHeader" required="false">
        <p>Allows setting a custom name for the ssl_session_id header.
        If not specified, the default of <code>ssl_session_id</code> is
        used.</p>
      </attribute>

      <attribute name="sslCipherUserKeySizeHeader" required="false">
        <p>Allows setting a custom name for the ssl_cipher_usekeysize header.
        If not specified, the default of <code>ssl_cipher_usekeysize</code> is
        used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


</section>

<section name="Single Sign On Valve">

  <subsection name="Introduction">

    <p>The <em>Single Sign On Valve</em> is utilized when you wish to give users
    the ability to sign on to any one of the web applications associated with
    your virtual host, and then have their identity recognized by all other
    web applications on the same virtual host.</p>

    <p>See the <a href="host.html#Single_Sign_On">Single Sign On</a> special
    feature on the <strong>Host</strong> element for more information.</p>

  </subsection>


  <subsection name="Attributes">

    <p>The <strong>Single Sign On</strong> Valve supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SingleSignOn</strong>.</p>
      </attribute>

      <attribute name="requireReauthentication" required="false">
        <p>Default false. Flag to determine whether each request needs to be
        reauthenticated to the security <strong>Realm</strong>. If "true", this
        Valve uses cached security credentials (username and password) to
        reauthenticate to the <strong>Realm</strong> each request associated
        with an SSO session.  If "false", the Valve can itself authenticate
        requests based on the presence of a valid SSO cookie, without
        rechecking with the <strong>Realm</strong>.</p>
      </attribute>

      <attribute name="cookieDomain" required="false">
        <p>Sets the host domain to be used for sso cookies.</p>
      </attribute>

      <attribute name="cookieName" required="false">
        <p>Sets the cookie name to be used for sso cookies. The default value
        is <code>JSESSIONIDSSO</code></p>
      </attribute>

    </attributes>

  </subsection>


</section>


<section name="Authentication">

<p>The valves in this section implement
<strong>org.apache.catalina.Authenticator</strong> interface.</p>

<subsection name="Basic Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Basic Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use BASIC
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Basic Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="allowCorsPreflight" required="false">
        <p>Are requests that appear to be CORS preflight requests allowed to
        bypass the authenticator as required by the CORS specification. The
        allowed values are <code>never</code>, <code>filter</code> and
        <code>always</code>. <code>never</code> means that a request will never
        bypass authentication even if it appears to be a CORS preflight request.
        <code>filter</code> means that a request will bypass authentication if
        it appears to be a CORS preflight request; it is mapped to a web
        application that has the <a href="filter.html#CORS_Filter">CORS
        Filter</a> enabled; and the CORS Filter is mapped to <code>/*</code>.
        <code>always</code> means that all requests that appear to be CORS
        preflight requests will bypass authentication. If not set, the default
        value is <code>never</code>.</p>
      </attribute>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user via the Realm on every request. This may be of
        help for combinations such as BASIC authentication used with the
        JNDIRealm or DataSourceRealms. However there will also be the
        performance cost of creating and GC'ing the session. If not set, the
        default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="charset" required="false">
        <p>Controls if the <code>WWW-Authenticate</code> HTTP header includes a
        <code>charset</code> authentication parameter as per RFC 7617. The only
        permitted options are <code>null</code>, the empty string and
        <code>UTF-8</code>. If <code>UTF-8</code> is specified then the
        <code>charset</code> authentication parameter will be sent with that
        value and the provided user name and optional password will be converted
        from bytes to characters using UTF-8. Otherwise, no <code>charset</code>
        authentication parameter will be sent and the provided user name and
        optional password will be converted from bytes to characters using
        ISO-8859-1. The default value is <code>null</code></p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.BasicAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="jaspicCallbackHandlerClass" required="false">
        <p>Name of the Java class of the
        <code>javax.security.auth.callback.CallbackHandler</code> implementation
        which should be used by JASPIC. If none is specified the default
        <code>org.apache.catalina.authenticator.jaspic.CallbackHandlerImpl</code>
        will be used.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="sendAuthInfoResponseHeaders" required="false">
        <p>Controls whether the auth information (remote user and auth type)
        shall be returned as response headers for a forwarded/proxied request.
        When the <code>RemoteIpValve</code> or <code>RemoteIpFilter</code> mark
        a forwarded request with the <code>Globals.REQUEST_FORWARDED_ATTRIBUTE</code>
        this authenticator can return the values of
        <code>HttpServletRequest.getRemoteUser()</code> and
        <code>HttpServletRequest.getAuthType()</code> as response headers
        <code>remote-user</code> and <code>auth-type</code> to a reverse proxy.
        This is useful, e.g., for access log consistency or other decisions to make.
        If not specified, the default value is <code>false</code>.</p>
      </attribute>

      <attribute name="trimCredentials" required="false">
        <p>Controls whether leading and/or trailing whitespace is removed from
        the parsed credentials. If not specified, the default value is
        <code>true</code>.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="Digest Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Digest Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use DIGEST
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Digest Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="algorithms" required="false">
        <p>A comma-separated list of digest algorithms to be used for the
        authentication process. Algorithms may be specified using the Java
        Standard names or the names used by RFC 7616. If not specified, the
        default value of <code>SHA-256,MD5</code> will be used.</p>
      </attribute>

      <attribute name="allowCorsPreflight" required="false">
        <p>Are requests that appear to be CORS preflight requests allowed to
        bypass the authenticator as required by the CORS specification. The
        allowed values are <code>never</code>, <code>filter</code> and
        <code>always</code>. <code>never</code> means that a request will never
        bypass authentication even if it appears to be a CORS preflight request.
        <code>filter</code> means that a request will bypass authentication if
        it appears to be a CORS preflight request; it is mapped to a web
        application that has the <a href="filter.html#CORS_Filter">CORS
        Filter</a> enabled; and the CORS Filter is mapped to <code>/*</code>.
        <code>always</code> means that all requests that appear to be CORS
        preflight requests will bypass authentication. If not set, the default
        value is <code>never</code>.</p>
      </attribute>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user via the Realm on every request. This may be of
        help for combinations such as BASIC authentication used with the
        JNDIRealm or DataSourceRealms. However there will also be the
        performance cost of creating and GC'ing the session. If not set, the
        default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>false</code>
        will be used.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.DigestAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="jaspicCallbackHandlerClass" required="false">
        <p>Name of the Java class of the
        <code>javax.security.auth.callback.CallbackHandler</code> implementation
        which should be used by JASPIC. If none is specified the default
        <code>org.apache.catalina.authenticator.jaspic.CallbackHandlerImpl</code>
        will be used.</p>
      </attribute>

      <attribute name="key" required="false">
        <p>The secret key used by digest authentication. If not set, a secure
        random value is generated. This should normally only be set when it is
        necessary to keep key values constant either across server restarts
        and/or across a cluster.</p>
      </attribute>

      <attribute name="nonceCacheSize" required="false">
        <p>To protect against replay attacks, the DIGEST authenticator tracks
        server nonce and nonce count values. This attribute controls the size
        of that cache. If not specified, the default value of 1000 is used.</p>
      </attribute>

      <attribute name="nonceCountWindowSize" required="false">
        <p>Client requests may be processed out of order which in turn means
        that the nonce count values may be processed out of order. To prevent
        authentication failures when nonce counts are presented out of order
        the authenticator tracks a window of nonce count values. This attribute
        controls how big that window is. If not specified, the default value of
        100 is used.</p>
      </attribute>

      <attribute name="nonceValidity" required="false">
        <p>The time, in milliseconds, that a server generated nonce will be
        considered valid for use in authentication. If not specified, the
        default value of 300000 (5 minutes) will be used.</p>
      </attribute>

      <attribute name="opaque" required="false">
        <p>The opaque server string used by digest authentication. If not set, a
        random value is generated. This should normally only be set when it is
        necessary to keep opaque values constant either across server restarts
        and/or across a cluster.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="sendAuthInfoResponseHeaders" required="false">
        <p>Controls whether the auth information (remote user and auth type)
        shall be returned as response headers for a forwarded/proxied request.
        When the <code>RemoteIpValve</code> or <code>RemoteIpFilter</code> mark
        a forwarded request with the <code>Globals.REQUEST_FORWARDED_ATTRIBUTE</code>
        this authenticator can return the values of
        <code>HttpServletRequest.getRemoteUser()</code> and
        <code>HttpServletRequest.getAuthType()</code> as response headers
        <code>remote-user</code> and <code>auth-type</code> to a reverse proxy.
        This is useful, e.g., for access log consistency or other decisions to make.
        If not specified, the default value is <code>false</code>.</p>
      </attribute>

      <attribute name="validateUri" required="false">
        <p>Should the URI be validated as required by RFC2617? If not specified,
        the default value of <code>true</code> will be used. This should
        normally only be set when Tomcat is located behind a reverse proxy and
        the proxy is modifying the URI passed to Tomcat such that DIGEST
        authentication always fails.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="Form Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>Form Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use FORM
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Form Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="allowCorsPreflight" required="false">
        <p>Are requests that appear to be CORS preflight requests allowed to
        bypass the authenticator as required by the CORS specification. The
        allowed values are <code>never</code>, <code>filter</code> and
        <code>always</code>. <code>never</code> means that a request will never
        bypass authentication even if it appears to be a CORS preflight request.
        <code>filter</code> means that a request will bypass authentication if
        it appears to be a CORS preflight request; it is mapped to a web
        application that has the <a href="filter.html#CORS_Filter">CORS
        Filter</a> enabled; and the CORS Filter is mapped to <code>/*</code>.
        <code>always</code> means that all requests that appear to be CORS
        preflight requests will bypass authentication. If not set, the default
        value is <code>never</code>.</p>
      </attribute>

      <attribute name="authenticationSessionTimeout" required="false">
        <p>If the authentication process creates a session, this is the maximum session timeout (in seconds) during the
        authentication process. Once authentication is complete, the default session timeout will apply. Sessions that
        exist before the authentication process starts will retain their original session timeout throughout. If not
        set, the default value of <code>120</code> seconds will be used.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="characterEncoding" required="false">
        <p>Character encoding to use to read the username and password parameters
        from the request. If not set, the encoding of the request body will be
        used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.FormAuthenticator</strong>.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="jaspicCallbackHandlerClass" required="false">
        <p>Name of the Java class of the
        <code>javax.security.auth.callback.CallbackHandler</code> implementation
        which should be used by JASPIC. If none is specified the default
        <code>org.apache.catalina.authenticator.jaspic.CallbackHandlerImpl</code>
        will be used.</p>
      </attribute>

      <attribute name="landingPage" required="false">
        <p>Controls the behavior of the FORM authentication process if the
        process is misused, for example by directly requesting the login page
        or delaying logging in for so long that the session expires. If this
        attribute is set, rather than returning an error response code, Tomcat
        will redirect the user to the specified landing page if the login form
        is submitted with valid credentials. For the login to be processed, the
        landing page must be a protected resource (i.e. one that requires
        authentication). If the landing page does not require authentication
        then the user will not be logged in and will be prompted for their
        credentials again when they access a protected page.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="sendAuthInfoResponseHeaders" required="false">
        <p>Controls whether the auth information (remote user and auth type)
        shall be returned as response headers for a forwarded/proxied request.
        When the <code>RemoteIpValve</code> or <code>RemoteIpFilter</code> mark
        a forwarded request with the <code>Globals.REQUEST_FORWARDED_ATTRIBUTE</code>
        this authenticator can return the values of
        <code>HttpServletRequest.getRemoteUser()</code> and
        <code>HttpServletRequest.getAuthType()</code> as response headers
        <code>remote-user</code> and <code>auth-type</code> to a reverse proxy.
        This is useful, e.g., for access log consistency or other decisions to make.
        If not specified, the default value is <code>false</code>.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SSL Authenticator Valve">

  <subsection name="Introduction">

    <p>The <strong>SSL Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use SSL
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SSL Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="allowCorsPreflight" required="false">
        <p>Are requests that appear to be CORS preflight requests allowed to
        bypass the authenticator as required by the CORS specification. The
        allowed values are <code>never</code>, <code>filter</code> and
        <code>always</code>. <code>never</code> means that a request will never
        bypass authentication even if it appears to be a CORS preflight request.
        <code>filter</code> means that a request will bypass authentication if
        it appears to be a CORS preflight request; it is mapped to a web
        application that has the <a href="filter.html#CORS_Filter">CORS
        Filter</a> enabled; and the CORS Filter is mapped to <code>/*</code>.
        <code>always</code> means that all requests that appear to be CORS
        preflight requests will bypass authentication. If not set, the default
        value is <code>never</code>.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SSLAuthenticator</strong>.</p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="jaspicCallbackHandlerClass" required="false">
        <p>Name of the Java class of the
        <code>javax.security.auth.callback.CallbackHandler</code> implementation
        which should be used by JASPIC. If none is specified the default
        <code>org.apache.catalina.authenticator.jaspic.CallbackHandlerImpl</code>
        will be used.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


<subsection name="SPNEGO Valve">

  <subsection name="Introduction">

    <p>The <strong>SPNEGO Authenticator Valve</strong> is automatically added to
    any <a href="context.html">Context</a> that is configured to use SPNEGO
    authentication.</p>

    <p>If any non-default settings are required, the valve may be configured
    within <a href="context.html">Context</a> element with the required
    values.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>SPNEGO Authenticator Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="allowCorsPreflight" required="false">
        <p>Are requests that appear to be CORS preflight requests allowed to
        bypass the authenticator as required by the CORS specification. The
        allowed values are <code>never</code>, <code>filter</code> and
        <code>always</code>. <code>never</code> means that a request will never
        bypass authentication even if it appears to be a CORS preflight request.
        <code>filter</code> means that a request will bypass authentication if
        it appears to be a CORS preflight request and the web application the
        request maps to has the <a href="filter.html#CORS_Filter">CORS
        Filter</a> enabled and mapped to <code>/*</code>. <code>always</code>
        means that all requests that appear to be CORS preflight requests will
        bypass authentication. If not set, the default value is
        <code>never</code>.</p>
      </attribute>

      <attribute name="alwaysUseSession" required="false">
        <p>Should a session always be used once a user is authenticated? This
        may offer some performance benefits since the session can then be used
        to cache the authenticated Principal, hence removing the need to
        authenticate the user on every request. This will also help with clients
        that assume that the server will cache the authenticated user. However
        there will also be the performance cost of creating and GC'ing the
        session. For an alternative solution see
        <code>noKeepAliveUserAgents</code>. If not set, the default value of
        <code>false</code> will be used.</p>
      </attribute>

      <attribute name="applyJava8u40Fix" required="false">
        <p>A fix introduced in Java 8 update 40 (
        <a href="https://bugs.openjdk.java.net/browse/JDK-8048194">JDK-8048194</a>)
        onwards broke SPNEGO authentication for IE with Tomcat running on
        Windows 2008 R2 servers. This option enables a work-around that allows
        SPNEGO authentication to continue working. The work-around should not
        impact other configurations so it is enabled by default. If necessary,
        the workaround can be disabled by setting this attribute to
        <code>false</code>.</p>
      </attribute>

      <attribute name="cache" required="false">
        <p>Should we cache authenticated Principals if the request is part of an
        HTTP session? If not specified, the default value of <code>true</code>
        will be used.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.authenticator.SpnegoAuthenticator</strong>.
        </p>
      </attribute>

      <attribute name="changeSessionIdOnAuthentication" required="false">
        <p>Controls if the session ID is changed if a session exists at the
        point where users are authenticated. This is to prevent session fixation
        attacks. If not set, the default value of <code>true</code> will be
        used.</p>
      </attribute>

      <attribute name="disableProxyCaching" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers but will also cause secured pages to be
        cached by proxies which will almost certainly be a security issue.
        <code>securePagesWithPragma</code> offers an alternative, secure,
        workaround for browser caching issues. If not set, the default value of
        <code>true</code> will be used.</p>
      </attribute>

      <attribute name="jaspicCallbackHandlerClass" required="false">
        <p>Name of the Java class of the
        <code>javax.security.auth.callback.CallbackHandler</code> implementation
        which should be used by JASPIC. If none is specified the default
        <code>org.apache.catalina.authenticator.jaspic.CallbackHandlerImpl</code>
        will be used.</p>
      </attribute>

      <attribute name="loginConfigName" required="false">
        <p>The name of the JAAS login configuration to be used to login as the
        service. If not specified, the default of
        <code>com.sun.security.jgss.krb5.accept</code> is used.</p>
      </attribute>

      <attribute name="noKeepAliveUserAgents" required="false">
        <p>Some clients (not most browsers) expect the server to cache the
        authenticated user information for a connection and do not resend the
        credentials with every request. Tomcat will not do this unless an HTTP
        session is available. A session will be available if either the
        application creates one or if <code>alwaysUseSession</code> is enabled
        for this Authenticator.</p>
        <p>As an alternative to creating a session, this attribute may be used
        to define the user agents for which HTTP keep-alive is disabled. This
        means that a connection will only used for a single request and hence
        there is no ability to cache authenticated user information per
        connection. There will be a performance cost in disabling HTTP
        keep-alive.</p>
        <p>The attribute should be a regular expression that matches the entire
        user-agent string, e.g. <code>.*Chrome.*</code>. If not specified, no
        regular expression will be defined and no user agents will have HTTP
        keep-alive disabled.</p>
      </attribute>

      <attribute name="securePagesWithPragma" required="false">
        <p>Controls the caching of pages that are protected by security
        constraints. Setting this to <code>false</code> may help work around
        caching issues in some browsers by using
        <code>Cache-Control: private</code> rather than the default of
        <code>Pragma: No-cache</code> and <code>Cache-control: No-cache</code>.
        If not set, the default value of <code>false</code> will be used.</p>
      </attribute>

      <attribute name="secureRandomAlgorithm" required="false">
        <p>Name of the algorithm to use to create the
        <code>java.security.SecureRandom</code> instances that generate session
        IDs. If an invalid algorithm and/or provider is specified, the platform
        default provider and the default algorithm will be used. If not
        specified, the default algorithm of SHA1PRNG will be used. If the
        default algorithm is not supported, the platform default will be used.
        To specify that the platform default should be used, do not set the
        secureRandomProvider attribute and set this attribute to the empty
        string.</p>
      </attribute>

      <attribute name="secureRandomClass" required="false">
        <p>Name of the Java class that extends
        <code>java.security.SecureRandom</code> to use to generate SSO session
        IDs. If not specified, the default value is
        <code>java.security.SecureRandom</code>.</p>
      </attribute>

      <attribute name="secureRandomProvider" required="false">
        <p>Name of the provider to use to create the
        <code>java.security.SecureRandom</code> instances that generate SSO
        session IDs. If an invalid algorithm and/or provider is specified, the
        platform default provider and the default algorithm will be used. If not
        specified, the platform default provider will be used.</p>
      </attribute>

      <attribute name="sendAuthInfoResponseHeaders" required="false">
        <p>Controls whether the auth information (remote user and auth type)
        shall be returned as response headers for a forwarded/proxied request.
        When the <code>RemoteIpValve</code> or <code>RemoteIpFilter</code> mark
        a forwarded request with the <code>Globals.REQUEST_FORWARDED_ATTRIBUTE</code>
        this authenticator can return the values of
        <code>HttpServletRequest.getRemoteUser()</code> and
        <code>HttpServletRequest.getAuthType()</code> as response headers
        <code>remote-user</code> and <code>auth-type</code> to a reverse proxy.
        This is useful, e.g., for access log consistency or other decisions to make.
        If not specified, the default value is <code>false</code>.</p>
      </attribute>

      <attribute name="storeDelegatedCredential" required="false">
        <p>Controls if the user&apos; delegated credential will be stored in
        the user Principal. If available, the delegated credential will be
        available to applications (e.g. for onward authentication to external
        services) via the <code>org.apache.catalina.realm.GSS_CREDENTIAL</code>
        request attribute. If not set, the default value of <code>true</code>
        will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</subsection>


</section>


<section name="Error Report Valve">

  <subsection name="Introduction">

    <p>The <strong>Error Report Valve</strong> is a simple error handler
    for HTTP status codes that will generate and return HTML error pages. It can
    also be configured to return pre-defined static HTML pages for specific
    status codes and/or exception types.</p>

    <p><strong>NOTE:</strong> Disabling both showServerInfo and showReport will
    only return the HTTP status code.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Error Report Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.ErrorReportValve</strong> to use the
        default error report valve.</p>
      </attribute>

      <attribute name="errorCode.nnn" required="false">
        <p>The location of the UTF-8 encoded HTML file to return for the HTTP
        error code represented by <code>nnn</code>. For example,
        <code>errorCode.404</code> specifies the file to return for an HTTP 404
        error. The location may be relative or absolute. If relative, it must be
        relative to <code>$CATALINA_BASE</code>. The special value of
        <code>errorCode.0</code> may be used to define a default error page to
        be used if no error page is defined for a status code. If no matching
        error page is found, the default <strong>Error Report Valve</strong>
        response will be returned.</p>
      </attribute>

      <attribute name="exceptionType.fullyQualifiedClassName" required="false">
        <p>The location of the UTF-8 encoded HTML file to return if an error has
        occurred and the <code>jakarta.servlet.error.exception</code> request
        attribute has been set to an instance of
        <code>fullyQualifiedClassName</code> or a sub-class of it. For example,
        <code>errorCode.java.io.IOException</code> specifies the file to return
        for an <code>IOException</code>. The location may be relative or
        absolute. If relative, it must be relative to
        <code>$CATALINA_BASE</code>. If no matching error page is found, the
        default <strong>Error Report Valve</strong> response will be
        returned.</p>
      </attribute>

      <attribute name="showReport" required="false">
        <p>Flag to determine if the error report (custom error message and/or
           stack trace) is presented when an error occurs. If set to
           <code>false</code>, then the error report is not returned in the HTML
           response.
           Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="showServerInfo" required="false">
        <p>Flag to determine if server information is presented when an error
           occurs. If set to <code>false</code>, then the server version is not
           returned in the HTML response.
           Default value: <code>true</code>
        </p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Json Error Report Valve">

  <subsection name="Introduction">

    <p>The <strong>Json Error Report Valve</strong> is a simple error handler
    for HTTP status codes that will return Json error messages.</p>

    <p>By specifying this class in <code>errorReportValveClass</code> attribute
    in <code>Host</code>, it will be used instead of
    <code>ErrorReportValve</code> and will return JSON response instead of HTML.
    </p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Json Error Report Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.JsonErrorReportValve</strong>.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Proxy Error Report Valve">

  <subsection name="Introduction">

    <p>The <strong>Proxy Error Report Valve</strong> is a simple error handler
    for HTTP status codes that will redirect or proxy to another location
    responsible for the generation of the error report.</p>

    <p>By specifying this class in <code>errorReportValveClass</code> attribute
    in <code>Host</code>, it will be used instead of
    <code>ErrorReportValve</code> with the default attribute values. To
    configure the attributes, the valve can be defined nested in the
    <code>Host</code> element.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Proxy Error Report Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.ProxyErrorReportValve</strong>.</p>
      </attribute>

      <attribute name="usePropertiesFile" required="false">
        <p>If <code>true</code>, the valve will use the properties file
        described below to associate the URLs with the status code.
        If <code>false</code>, the configuration mechanism of the default
        <code>ErrorReportValve</code> will be used instead. The default
        value is <code>false</code>.</p>
      </attribute>

      <attribute name="useRedirect" required="false">
        <p>If <code>true</code>, the valve will send a redirect to the URL.
        If <code>false</code>, the valve will instead proxy the content from
        the specified URL. The default value is <code>true</code>.</p>
      </attribute>

    </attributes>

  </subsection>

  <subsection name="Configuration">

    <p>The <strong>Proxy Error Report Valve</strong> can use a resource file
    <strong>ProxyErrorReportValve.properties</strong>
    from the class path, where each entry is a statusCode=baseUrl. baseUrl
    should not include any url parameters, statusCode, statusDescription,
    requestUri, and throwable which will be automatically appended. A special
    key named <code>0</code> should be used to match any other unmapped
    code to a redirect or proxy URL.</p>

  </subsection>

</section>

<section name="Crawler Session Manager Valve">

  <subsection name="Introduction">

    <p>Web crawlers can trigger the creation of many thousands of sessions as
    they crawl a site which may result in significant memory consumption. This
    Valve ensures that crawlers are associated with a single session - just like
    normal users - regardless of whether or not they provide a session token
    with their requests.</p>

    <p>This Valve may be used at the <code>Engine</code>, <code>Host</code> or
    <code>Context</code> level as required. Normally, this Valve would be used
    at the <code>Engine</code> level.</p>

    <p>If used in conjunction with Remote IP valve then the Remote IP valve
    should be defined before this valve to ensure that the correct client IP
    address is presented to this valve.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Crawler Session Manager Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.CrawlerSessionManagerValve</strong>.
        </p>
      </attribute>

      <attribute name="contextAware" required="false">
        <p>Flag to use the context name together with the client IP to
        identify the session to re-use. Can be combined with <code>hostAware</code>.
        Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="crawlerIps" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that client
        IP is matched against to determine if a request is from a web crawler.
        By default such regular expression is not set.</p>
      </attribute>

      <attribute name="crawlerUserAgents" required="false">
        <p>Regular expression (using <code>java.util.regex</code>) that the user
        agent HTTP request header is matched against to determine if a request
        is from a web crawler. If not set, the default of
        <code>.*[bB]ot.*|.*Yahoo! Slurp.*|.*Feedfetcher-Google.*</code> is used.</p>
      </attribute>

      <attribute name="hostAware" required="false">
        <p>Flag to use the configured host together with the client IP to
        identify the session to re-use. Can be combined with <code>contextAware</code>.
        Default value: <code>true</code>
        </p>
      </attribute>

      <attribute name="sessionInactiveInterval" required="false">
        <p>The minimum time in seconds that the Crawler Session Manager Valve
        should keep the mapping of client IP to session ID in memory without any
        activity from the client. The client IP / session cache will be
        periodically purged of mappings that have been inactive for longer than
        this interval. If not specified the default value of <code>60</code>
        will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Stuck Thread Detection Valve">

  <subsection name="Introduction">

    <p>This valve allows to detect requests that take a long time to process,
    which might indicate that the thread that is processing it is stuck.
    Additionally it can optionally interrupt such threads to try and unblock
    them.</p>
    <p>When such a request is detected, the current stack trace of its thread is
    written to Tomcat log with a WARN level.</p>
    <p>The IDs and names of the stuck threads are available through JMX in the
    <code>stuckThreadIds</code> and <code>stuckThreadNames</code> attributes.
    The IDs can be used with the standard Threading JVM MBean
    (<code>java.lang:type=Threading</code>) to retrieve other information
    about each stuck thread.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Stuck Thread Detection Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.StuckThreadDetectionValve</strong>.
        </p>
      </attribute>

      <attribute name="threshold" required="false">
        <p>Minimum duration in seconds after which a thread is considered stuck.
        Default is 600 seconds. If set to 0, the detection is disabled.</p>
        <p>Note: since the detection (and optional interruption) is done in the
        background thread of the Container (Engine, Host or Context) declaring
        this Valve, the threshold should be higher than the
        <code>backgroundProcessorDelay</code> of this Container.</p>
      </attribute>

      <attribute name="interruptThreadThreshold" required="false">
        <p>Minimum duration in seconds after which a stuck thread should be
        interrupted to attempt to "free" it.</p>
        <p>Note that there's no guarantee that the thread will get unstuck.
        This usually works well for threads stuck on I/O or locks, but is
        probably useless in case of infinite loops.</p>
        <p>Default is -1 which disables the feature. To enable it, the value
        must be greater or equal to <code>threshold</code>.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Semaphore Valve">

  <subsection name="Introduction">

    <p>The <strong>Semaphore Valve</strong> is able to limit the number of
    concurrent request processing threads.</p>
    <p><strong>org.apache.catalina.valves.SemaphoreValve</strong> provides
    methods which may be overridden by a subclass to customize behavior:</p>
    <ul>
    <li><b><code>controlConcurrency</code></b> may be overridden to add
    conditions;</li>
    <li><b><code>permitDenied</code></b> may be overridden to add error handling
    when a permit isn't granted.</li>
    </ul>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Semaphore Valve</strong> supports the following
    configuration attributes:</p>

    <attributes>

      <attribute name="block" required="false">
        <p>Flag to determine if a thread is blocked until a permit is available.
        The default value is <strong>true</strong>.</p>
      </attribute>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use. This MUST be set to
        <strong>org.apache.catalina.valves.SemaphoreValve</strong>.</p>
      </attribute>

      <attribute name="concurrency" required="false">
        <p>Concurrency level of the semaphore. The default value is
        <strong>10</strong>.</p>
      </attribute>

      <attribute name="fairness" required="false">
        <p>Fairness of the semaphore. The default value is
        <strong>false</strong>.</p>
      </attribute>

      <attribute name="interruptible" required="false">
        <p>Flag to determine if a thread may be interrupted until a permit is
        available. The default value is <strong>false</strong>.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Health Check Valve">

  <subsection name="Introduction">

    <p>The <strong>Health Check Valve</strong> responds to
    cloud orchestrators health checks.</p>
  </subsection>

  <subsection name="Attributes">

    <p>The <strong>Health Check Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.HealthCheckValve</strong>.</p>
      </attribute>

      <attribute name="path" required="false">
        <p>Path by the cloud orchestrators health check logic. If the valve
        is associated with a context, then this will be relative to the context
        path. Otherwise, the valve will match the full URI.
        The default value is <strong>/health</strong>.</p>
      </attribute>

      <attribute name="checkContainersAvailable" required="false">
        <p>If <code>true</code> the valve will check if its associated
        container and all its children are available.
        The default value is <strong>true</strong>.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

<section name="Persistent Valve">

  <subsection name="Introduction">

    <p>The <strong>PersistentValve</strong> that implements per-request session
    persistence. It is intended to be used with non-sticky load-balancers.</p>

  </subsection>

  <subsection name="Attributes">

    <p>The <strong>PersistentValve Valve</strong> supports the
    following configuration attributes:</p>

    <attributes>

      <attribute name="className" required="true">
        <p>Java class name of the implementation to use.  This MUST be set to
        <strong>org.apache.catalina.valves.PersistentValve</strong>.</p>
      </attribute>

      <attribute name="filter" required="false">
        <p>For known file extensions or urls, you can use this filter pattern to
        notify the valve that no session required during this request. If the
        request matches this filter pattern, the valve assumes there has been no
        need to restore session. An example filter would look like <code>
        filter=&quot;.*\.gif|.*\.js|.*\.jpeg|.*\.jpg|.*\.png|.*\.htm|.*\.html|.*\.css|.*\.txt&quot;</code>.
        The filter is a regular expression using
        <code>java.util.regex</code>.</p>
      </attribute>

      <attribute name="semaphoreAcquireUninterruptibly" required="false">
        <p>Flag to determine if a thread that blocks waiting for the per session
        Semaphore should do so uninterruptibly. Has no effect if
        <strong>semaphoreBlockOnAcquire</strong> is <code>false</code>. If not
        specified, the default value of <code>true</code> will be used.</p>
      </attribute>

      <attribute name="semaphoreBlockOnAcquire" required="false">
        <p>Flag to determine if a thread that wishes to acquire the per session
        Semaphore when it is held by another thread should block until it can
        acquire the Semaphore or if the waiting request be rejected. If not
        specified, the default value of <code>true</code> will be used.</p>
      </attribute>

      <attribute name="semaphoreFairness" required="false">
        <p>Flag to determine if the per session Semaphore will grant requests
        for the Semaphore in the same order they were received. Has no effect if
        <strong>semaphoreBlockOnAcquire</strong> is <code>false</code>. If not
        specified, the default value of <code>true</code> will be used.</p>
      </attribute>

    </attributes>

  </subsection>

</section>

</body>


</document>
