# Makefile.in generated by automake 1.18.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2025 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Copyright © 2003 Keith Packard, Noah Levitt
#
#  Permission to use, copy, modify, distribute, and sell this software and its
#  documentation for any purpose is hereby granted without fee, provided that
#  the above copyright notice appear in all copies and that both that
#  copyright notice and this permission notice appear in supporting
#  documentation, and that the name of Keith Packard not be used in
#  advertising or publicity pertaining to distribution of the software without
#  specific, written prior permission.  Keith Packard makes no
#  representations about the suitability of this software for any purpose.  It
#  is provided "as is" without express or implied warranty.
#
#  KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
#  EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
#  PERFORMANCE OF THIS SOFTWARE.




VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
@XFONT_FONTFILE_TRUE@am__append_1 = \
@XFONT_FONTFILE_TRUE@	src/fontfile/bitsource.c	\
@XFONT_FONTFILE_TRUE@	src/fontfile/bufio.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/decompress.c	\
@XFONT_FONTFILE_TRUE@	src/fontfile/defaults.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/dirfile.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/fileio.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/filewr.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/fontdir.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/fontfile.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/fontscale.c	\
@XFONT_FONTFILE_TRUE@	src/fontfile/gunzip.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/register.c		\
@XFONT_FONTFILE_TRUE@	src/fontfile/renderers.c	\
@XFONT_FONTFILE_TRUE@	src/fontfile/catalogue.c

@XFONT_FONTFILE_TRUE@@X_BZIP2_FONT_COMPRESSION_TRUE@am__append_2 = src/fontfile/bunzip2.c
@XFONT_FREETYPE_TRUE@am__append_3 = $(FREETYPE_CFLAGS)
@XFONT_FREETYPE_TRUE@am__append_4 = $(FREETYPE_LIBS)
@XFONT_FREETYPE_TRUE@am__append_5 = \
@XFONT_FREETYPE_TRUE@	src/FreeType/ft.h		\
@XFONT_FREETYPE_TRUE@	src/FreeType/ftfuncs.h		\
@XFONT_FREETYPE_TRUE@	src/FreeType/xttcap.h		\
@XFONT_FREETYPE_TRUE@	src/FreeType/ftenc.c		\
@XFONT_FREETYPE_TRUE@	src/FreeType/ftfuncs.c		\
@XFONT_FREETYPE_TRUE@	src/FreeType/fttools.c		\
@XFONT_FREETYPE_TRUE@	src/FreeType/xttcap.c

@XFONT_BITMAP_TRUE@am__append_6 = \
@XFONT_BITMAP_TRUE@	src/bitmap/bitmap.c		\
@XFONT_BITMAP_TRUE@	src/bitmap/bitmapfunc.c		\
@XFONT_BITMAP_TRUE@	src/bitmap/bitmaputil.c		\
@XFONT_BITMAP_TRUE@	src/bitmap/bitscale.c		\
@XFONT_BITMAP_TRUE@	src/bitmap/fontink.c

@XFONT_BDFFORMAT_TRUE@@XFONT_BITMAP_TRUE@am__append_7 = \
@XFONT_BDFFORMAT_TRUE@@XFONT_BITMAP_TRUE@	src/bitmap/bdfread.c		\
@XFONT_BDFFORMAT_TRUE@@XFONT_BITMAP_TRUE@	src/bitmap/bdfutils.c

@XFONT_BITMAP_TRUE@@XFONT_PCF_OR_BUILTIN_TRUE@am__append_8 = src/bitmap/pcfread.c
@XFONT_BITMAP_TRUE@@XFONT_PCFFORMAT_TRUE@am__append_9 = src/bitmap/pcfwrite.c
@XFONT_BITMAP_TRUE@@XFONT_SNFFORMAT_TRUE@am__append_10 = \
@XFONT_BITMAP_TRUE@@XFONT_SNFFORMAT_TRUE@	src/bitmap/snfread.c		\
@XFONT_BITMAP_TRUE@@XFONT_SNFFORMAT_TRUE@	src/bitmap/snfstr.h

@XFONT_BUILTINS_TRUE@am__append_11 = \
@XFONT_BUILTINS_TRUE@	src/builtins/builtin.h		\
@XFONT_BUILTINS_TRUE@	src/builtins/dir.c		\
@XFONT_BUILTINS_TRUE@	src/builtins/file.c		\
@XFONT_BUILTINS_TRUE@	src/builtins/fonts.c		\
@XFONT_BUILTINS_TRUE@	src/builtins/fpe.c		\
@XFONT_BUILTINS_TRUE@	src/builtins/render.c

@XFONT_FC_TRUE@am__append_12 = \
@XFONT_FC_TRUE@	src/fc/fsconvert.c		\
@XFONT_FC_TRUE@	src/fc/fserve.c			\
@XFONT_FC_TRUE@	src/fc/fserve.h			\
@XFONT_FC_TRUE@	src/fc/fservestr.h		\
@XFONT_FC_TRUE@	src/fc/fsio.c			\
@XFONT_FC_TRUE@	src/fc/fsio.h			\
@XFONT_FC_TRUE@	src/fc/fslibos.h		\
@XFONT_FC_TRUE@	src/fc/fstrans.c

noinst_PROGRAMS = lsfontdir$(EXEEXT)
@HAVE_PYTHON_TRUE@TESTS = test-pcf-repad$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-props$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-bitmapscale$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-encoding$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-norepad$(EXEEXT)
@HAVE_PYTHON_TRUE@check_PROGRAMS = test-pcf-repad$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-props$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-bitmapscale$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-encoding$(EXEEXT) \
@HAVE_PYTHON_TRUE@	test-pcf-norepad$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(libXfontinclude_HEADERS) \
	$(noinst_HEADERS) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = xfont2.pc
CONFIG_CLEAN_VPATH_FILES =
PROGRAMS = $(noinst_PROGRAMS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
  }
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \
	"$(DESTDIR)$(libXfontincludedir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 =
LIBOBJDIR = src/util/
am__dirstamp = $(am__leading_dot)dirstamp
@XFONT_FREETYPE_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
libXfont2_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
	$(am__DEPENDENCIES_1) $(LTLIBOBJS) $(am__DEPENDENCIES_2)
am__libXfont2_la_SOURCES_DIST = src/stubs/atom.c \
	src/stubs/libxfontstubs.c src/util/fontaccel.c \
	src/util/fontnames.c src/util/fontutil.c src/util/fontxlfd.c \
	src/util/format.c src/util/miscutil.c src/util/patcache.c \
	src/util/private.c src/util/utilbitmap.c \
	src/fontfile/bitsource.c src/fontfile/bufio.c \
	src/fontfile/decompress.c src/fontfile/defaults.c \
	src/fontfile/dirfile.c src/fontfile/fileio.c \
	src/fontfile/filewr.c src/fontfile/fontdir.c \
	src/fontfile/fontfile.c src/fontfile/fontscale.c \
	src/fontfile/gunzip.c src/fontfile/register.c \
	src/fontfile/renderers.c src/fontfile/catalogue.c \
	src/fontfile/bunzip2.c src/FreeType/ft.h \
	src/FreeType/ftfuncs.h src/FreeType/xttcap.h \
	src/FreeType/ftenc.c src/FreeType/ftfuncs.c \
	src/FreeType/fttools.c src/FreeType/xttcap.c \
	src/bitmap/bitmap.c src/bitmap/bitmapfunc.c \
	src/bitmap/bitmaputil.c src/bitmap/bitscale.c \
	src/bitmap/fontink.c src/bitmap/bdfread.c \
	src/bitmap/bdfutils.c src/bitmap/pcfread.c \
	src/bitmap/pcfwrite.c src/bitmap/snfread.c src/bitmap/snfstr.h \
	src/builtins/builtin.h src/builtins/dir.c src/builtins/file.c \
	src/builtins/fonts.c src/builtins/fpe.c src/builtins/render.c \
	src/fc/fsconvert.c src/fc/fserve.c src/fc/fserve.h \
	src/fc/fservestr.h src/fc/fsio.c src/fc/fsio.h \
	src/fc/fslibos.h src/fc/fstrans.c
@XFONT_FONTFILE_TRUE@am__objects_1 = src/fontfile/bitsource.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/bufio.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/decompress.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/defaults.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/dirfile.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/fileio.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/filewr.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/fontdir.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/fontfile.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/fontscale.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/gunzip.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/register.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/renderers.lo \
@XFONT_FONTFILE_TRUE@	src/fontfile/catalogue.lo
@XFONT_FONTFILE_TRUE@@X_BZIP2_FONT_COMPRESSION_TRUE@am__objects_2 = src/fontfile/bunzip2.lo
@XFONT_FREETYPE_TRUE@am__objects_3 = src/FreeType/ftenc.lo \
@XFONT_FREETYPE_TRUE@	src/FreeType/ftfuncs.lo \
@XFONT_FREETYPE_TRUE@	src/FreeType/fttools.lo \
@XFONT_FREETYPE_TRUE@	src/FreeType/xttcap.lo
@XFONT_BITMAP_TRUE@am__objects_4 = src/bitmap/bitmap.lo \
@XFONT_BITMAP_TRUE@	src/bitmap/bitmapfunc.lo \
@XFONT_BITMAP_TRUE@	src/bitmap/bitmaputil.lo \
@XFONT_BITMAP_TRUE@	src/bitmap/bitscale.lo \
@XFONT_BITMAP_TRUE@	src/bitmap/fontink.lo
@XFONT_BDFFORMAT_TRUE@@XFONT_BITMAP_TRUE@am__objects_5 = src/bitmap/bdfread.lo \
@XFONT_BDFFORMAT_TRUE@@XFONT_BITMAP_TRUE@	src/bitmap/bdfutils.lo
@XFONT_BITMAP_TRUE@@XFONT_PCF_OR_BUILTIN_TRUE@am__objects_6 = src/bitmap/pcfread.lo
@XFONT_BITMAP_TRUE@@XFONT_PCFFORMAT_TRUE@am__objects_7 = src/bitmap/pcfwrite.lo
@XFONT_BITMAP_TRUE@@XFONT_SNFFORMAT_TRUE@am__objects_8 = src/bitmap/snfread.lo
@XFONT_BUILTINS_TRUE@am__objects_9 = src/builtins/dir.lo \
@XFONT_BUILTINS_TRUE@	src/builtins/file.lo \
@XFONT_BUILTINS_TRUE@	src/builtins/fonts.lo src/builtins/fpe.lo \
@XFONT_BUILTINS_TRUE@	src/builtins/render.lo
@XFONT_FC_TRUE@am__objects_10 = src/fc/fsconvert.lo src/fc/fserve.lo \
@XFONT_FC_TRUE@	src/fc/fsio.lo src/fc/fstrans.lo
am_libXfont2_la_OBJECTS = src/stubs/atom.lo src/stubs/libxfontstubs.lo \
	src/util/fontaccel.lo src/util/fontnames.lo \
	src/util/fontutil.lo src/util/fontxlfd.lo src/util/format.lo \
	src/util/miscutil.lo src/util/patcache.lo src/util/private.lo \
	src/util/utilbitmap.lo $(am__objects_1) $(am__objects_2) \
	$(am__objects_3) $(am__objects_4) $(am__objects_5) \
	$(am__objects_6) $(am__objects_7) $(am__objects_8) \
	$(am__objects_9) $(am__objects_10)
libXfont2_la_OBJECTS = $(am_libXfont2_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 = 
libXfont2_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(libXfont2_la_LDFLAGS) $(LDFLAGS) -o $@
am__objects_11 = test/utils/font-test-utils.$(OBJEXT)
am_lsfontdir_OBJECTS = test/utils/lsfontdir.$(OBJEXT) \
	$(am__objects_11)
lsfontdir_OBJECTS = $(am_lsfontdir_OBJECTS)
lsfontdir_DEPENDENCIES = libXfont2.la $(LTLIBOBJS)
am__test_pcf_bitmapscale_SOURCES_DIST = test/test-pcf-bitmapscale.c \
	test/pcf-test-common.c test/pcf-test-common.h \
	test/utils/font-test-utils.c test/utils/font-test-utils.h
@HAVE_PYTHON_TRUE@am__objects_12 = test/pcf-test-common.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_11)
@HAVE_PYTHON_TRUE@am_test_pcf_bitmapscale_OBJECTS =  \
@HAVE_PYTHON_TRUE@	test/test-pcf-bitmapscale.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_12)
test_pcf_bitmapscale_OBJECTS = $(am_test_pcf_bitmapscale_OBJECTS)
@HAVE_PYTHON_TRUE@test_pcf_bitmapscale_DEPENDENCIES =  \
@HAVE_PYTHON_TRUE@	$(PCF_TEST_LDADD)
am__test_pcf_encoding_SOURCES_DIST = test/test-pcf-encoding.c \
	test/pcf-test-common.c test/pcf-test-common.h \
	test/utils/font-test-utils.c test/utils/font-test-utils.h
@HAVE_PYTHON_TRUE@am_test_pcf_encoding_OBJECTS =  \
@HAVE_PYTHON_TRUE@	test/test-pcf-encoding.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_12)
test_pcf_encoding_OBJECTS = $(am_test_pcf_encoding_OBJECTS)
@HAVE_PYTHON_TRUE@test_pcf_encoding_DEPENDENCIES = $(PCF_TEST_LDADD)
am__test_pcf_norepad_SOURCES_DIST = test/test-pcf-norepad.c \
	test/pcf-test-common.c test/pcf-test-common.h \
	test/utils/font-test-utils.c test/utils/font-test-utils.h
@HAVE_PYTHON_TRUE@am_test_pcf_norepad_OBJECTS =  \
@HAVE_PYTHON_TRUE@	test/test-pcf-norepad.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_12)
test_pcf_norepad_OBJECTS = $(am_test_pcf_norepad_OBJECTS)
@HAVE_PYTHON_TRUE@test_pcf_norepad_DEPENDENCIES = $(PCF_TEST_LDADD)
am__test_pcf_props_SOURCES_DIST = test/test-pcf-props.c \
	test/pcf-test-common.c test/pcf-test-common.h \
	test/utils/font-test-utils.c test/utils/font-test-utils.h
@HAVE_PYTHON_TRUE@am_test_pcf_props_OBJECTS =  \
@HAVE_PYTHON_TRUE@	test/test-pcf-props.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_12)
test_pcf_props_OBJECTS = $(am_test_pcf_props_OBJECTS)
@HAVE_PYTHON_TRUE@test_pcf_props_DEPENDENCIES = $(PCF_TEST_LDADD)
am__test_pcf_repad_SOURCES_DIST = test/test-pcf-repad.c \
	test/pcf-test-common.c test/pcf-test-common.h \
	test/utils/font-test-utils.c test/utils/font-test-utils.h
@HAVE_PYTHON_TRUE@am_test_pcf_repad_OBJECTS =  \
@HAVE_PYTHON_TRUE@	test/test-pcf-repad.$(OBJEXT) \
@HAVE_PYTHON_TRUE@	$(am__objects_12)
test_pcf_repad_OBJECTS = $(am_test_pcf_repad_OBJECTS)
@HAVE_PYTHON_TRUE@test_pcf_repad_DEPENDENCIES = $(PCF_TEST_LDADD)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = src/FreeType/$(DEPDIR)/ftenc.Plo \
	src/FreeType/$(DEPDIR)/ftfuncs.Plo \
	src/FreeType/$(DEPDIR)/fttools.Plo \
	src/FreeType/$(DEPDIR)/xttcap.Plo \
	src/bitmap/$(DEPDIR)/bdfread.Plo \
	src/bitmap/$(DEPDIR)/bdfutils.Plo \
	src/bitmap/$(DEPDIR)/bitmap.Plo \
	src/bitmap/$(DEPDIR)/bitmapfunc.Plo \
	src/bitmap/$(DEPDIR)/bitmaputil.Plo \
	src/bitmap/$(DEPDIR)/bitscale.Plo \
	src/bitmap/$(DEPDIR)/fontink.Plo \
	src/bitmap/$(DEPDIR)/pcfread.Plo \
	src/bitmap/$(DEPDIR)/pcfwrite.Plo \
	src/bitmap/$(DEPDIR)/snfread.Plo \
	src/builtins/$(DEPDIR)/dir.Plo src/builtins/$(DEPDIR)/file.Plo \
	src/builtins/$(DEPDIR)/fonts.Plo \
	src/builtins/$(DEPDIR)/fpe.Plo \
	src/builtins/$(DEPDIR)/render.Plo \
	src/fc/$(DEPDIR)/fsconvert.Plo src/fc/$(DEPDIR)/fserve.Plo \
	src/fc/$(DEPDIR)/fsio.Plo src/fc/$(DEPDIR)/fstrans.Plo \
	src/fontfile/$(DEPDIR)/bitsource.Plo \
	src/fontfile/$(DEPDIR)/bufio.Plo \
	src/fontfile/$(DEPDIR)/bunzip2.Plo \
	src/fontfile/$(DEPDIR)/catalogue.Plo \
	src/fontfile/$(DEPDIR)/decompress.Plo \
	src/fontfile/$(DEPDIR)/defaults.Plo \
	src/fontfile/$(DEPDIR)/dirfile.Plo \
	src/fontfile/$(DEPDIR)/fileio.Plo \
	src/fontfile/$(DEPDIR)/filewr.Plo \
	src/fontfile/$(DEPDIR)/fontdir.Plo \
	src/fontfile/$(DEPDIR)/fontfile.Plo \
	src/fontfile/$(DEPDIR)/fontscale.Plo \
	src/fontfile/$(DEPDIR)/gunzip.Plo \
	src/fontfile/$(DEPDIR)/register.Plo \
	src/fontfile/$(DEPDIR)/renderers.Plo \
	src/stubs/$(DEPDIR)/atom.Plo \
	src/stubs/$(DEPDIR)/libxfontstubs.Plo \
	src/util/$(DEPDIR)/fontaccel.Plo \
	src/util/$(DEPDIR)/fontnames.Plo \
	src/util/$(DEPDIR)/fontutil.Plo \
	src/util/$(DEPDIR)/fontxlfd.Plo src/util/$(DEPDIR)/format.Plo \
	src/util/$(DEPDIR)/miscutil.Plo \
	src/util/$(DEPDIR)/patcache.Plo src/util/$(DEPDIR)/private.Plo \
	src/util/$(DEPDIR)/reallocarray.Plo \
	src/util/$(DEPDIR)/realpath.Plo src/util/$(DEPDIR)/strlcat.Plo \
	src/util/$(DEPDIR)/strlcpy.Plo \
	src/util/$(DEPDIR)/utilbitmap.Plo \
	test/$(DEPDIR)/pcf-test-common.Po \
	test/$(DEPDIR)/test-pcf-bitmapscale.Po \
	test/$(DEPDIR)/test-pcf-encoding.Po \
	test/$(DEPDIR)/test-pcf-norepad.Po \
	test/$(DEPDIR)/test-pcf-props.Po \
	test/$(DEPDIR)/test-pcf-repad.Po \
	test/utils/$(DEPDIR)/font-test-utils.Po \
	test/utils/$(DEPDIR)/lsfontdir.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
	$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
SOURCES = $(libXfont2_la_SOURCES) $(lsfontdir_SOURCES) \
	$(test_pcf_bitmapscale_SOURCES) $(test_pcf_encoding_SOURCES) \
	$(test_pcf_norepad_SOURCES) $(test_pcf_props_SOURCES) \
	$(test_pcf_repad_SOURCES)
DIST_SOURCES = $(am__libXfont2_la_SOURCES_DIST) $(lsfontdir_SOURCES) \
	$(am__test_pcf_bitmapscale_SOURCES_DIST) \
	$(am__test_pcf_encoding_SOURCES_DIST) \
	$(am__test_pcf_norepad_SOURCES_DIST) \
	$(am__test_pcf_props_SOURCES_DIST) \
	$(am__test_pcf_repad_SOURCES_DIST)
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(pkgconfig_DATA)
HEADERS = $(libXfontinclude_HEADERS) $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope check recheck distdir distdir-am dist dist-all \
	distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  $$am__collect_skipped_logs \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer-defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(IGNORE_SKIPPED_LOGS)'; then		\
  am__collect_skipped_logs='--collect-skipped-logs no';	\
else							\
  am__collect_skipped_logs='';				\
fi;							\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
	$(srcdir)/xfont2.pc.in $(top_srcdir)/src/util/reallocarray.c \
	$(top_srcdir)/src/util/realpath.c \
	$(top_srcdir)/src/util/strlcat.c \
	$(top_srcdir)/src/util/strlcpy.c AUTHORS COPYING ChangeLog \
	INSTALL README.md compile config.guess config.sub depcomp \
	install-sh ltmain.sh missing test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
      ; rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
GZIP_ENV = -9
DIST_TARGETS = dist-xz dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = \
  find . \( -type f -a \! \
            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASE_CFLAGS = @BASE_CFLAGS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CHANGELOG_CMD = @CHANGELOG_CMD@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CWARNFLAGS = @CWARNFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
FOP = @FOP@
FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
FREETYPE_LIBS = @FREETYPE_LIBS@
FREETYPE_REQUIRES = @FREETYPE_REQUIRES@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_CMD = @INSTALL_CMD@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBSD_CFLAGS = @LIBBSD_CFLAGS@
LIBBSD_LIBS = @LIBBSD_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_MAN_DIR = @LIB_MAN_DIR@
LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MAN_SUBSTS = @MAN_SUBSTS@
MATH_LIBS = @MATH_LIBS@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OS_CFLAGS = @OS_CFLAGS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRICT_CFLAGS = @STRICT_CFLAGS@
STRIP = @STRIP@
STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
VERSION = @VERSION@
XFONT_CFLAGS = @XFONT_CFLAGS@
XFONT_LIBS = @XFONT_LIBS@
XMLTO = @XMLTO@
XORG_MAN_PAGE = @XORG_MAN_PAGE@
XORG_SGML_PATH = @XORG_SGML_PATH@
XSL_STYLESHEET = @XSL_STYLESHEET@
X_GZIP_FONT_COMPRESSION = @X_GZIP_FONT_COMPRESSION@
ZLIB_CFLAGS = @ZLIB_CFLAGS@
ZLIB_LIBS = @ZLIB_LIBS@
Z_LIBS = @Z_LIBS@
Z_REQUIRES = @Z_REQUIRES@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
ft_config = @ft_config@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = doc
libXfontincludedir = $(includedir)/X11/fonts
libXfontinclude_HEADERS = \
	include/X11/fonts/libxfont2.h

noinst_HEADERS = \
	include/X11/fonts/bdfint.h   \
	include/X11/fonts/bitmap.h   \
	include/X11/fonts/bufio.h    \
	include/X11/fonts/fntfil.h   \
	include/X11/fonts/fntfilio.h \
	include/X11/fonts/fntfilst.h \
	include/X11/fonts/fontmisc.h \
	include/X11/fonts/fontshow.h \
	include/X11/fonts/fontutil.h \
	include/X11/fonts/fontxlfd.h \
	include/X11/fonts/pcf.h      \
	include/libxfontint.h        \
	src/FreeType/ft.h	     \
	src/FreeType/ftfuncs.h       \
	src/util/replace.h

pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = xfont2.pc
lib_LTLIBRARIES = libXfont2.la
AM_CPPFLAGS = -I${top_srcdir}/include
AM_CFLAGS = $(XFONT_CFLAGS) $(OS_CFLAGS) $(CWARNFLAGS) $(am__append_3)
libXfont2_la_SOURCES = src/stubs/atom.c src/stubs/libxfontstubs.c \
	src/util/fontaccel.c src/util/fontnames.c src/util/fontutil.c \
	src/util/fontxlfd.c src/util/format.c src/util/miscutil.c \
	src/util/patcache.c src/util/private.c src/util/utilbitmap.c \
	$(am__append_1) $(am__append_2) $(am__append_5) \
	$(am__append_6) $(am__append_7) $(am__append_8) \
	$(am__append_9) $(am__append_10) $(am__append_11) \
	$(am__append_12)
libXfont2_la_LDFLAGS = -version-number 2:0:0 -no-undefined
libXfont2_la_LIBADD = $(ZLIB_LIBS) $(Z_LIBS) $(MATH_LIBS) \
	$(XFONT_LIBS) $(LTLIBOBJS) $(am__append_4)

# Test utilities
EXTRA_DIST = src/builtins/buildfont README.md test/utils/README \
	test/gen_evil_pcf_repad.py test/gen_evil_pcf_props.py \
	test/gen_evil_pcf_bitmapscale.py test/gen_evil_pcf_encoding.py \
	test/gen_evil_pcf_norepad.py
TEST_UTIL_SRCS = test/utils/font-test-utils.c test/utils/font-test-utils.h
lsfontdir_SOURCES = test/utils/lsfontdir.c $(TEST_UTIL_SRCS)
lsfontdir_LDADD = libXfont2.la $(LTLIBOBJS)
@HAVE_PYTHON_TRUE@PCF_TEST_SRCS = test/pcf-test-common.c test/pcf-test-common.h $(TEST_UTIL_SRCS)
@HAVE_PYTHON_TRUE@PCF_TEST_LDADD = libXfont2.la $(LTLIBOBJS)
@HAVE_PYTHON_TRUE@test_pcf_repad_SOURCES = test/test-pcf-repad.c $(PCF_TEST_SRCS)
@HAVE_PYTHON_TRUE@test_pcf_repad_LDADD = $(PCF_TEST_LDADD)
@HAVE_PYTHON_TRUE@test_pcf_props_SOURCES = test/test-pcf-props.c $(PCF_TEST_SRCS)
@HAVE_PYTHON_TRUE@test_pcf_props_LDADD = $(PCF_TEST_LDADD)
@HAVE_PYTHON_TRUE@test_pcf_bitmapscale_SOURCES = test/test-pcf-bitmapscale.c $(PCF_TEST_SRCS)
@HAVE_PYTHON_TRUE@test_pcf_bitmapscale_LDADD = $(PCF_TEST_LDADD)
@HAVE_PYTHON_TRUE@test_pcf_encoding_SOURCES = test/test-pcf-encoding.c $(PCF_TEST_SRCS)
@HAVE_PYTHON_TRUE@test_pcf_encoding_LDADD = $(PCF_TEST_LDADD)
@HAVE_PYTHON_TRUE@test_pcf_norepad_SOURCES = test/test-pcf-norepad.c $(PCF_TEST_SRCS)
@HAVE_PYTHON_TRUE@test_pcf_norepad_LDADD = $(PCF_TEST_LDADD)

# Generate malicious PCF test fonts from Python scripts at build time.
# Each script creates a .pcf and fonts.dir in its output directory.
@HAVE_PYTHON_TRUE@TEST_FONT_DIRS = test/data/repad test/data/props test/data/scale \
@HAVE_PYTHON_TRUE@		 test/data/encoding \
@HAVE_PYTHON_TRUE@		 test/data/norepad

@HAVE_PYTHON_TRUE@TEST_FONT_FILES = test/data/repad/evil-repad.pcf	\
@HAVE_PYTHON_TRUE@		  test/data/props/evil-props.pcf	\
@HAVE_PYTHON_TRUE@		  test/data/scale/evil-scale.pcf	\
@HAVE_PYTHON_TRUE@		  test/data/encoding/evil-encoding.pcf	\
@HAVE_PYTHON_TRUE@		  test/data/norepad/evil-norepad.pcf


# Font data must be generated before the tests run
@HAVE_PYTHON_TRUE@check_DATA = $(TEST_FONT_FILES)
@HAVE_PYTHON_TRUE@CLEANFILES = $(TEST_FONT_FILES)			\
@HAVE_PYTHON_TRUE@	     test/data/repad/fonts.dir		\
@HAVE_PYTHON_TRUE@	     test/data/props/fonts.dir		\
@HAVE_PYTHON_TRUE@	     test/data/scale/fonts.dir		\
@HAVE_PYTHON_TRUE@	     test/data/scale/fonts.scale	\
@HAVE_PYTHON_TRUE@	     test/data/encoding/fonts.dir	\
@HAVE_PYTHON_TRUE@	     test/data/norepad/fonts.dir

MAINTAINERCLEANFILES = ChangeLog INSTALL
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	$(AM_V_at)rm -f stamp-h1
	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps) 
	$(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	$(AM_V_at)rm -f stamp-h1
	$(AM_V_at)touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
xfont2.pc: $(top_builddir)/config.status $(srcdir)/xfont2.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

clean-checkPROGRAMS:
	$(am__rm_f) $(check_PROGRAMS)
	test -z "$(EXEEXT)" || $(am__rm_f) $(check_PROGRAMS:$(EXEEXT)=)

clean-noinstPROGRAMS:
	$(am__rm_f) $(noinst_PROGRAMS)
	test -z "$(EXEEXT)" || $(am__rm_f) $(noinst_PROGRAMS:$(EXEEXT)=)

install-libLTLIBRARIES: $(lib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
	}

uninstall-libLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
	done

clean-libLTLIBRARIES:
	-$(am__rm_f) $(lib_LTLIBRARIES)
	@list='$(lib_LTLIBRARIES)'; \
	locs=`for p in $$list; do echo $$p; done | \
	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
	      sort -u`; \
	echo rm -f $${locs}; \
	$(am__rm_f) $${locs}
src/util/$(am__dirstamp):
	@$(MKDIR_P) src/util/
	@: >>src/util/$(am__dirstamp)
src/util/reallocarray.$(OBJEXT): src/util/$(am__dirstamp)
src/util/reallocarray.lo: src/util/$(am__dirstamp)
src/util/realpath.$(OBJEXT): src/util/$(am__dirstamp)
src/util/realpath.lo: src/util/$(am__dirstamp)
src/util/strlcat.$(OBJEXT): src/util/$(am__dirstamp)
src/util/strlcat.lo: src/util/$(am__dirstamp)
src/util/strlcpy.$(OBJEXT): src/util/$(am__dirstamp)
src/util/strlcpy.lo: src/util/$(am__dirstamp)
src/stubs/$(am__dirstamp):
	@$(MKDIR_P) src/stubs
	@: >>src/stubs/$(am__dirstamp)
src/stubs/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/stubs/$(DEPDIR)
	@: >>src/stubs/$(DEPDIR)/$(am__dirstamp)
src/stubs/atom.lo: src/stubs/$(am__dirstamp) \
	src/stubs/$(DEPDIR)/$(am__dirstamp)
src/stubs/libxfontstubs.lo: src/stubs/$(am__dirstamp) \
	src/stubs/$(DEPDIR)/$(am__dirstamp)
src/util/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/util/$(DEPDIR)
	@: >>src/util/$(DEPDIR)/$(am__dirstamp)
src/util/fontaccel.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/fontnames.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/fontutil.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/fontxlfd.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/format.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/miscutil.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/patcache.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/private.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/util/utilbitmap.lo: src/util/$(am__dirstamp) \
	src/util/$(DEPDIR)/$(am__dirstamp)
src/fontfile/$(am__dirstamp):
	@$(MKDIR_P) src/fontfile
	@: >>src/fontfile/$(am__dirstamp)
src/fontfile/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/fontfile/$(DEPDIR)
	@: >>src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/bitsource.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/bufio.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/decompress.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/defaults.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/dirfile.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/fileio.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/filewr.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/fontdir.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/fontfile.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/fontscale.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/gunzip.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/register.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/renderers.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/catalogue.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/fontfile/bunzip2.lo: src/fontfile/$(am__dirstamp) \
	src/fontfile/$(DEPDIR)/$(am__dirstamp)
src/FreeType/$(am__dirstamp):
	@$(MKDIR_P) src/FreeType
	@: >>src/FreeType/$(am__dirstamp)
src/FreeType/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/FreeType/$(DEPDIR)
	@: >>src/FreeType/$(DEPDIR)/$(am__dirstamp)
src/FreeType/ftenc.lo: src/FreeType/$(am__dirstamp) \
	src/FreeType/$(DEPDIR)/$(am__dirstamp)
src/FreeType/ftfuncs.lo: src/FreeType/$(am__dirstamp) \
	src/FreeType/$(DEPDIR)/$(am__dirstamp)
src/FreeType/fttools.lo: src/FreeType/$(am__dirstamp) \
	src/FreeType/$(DEPDIR)/$(am__dirstamp)
src/FreeType/xttcap.lo: src/FreeType/$(am__dirstamp) \
	src/FreeType/$(DEPDIR)/$(am__dirstamp)
src/bitmap/$(am__dirstamp):
	@$(MKDIR_P) src/bitmap
	@: >>src/bitmap/$(am__dirstamp)
src/bitmap/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/bitmap/$(DEPDIR)
	@: >>src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bitmap.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bitmapfunc.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bitmaputil.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bitscale.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/fontink.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bdfread.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/bdfutils.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/pcfread.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/pcfwrite.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/bitmap/snfread.lo: src/bitmap/$(am__dirstamp) \
	src/bitmap/$(DEPDIR)/$(am__dirstamp)
src/builtins/$(am__dirstamp):
	@$(MKDIR_P) src/builtins
	@: >>src/builtins/$(am__dirstamp)
src/builtins/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/builtins/$(DEPDIR)
	@: >>src/builtins/$(DEPDIR)/$(am__dirstamp)
src/builtins/dir.lo: src/builtins/$(am__dirstamp) \
	src/builtins/$(DEPDIR)/$(am__dirstamp)
src/builtins/file.lo: src/builtins/$(am__dirstamp) \
	src/builtins/$(DEPDIR)/$(am__dirstamp)
src/builtins/fonts.lo: src/builtins/$(am__dirstamp) \
	src/builtins/$(DEPDIR)/$(am__dirstamp)
src/builtins/fpe.lo: src/builtins/$(am__dirstamp) \
	src/builtins/$(DEPDIR)/$(am__dirstamp)
src/builtins/render.lo: src/builtins/$(am__dirstamp) \
	src/builtins/$(DEPDIR)/$(am__dirstamp)
src/fc/$(am__dirstamp):
	@$(MKDIR_P) src/fc
	@: >>src/fc/$(am__dirstamp)
src/fc/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) src/fc/$(DEPDIR)
	@: >>src/fc/$(DEPDIR)/$(am__dirstamp)
src/fc/fsconvert.lo: src/fc/$(am__dirstamp) \
	src/fc/$(DEPDIR)/$(am__dirstamp)
src/fc/fserve.lo: src/fc/$(am__dirstamp) \
	src/fc/$(DEPDIR)/$(am__dirstamp)
src/fc/fsio.lo: src/fc/$(am__dirstamp) \
	src/fc/$(DEPDIR)/$(am__dirstamp)
src/fc/fstrans.lo: src/fc/$(am__dirstamp) \
	src/fc/$(DEPDIR)/$(am__dirstamp)

libXfont2.la: $(libXfont2_la_OBJECTS) $(libXfont2_la_DEPENDENCIES) $(EXTRA_libXfont2_la_DEPENDENCIES) 
	$(AM_V_CCLD)$(libXfont2_la_LINK) -rpath $(libdir) $(libXfont2_la_OBJECTS) $(libXfont2_la_LIBADD) $(LIBS)
test/utils/$(am__dirstamp):
	@$(MKDIR_P) test/utils
	@: >>test/utils/$(am__dirstamp)
test/utils/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) test/utils/$(DEPDIR)
	@: >>test/utils/$(DEPDIR)/$(am__dirstamp)
test/utils/lsfontdir.$(OBJEXT): test/utils/$(am__dirstamp) \
	test/utils/$(DEPDIR)/$(am__dirstamp)
test/utils/font-test-utils.$(OBJEXT): test/utils/$(am__dirstamp) \
	test/utils/$(DEPDIR)/$(am__dirstamp)

lsfontdir$(EXEEXT): $(lsfontdir_OBJECTS) $(lsfontdir_DEPENDENCIES) $(EXTRA_lsfontdir_DEPENDENCIES) 
	@rm -f lsfontdir$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(lsfontdir_OBJECTS) $(lsfontdir_LDADD) $(LIBS)
test/$(am__dirstamp):
	@$(MKDIR_P) test
	@: >>test/$(am__dirstamp)
test/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) test/$(DEPDIR)
	@: >>test/$(DEPDIR)/$(am__dirstamp)
test/test-pcf-bitmapscale.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)
test/pcf-test-common.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)

test-pcf-bitmapscale$(EXEEXT): $(test_pcf_bitmapscale_OBJECTS) $(test_pcf_bitmapscale_DEPENDENCIES) $(EXTRA_test_pcf_bitmapscale_DEPENDENCIES) 
	@rm -f test-pcf-bitmapscale$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_pcf_bitmapscale_OBJECTS) $(test_pcf_bitmapscale_LDADD) $(LIBS)
test/test-pcf-encoding.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)

test-pcf-encoding$(EXEEXT): $(test_pcf_encoding_OBJECTS) $(test_pcf_encoding_DEPENDENCIES) $(EXTRA_test_pcf_encoding_DEPENDENCIES) 
	@rm -f test-pcf-encoding$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_pcf_encoding_OBJECTS) $(test_pcf_encoding_LDADD) $(LIBS)
test/test-pcf-norepad.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)

test-pcf-norepad$(EXEEXT): $(test_pcf_norepad_OBJECTS) $(test_pcf_norepad_DEPENDENCIES) $(EXTRA_test_pcf_norepad_DEPENDENCIES) 
	@rm -f test-pcf-norepad$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_pcf_norepad_OBJECTS) $(test_pcf_norepad_LDADD) $(LIBS)
test/test-pcf-props.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)

test-pcf-props$(EXEEXT): $(test_pcf_props_OBJECTS) $(test_pcf_props_DEPENDENCIES) $(EXTRA_test_pcf_props_DEPENDENCIES) 
	@rm -f test-pcf-props$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_pcf_props_OBJECTS) $(test_pcf_props_LDADD) $(LIBS)
test/test-pcf-repad.$(OBJEXT): test/$(am__dirstamp) \
	test/$(DEPDIR)/$(am__dirstamp)

test-pcf-repad$(EXEEXT): $(test_pcf_repad_OBJECTS) $(test_pcf_repad_DEPENDENCIES) $(EXTRA_test_pcf_repad_DEPENDENCIES) 
	@rm -f test-pcf-repad$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(test_pcf_repad_OBJECTS) $(test_pcf_repad_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f src/FreeType/*.$(OBJEXT)
	-rm -f src/FreeType/*.lo
	-rm -f src/bitmap/*.$(OBJEXT)
	-rm -f src/bitmap/*.lo
	-rm -f src/builtins/*.$(OBJEXT)
	-rm -f src/builtins/*.lo
	-rm -f src/fc/*.$(OBJEXT)
	-rm -f src/fc/*.lo
	-rm -f src/fontfile/*.$(OBJEXT)
	-rm -f src/fontfile/*.lo
	-rm -f src/stubs/*.$(OBJEXT)
	-rm -f src/stubs/*.lo
	-rm -f src/util/*.$(OBJEXT)
	-rm -f src/util/*.lo
	-rm -f test/*.$(OBJEXT)
	-rm -f test/utils/*.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@src/FreeType/$(DEPDIR)/ftenc.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/FreeType/$(DEPDIR)/ftfuncs.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/FreeType/$(DEPDIR)/fttools.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/FreeType/$(DEPDIR)/xttcap.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bdfread.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bdfutils.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bitmap.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bitmapfunc.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bitmaputil.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/bitscale.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/fontink.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/pcfread.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/pcfwrite.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/bitmap/$(DEPDIR)/snfread.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/builtins/$(DEPDIR)/dir.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/builtins/$(DEPDIR)/file.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/builtins/$(DEPDIR)/fonts.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/builtins/$(DEPDIR)/fpe.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/builtins/$(DEPDIR)/render.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fc/$(DEPDIR)/fsconvert.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fc/$(DEPDIR)/fserve.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fc/$(DEPDIR)/fsio.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fc/$(DEPDIR)/fstrans.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/bitsource.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/bufio.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/bunzip2.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/catalogue.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/decompress.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/defaults.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/dirfile.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/fileio.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/filewr.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/fontdir.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/fontfile.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/fontscale.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/gunzip.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/register.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/fontfile/$(DEPDIR)/renderers.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/stubs/$(DEPDIR)/atom.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/stubs/$(DEPDIR)/libxfontstubs.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/fontaccel.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/fontnames.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/fontutil.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/fontxlfd.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/format.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/miscutil.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/patcache.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/private.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/reallocarray.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/realpath.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/strlcat.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/strlcpy.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@src/util/$(DEPDIR)/utilbitmap.Plo@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/pcf-test-common.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test-pcf-bitmapscale.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test-pcf-encoding.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test-pcf-norepad.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test-pcf-props.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test-pcf-repad.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/utils/$(DEPDIR)/font-test-utils.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@test/utils/$(DEPDIR)/lsfontdir.Po@am__quote@ # am--include-marker

$(am__depfiles_remade):
	@$(MKDIR_P) $(@D)
	@: >>$@

am--depfiles: $(am__depfiles_remade)

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
	-rm -rf src/FreeType/.libs src/FreeType/_libs
	-rm -rf src/bitmap/.libs src/bitmap/_libs
	-rm -rf src/builtins/.libs src/builtins/_libs
	-rm -rf src/fc/.libs src/fc/_libs
	-rm -rf src/fontfile/.libs src/fontfile/_libs
	-rm -rf src/stubs/.libs src/stubs/_libs
	-rm -rf src/util/.libs src/util/_libs

distclean-libtool:
	-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
install-libXfontincludeHEADERS: $(libXfontinclude_HEADERS)
	@$(NORMAL_INSTALL)
	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(libXfontincludedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libXfontincludedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libXfontincludedir)" || exit $$?; \
	done

uninstall-libXfontincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(libXfontinclude_HEADERS)'; test -n "$(libXfontincludedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(libXfontincludedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	output_system_information () \
	{ \
          echo;                                     \
	  { uname -a | $(AWK) '{                    \
  printf "System information (uname -a):";          \
  for (i = 1; i < NF; ++i)                          \
    {                                               \
      if (i != 2)                                   \
        printf " %s", $$i;                          \
    }                                               \
  printf "\n";                                      \
}'; } 2>&1;                                         \
	  if test -r /etc/os-release; then          \
	    echo "Distribution information (/etc/os-release):"; \
	    sed 8q /etc/os-release;                 \
	  elif test -r /etc/issue; then             \
	    echo "Distribution information (/etc/issue):";      \
	    cat /etc/issue;                         \
	  fi;                                       \
	}; \
	please_report () \
	{ \
echo "Some test(s) failed.  Please report this to $(PACKAGE_BUGREPORT),";    \
echo "together with the test-suite.log file (gzipped) and your system";      \
echo "information.  Thanks.";                                                \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  output_system_information;                                    \
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(check_PROGRAMS) $(check_DATA)
	@$(am__rm_f) $(RECHECK_LOGS)
	@$(am__rm_f) $(RECHECK_LOGS:.log=.trs)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(check_PROGRAMS) $(check_DATA)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
test-pcf-repad.log: test-pcf-repad$(EXEEXT)
	@p='test-pcf-repad$(EXEEXT)'; \
	b='test-pcf-repad'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-pcf-props.log: test-pcf-props$(EXEEXT)
	@p='test-pcf-props$(EXEEXT)'; \
	b='test-pcf-props'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-pcf-bitmapscale.log: test-pcf-bitmapscale$(EXEEXT)
	@p='test-pcf-bitmapscale$(EXEEXT)'; \
	b='test-pcf-bitmapscale'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-pcf-encoding.log: test-pcf-encoding$(EXEEXT)
	@p='test-pcf-encoding$(EXEEXT)'; \
	b='test-pcf-encoding'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
test-pcf-norepad.log: test-pcf-norepad$(EXEEXT)
	@p='test-pcf-norepad$(EXEEXT)'; \
	b='test-pcf-norepad'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@	@p='$<'; \
@am__EXEEXT_TRUE@	$(am__set_b); \
@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	$(AM_V_at)$(MKDIR_P) "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-bzip3: distdir
	tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.bz3*) \
	  bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_DATA)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(DATA) $(HEADERS) \
		config.h
install-checkPROGRAMS: install-libLTLIBRARIES

installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libXfontincludedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-$(am__rm_f) $(TEST_LOGS)
	-$(am__rm_f) $(TEST_LOGS:.log=.trs)
	-$(am__rm_f) $(TEST_SUITE_LOG)
	-$(am__rm_f) src/util/reallocarray.$(OBJEXT)
	-$(am__rm_f) src/util/reallocarray.lo
	-$(am__rm_f) src/util/realpath.$(OBJEXT)
	-$(am__rm_f) src/util/realpath.lo
	-$(am__rm_f) src/util/strlcat.$(OBJEXT)
	-$(am__rm_f) src/util/strlcat.lo
	-$(am__rm_f) src/util/strlcpy.$(OBJEXT)
	-$(am__rm_f) src/util/strlcpy.lo

clean-generic:
	-$(am__rm_f) $(CLEANFILES)

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
	-$(am__rm_f) src/FreeType/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/FreeType/$(am__dirstamp)
	-$(am__rm_f) src/bitmap/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/bitmap/$(am__dirstamp)
	-$(am__rm_f) src/builtins/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/builtins/$(am__dirstamp)
	-$(am__rm_f) src/fc/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/fc/$(am__dirstamp)
	-$(am__rm_f) src/fontfile/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/fontfile/$(am__dirstamp)
	-$(am__rm_f) src/stubs/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/stubs/$(am__dirstamp)
	-$(am__rm_f) src/util/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) src/util/$(am__dirstamp)
	-$(am__rm_f) test/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) test/$(am__dirstamp)
	-$(am__rm_f) test/utils/$(DEPDIR)/$(am__dirstamp)
	-$(am__rm_f) test/utils/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-$(am__rm_f) $(MAINTAINERCLEANFILES)
@HAVE_PYTHON_FALSE@clean-local:
clean: clean-recursive

clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
	clean-libtool clean-local clean-noinstPROGRAMS mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f src/FreeType/$(DEPDIR)/ftenc.Plo
	-rm -f src/FreeType/$(DEPDIR)/ftfuncs.Plo
	-rm -f src/FreeType/$(DEPDIR)/fttools.Plo
	-rm -f src/FreeType/$(DEPDIR)/xttcap.Plo
	-rm -f src/bitmap/$(DEPDIR)/bdfread.Plo
	-rm -f src/bitmap/$(DEPDIR)/bdfutils.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmap.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmapfunc.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmaputil.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitscale.Plo
	-rm -f src/bitmap/$(DEPDIR)/fontink.Plo
	-rm -f src/bitmap/$(DEPDIR)/pcfread.Plo
	-rm -f src/bitmap/$(DEPDIR)/pcfwrite.Plo
	-rm -f src/bitmap/$(DEPDIR)/snfread.Plo
	-rm -f src/builtins/$(DEPDIR)/dir.Plo
	-rm -f src/builtins/$(DEPDIR)/file.Plo
	-rm -f src/builtins/$(DEPDIR)/fonts.Plo
	-rm -f src/builtins/$(DEPDIR)/fpe.Plo
	-rm -f src/builtins/$(DEPDIR)/render.Plo
	-rm -f src/fc/$(DEPDIR)/fsconvert.Plo
	-rm -f src/fc/$(DEPDIR)/fserve.Plo
	-rm -f src/fc/$(DEPDIR)/fsio.Plo
	-rm -f src/fc/$(DEPDIR)/fstrans.Plo
	-rm -f src/fontfile/$(DEPDIR)/bitsource.Plo
	-rm -f src/fontfile/$(DEPDIR)/bufio.Plo
	-rm -f src/fontfile/$(DEPDIR)/bunzip2.Plo
	-rm -f src/fontfile/$(DEPDIR)/catalogue.Plo
	-rm -f src/fontfile/$(DEPDIR)/decompress.Plo
	-rm -f src/fontfile/$(DEPDIR)/defaults.Plo
	-rm -f src/fontfile/$(DEPDIR)/dirfile.Plo
	-rm -f src/fontfile/$(DEPDIR)/fileio.Plo
	-rm -f src/fontfile/$(DEPDIR)/filewr.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontdir.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontfile.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontscale.Plo
	-rm -f src/fontfile/$(DEPDIR)/gunzip.Plo
	-rm -f src/fontfile/$(DEPDIR)/register.Plo
	-rm -f src/fontfile/$(DEPDIR)/renderers.Plo
	-rm -f src/stubs/$(DEPDIR)/atom.Plo
	-rm -f src/stubs/$(DEPDIR)/libxfontstubs.Plo
	-rm -f src/util/$(DEPDIR)/fontaccel.Plo
	-rm -f src/util/$(DEPDIR)/fontnames.Plo
	-rm -f src/util/$(DEPDIR)/fontutil.Plo
	-rm -f src/util/$(DEPDIR)/fontxlfd.Plo
	-rm -f src/util/$(DEPDIR)/format.Plo
	-rm -f src/util/$(DEPDIR)/miscutil.Plo
	-rm -f src/util/$(DEPDIR)/patcache.Plo
	-rm -f src/util/$(DEPDIR)/private.Plo
	-rm -f src/util/$(DEPDIR)/reallocarray.Plo
	-rm -f src/util/$(DEPDIR)/realpath.Plo
	-rm -f src/util/$(DEPDIR)/strlcat.Plo
	-rm -f src/util/$(DEPDIR)/strlcpy.Plo
	-rm -f src/util/$(DEPDIR)/utilbitmap.Plo
	-rm -f test/$(DEPDIR)/pcf-test-common.Po
	-rm -f test/$(DEPDIR)/test-pcf-bitmapscale.Po
	-rm -f test/$(DEPDIR)/test-pcf-encoding.Po
	-rm -f test/$(DEPDIR)/test-pcf-norepad.Po
	-rm -f test/$(DEPDIR)/test-pcf-props.Po
	-rm -f test/$(DEPDIR)/test-pcf-repad.Po
	-rm -f test/utils/$(DEPDIR)/font-test-utils.Po
	-rm -f test/utils/$(DEPDIR)/lsfontdir.Po
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-libXfontincludeHEADERS install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-libLTLIBRARIES

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f src/FreeType/$(DEPDIR)/ftenc.Plo
	-rm -f src/FreeType/$(DEPDIR)/ftfuncs.Plo
	-rm -f src/FreeType/$(DEPDIR)/fttools.Plo
	-rm -f src/FreeType/$(DEPDIR)/xttcap.Plo
	-rm -f src/bitmap/$(DEPDIR)/bdfread.Plo
	-rm -f src/bitmap/$(DEPDIR)/bdfutils.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmap.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmapfunc.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitmaputil.Plo
	-rm -f src/bitmap/$(DEPDIR)/bitscale.Plo
	-rm -f src/bitmap/$(DEPDIR)/fontink.Plo
	-rm -f src/bitmap/$(DEPDIR)/pcfread.Plo
	-rm -f src/bitmap/$(DEPDIR)/pcfwrite.Plo
	-rm -f src/bitmap/$(DEPDIR)/snfread.Plo
	-rm -f src/builtins/$(DEPDIR)/dir.Plo
	-rm -f src/builtins/$(DEPDIR)/file.Plo
	-rm -f src/builtins/$(DEPDIR)/fonts.Plo
	-rm -f src/builtins/$(DEPDIR)/fpe.Plo
	-rm -f src/builtins/$(DEPDIR)/render.Plo
	-rm -f src/fc/$(DEPDIR)/fsconvert.Plo
	-rm -f src/fc/$(DEPDIR)/fserve.Plo
	-rm -f src/fc/$(DEPDIR)/fsio.Plo
	-rm -f src/fc/$(DEPDIR)/fstrans.Plo
	-rm -f src/fontfile/$(DEPDIR)/bitsource.Plo
	-rm -f src/fontfile/$(DEPDIR)/bufio.Plo
	-rm -f src/fontfile/$(DEPDIR)/bunzip2.Plo
	-rm -f src/fontfile/$(DEPDIR)/catalogue.Plo
	-rm -f src/fontfile/$(DEPDIR)/decompress.Plo
	-rm -f src/fontfile/$(DEPDIR)/defaults.Plo
	-rm -f src/fontfile/$(DEPDIR)/dirfile.Plo
	-rm -f src/fontfile/$(DEPDIR)/fileio.Plo
	-rm -f src/fontfile/$(DEPDIR)/filewr.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontdir.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontfile.Plo
	-rm -f src/fontfile/$(DEPDIR)/fontscale.Plo
	-rm -f src/fontfile/$(DEPDIR)/gunzip.Plo
	-rm -f src/fontfile/$(DEPDIR)/register.Plo
	-rm -f src/fontfile/$(DEPDIR)/renderers.Plo
	-rm -f src/stubs/$(DEPDIR)/atom.Plo
	-rm -f src/stubs/$(DEPDIR)/libxfontstubs.Plo
	-rm -f src/util/$(DEPDIR)/fontaccel.Plo
	-rm -f src/util/$(DEPDIR)/fontnames.Plo
	-rm -f src/util/$(DEPDIR)/fontutil.Plo
	-rm -f src/util/$(DEPDIR)/fontxlfd.Plo
	-rm -f src/util/$(DEPDIR)/format.Plo
	-rm -f src/util/$(DEPDIR)/miscutil.Plo
	-rm -f src/util/$(DEPDIR)/patcache.Plo
	-rm -f src/util/$(DEPDIR)/private.Plo
	-rm -f src/util/$(DEPDIR)/reallocarray.Plo
	-rm -f src/util/$(DEPDIR)/realpath.Plo
	-rm -f src/util/$(DEPDIR)/strlcat.Plo
	-rm -f src/util/$(DEPDIR)/strlcpy.Plo
	-rm -f src/util/$(DEPDIR)/utilbitmap.Plo
	-rm -f test/$(DEPDIR)/pcf-test-common.Po
	-rm -f test/$(DEPDIR)/test-pcf-bitmapscale.Po
	-rm -f test/$(DEPDIR)/test-pcf-encoding.Po
	-rm -f test/$(DEPDIR)/test-pcf-norepad.Po
	-rm -f test/$(DEPDIR)/test-pcf-props.Po
	-rm -f test/$(DEPDIR)/test-pcf-repad.Po
	-rm -f test/utils/$(DEPDIR)/font-test-utils.Po
	-rm -f test/utils/$(DEPDIR)/lsfontdir.Po
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-libLTLIBRARIES \
	uninstall-libXfontincludeHEADERS uninstall-pkgconfigDATA

.MAKE: $(am__recursive_targets) all check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	am--depfiles am--refresh check check-TESTS check-am clean \
	clean-checkPROGRAMS clean-cscope clean-generic \
	clean-libLTLIBRARIES clean-libtool clean-local \
	clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-bzip3 dist-gzip dist-hook dist-lzip \
	dist-shar dist-tarZ dist-xz dist-zip dist-zstd distcheck \
	distclean distclean-compile distclean-generic distclean-hdr \
	distclean-libtool distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am \
	install-libLTLIBRARIES install-libXfontincludeHEADERS \
	install-man install-pdf install-pdf-am install-pkgconfigDATA \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck tags tags-am uninstall uninstall-am \
	uninstall-libLTLIBRARIES uninstall-libXfontincludeHEADERS \
	uninstall-pkgconfigDATA

.PRECIOUS: Makefile


@HAVE_PYTHON_TRUE@test/data/repad/evil-repad.pcf: $(srcdir)/test/gen_evil_pcf_repad.py
@HAVE_PYTHON_TRUE@	$(AM_V_GEN)$(PYTHON) $< test/data/repad

@HAVE_PYTHON_TRUE@test/data/props/evil-props.pcf: $(srcdir)/test/gen_evil_pcf_props.py
@HAVE_PYTHON_TRUE@	$(AM_V_GEN)$(PYTHON) $< test/data/props

@HAVE_PYTHON_TRUE@test/data/scale/evil-scale.pcf: $(srcdir)/test/gen_evil_pcf_bitmapscale.py
@HAVE_PYTHON_TRUE@	$(AM_V_GEN)$(PYTHON) $< test/data/scale

@HAVE_PYTHON_TRUE@test/data/encoding/evil-encoding.pcf: $(srcdir)/test/gen_evil_pcf_encoding.py
@HAVE_PYTHON_TRUE@	$(AM_V_GEN)$(PYTHON) $< test/data/encoding

@HAVE_PYTHON_TRUE@test/data/norepad/evil-norepad.pcf: $(srcdir)/test/gen_evil_pcf_norepad.py
@HAVE_PYTHON_TRUE@	$(AM_V_GEN)$(PYTHON) $< test/data/norepad
@HAVE_PYTHON_TRUE@clean-local:
@HAVE_PYTHON_TRUE@	-rmdir $(TEST_FONT_DIRS) test/data 2>/dev/null || true

.PHONY: ChangeLog INSTALL

INSTALL:
	$(INSTALL_CMD)

ChangeLog:
	$(CHANGELOG_CMD)

dist-hook: ChangeLog INSTALL

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
