% arara: pdflatex: { files: [latexindent]}
\subsubsection{The remaining code blocks}
 Referencing the different types of code blocks in \vref{tab:code-blocks}, we have a few
 code blocks yet to cover; these are very similar to the \texttt{commands} code block type
 covered comprehensively in \vref{subsubsec:commands-arguments}, but a small discussion
 defining these remaining code blocks is necessary.

 \paragraph{keyEqualsValuesBracesBrackets}
  \texttt{latexindent.pl} defines this type of code block by the following criteria:
  \begin{itemize}
   \item it must immediately follow either \lstinline!{! OR \lstinline![! OR \lstinline!,! with
         comments and blank lines allowed.
   \item then it has a name made up of the characters detailed in \vref{tab:code-blocks};
   \item then an $=$ symbol;
   \item then at least one set of curly braces or square brackets (comments and line breaks
         allowed throughout).
  \end{itemize}
  See the \texttt{keyEqualsValuesBracesBrackets: follow} and
  \texttt{keyEqualsValuesBracesBrackets: name} fields of the fine tuning section in
  \vref{lst:fineTuning} \announce{2019-07-13}{fine tuning: keyEqualsValuesBracesBrackets}%

  An example is shown in \cref{lst:pgfkeysbefore}, with the default output given in
  \cref{lst:pgfkeys1:default}.

  \begin{minipage}{.45\textwidth}
   \cmhlistingsfromfile{demonstrations/pgfkeys1.tex}{\texttt{pgfkeys1.tex}}{lst:pgfkeysbefore}
  \end{minipage}%
  \hfill
  \begin{minipage}{.5\textwidth}
   \cmhlistingsfromfile[showtabs=true]{demonstrations/pgfkeys1-default.tex}{\texttt{pgfkeys1.tex} default output}{lst:pgfkeys1:default}
  \end{minipage}%

  In \cref{lst:pgfkeys1:default}, note that the maximum indentation is three tabs, and
  these come from:
  \begin{itemize}
   \item the \lstinline!\pgfkeys! command's mandatory argument;
   \item the \lstinline!start coordinate/.initial! key's mandatory argument;
   \item the \lstinline!start coordinate/.initial! key's body, which is defined as any lines
         following the name of the key that include its arguments. This is the part controlled by
         the \emph{body} field for \texttt{noAdditionalIndent} and friends from
         \cpageref{sec:noadd-indent-rules}.
  \end{itemize}
 \paragraph{namedGroupingBracesBrackets} This type of code block is mostly motivated by
  tikz-based code; we define this code block as follows:
  \begin{itemize}
   \item it must immediately follow either \emph{horizontal space} OR \emph{one or more line
         breaks} OR \lstinline!{! OR \lstinline![! OR \lstinline!$! OR \lstinline!)! OR
         \lstinline!(!
   \item the name may contain the characters detailed in \vref{tab:code-blocks};
   \item then at least one set of curly braces or square brackets (comments and line breaks
         allowed throughout).
  \end{itemize}
  See the \texttt{NamedGroupingBracesBrackets: follow} and
  \texttt{NamedGroupingBracesBrackets: name} fields of the fine tuning section in
  \vref{lst:fineTuning} \announce{2019-07-13}{fine tuning: namedGroupingBracesBrackets}%

  A simple example is given in \cref{lst:child1}, with default output in
  \cref{lst:child1:default}.

  \begin{minipage}{.45\textwidth}
   \cmhlistingsfromfile{demonstrations/child1.tex}{\texttt{child1.tex}}{lst:child1}
  \end{minipage}%
  \hfill
  \begin{minipage}{.5\textwidth}
   \cmhlistingsfromfile[showtabs=true]{demonstrations/child1-default.tex}{\texttt{child1.tex} default output}{lst:child1:default}
  \end{minipage}%

  In particular, \texttt{latexindent.pl} considers \texttt{child}, \texttt{parent} and
  \texttt{node} all to be \texttt{namedGroupingBracesBrackets}\footnote{ You may like to
  verify this by using the \texttt{-tt} option and checking \texttt{indent.log}! }.
  Referencing \cref{lst:child1:default}, note that the maximum indentation is two tabs, and
  these come from:
  \begin{itemize}
   \item the \lstinline!child!'s mandatory argument;
   \item the \lstinline!child!'s body, which is defined as any lines following the name of the
         \texttt{namedGroupingBracesBrackets} that include its arguments. This is the part
         controlled by the \emph{body} field for \texttt{noAdditionalIndent} and friends from
         \cpageref{sec:noadd-indent-rules}.
  \end{itemize}

 \paragraph{UnNamedGroupingBracesBrackets} occur in a variety of situations; specifically, we
  define this type of code block as satisfying the following criteria:
  \begin{itemize}
   \item it must immediately follow either \lstinline!{! OR \lstinline![! OR \lstinline!,! OR
         \lstinline!&! OR \lstinline!)! OR \lstinline!(! OR \lstinline!$!;
   \item then at least one set of curly braces or square brackets (comments and line breaks
         allowed throughout).
  \end{itemize}
  See the \texttt{UnNamedGroupingBracesBrackets: follow} field of the fine tuning section
  in \vref{lst:fineTuning} \announce{2019-07-13}{fine tuning: namedGroupingBracesBrackets}%

  An example is shown in \cref{lst:psforeach1} with default output give in
  \cref{lst:psforeach:default}.

  \begin{minipage}{.45\textwidth}
   \cmhlistingsfromfile{demonstrations/psforeach1.tex}{\texttt{psforeach1.tex}}{lst:psforeach1}
  \end{minipage}%
  \hfill
  \begin{minipage}{.5\textwidth}
   \cmhlistingsfromfile[showtabs=true]{demonstrations/psforeach1-default.tex}{\texttt{psforeach1.tex} default output}{lst:psforeach:default}
  \end{minipage}%

  Referencing \cref{lst:psforeach:default}, there are \emph{three} sets of unnamed braces.
  Note also that the maximum value of indentation is three tabs, and these come from:
  \begin{itemize}
   \item the \lstinline!\psforeach! command's mandatory argument;
   \item the \emph{first} un-named braces mandatory argument;
   \item the \emph{first} un-named braces \emph{body}, which we define as any lines following the
         first opening \lstinline!{! or \lstinline![! that defined the code block. This is the
         part controlled by the \emph{body} field for \texttt{noAdditionalIndent} and friends from
         \cpageref{sec:noadd-indent-rules}.
  \end{itemize}
  Users wishing to customise the mandatory and/or optional arguments on a \emph{per-name}
  basis for the \texttt{UnNamedGroupingBracesBrackets} should use \texttt{always-un-named}.

 \paragraph{filecontents} code blocks behave just as \texttt{environments}, except that
  neither arguments nor items are sought.

\subsubsection{Summary}
 \index{indentation!summary}
 Having considered all of the different types of code blocks, the functions of the fields
 given in \cref{lst:noAdditionalIndentGlobal,lst:indentRulesGlobal} should now make sense.
 \index{specialBeginEnd!noAdditionalIndentGlobal}
 \index{specialBeginEnd!indentRulesGlobal}

 \begin{widepage}
  \begin{minipage}{.47\linewidth}
   \cmhlistingsfromfile[style=noAdditionalIndentGlobal]{../defaultSettings.yaml}[before=\centering,yaml-TCB]{\texttt{noAdditionalIndentGlobal}}{lst:noAdditionalIndentGlobal}
  \end{minipage}%
  \hfill
  \begin{minipage}{.47\linewidth}
   \cmhlistingsfromfile[style=indentRulesGlobal]{../defaultSettings.yaml}[before=\centering,yaml-TCB]{\texttt{indentRulesGlobal}}{lst:indentRulesGlobal}
  \end{minipage}%
 \end{widepage}